| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | BOOM backhoe, for correct assembly and components, see Figure 9-038 | |
| 2 | D132494 | PIN,70mm OD x 331mm L | , Serial Range: Boom-dipper | |
| 3 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | |
| 4 | 135-823 | GROOVED PIN,1/2" x 3 1/4", Type E, Hardened | PIN GROOVED, 1/2" x 3 1/4", Type E, Hardened | |
| 5 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD), Boom to dipper 1.57mm Thk | |
| 6 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD) 3.05mm Thk | |
| 7 | D133632 | WASHER,45mm ID x 100mm OD x 8mm Thk | flat, hardened, special | |
| 8 | D120610 | NUT | hex, 1-3/4 NF, special | |
| 9 | REF | INSTRUCTION | CYLINDER ASSEMBLY dipper, for correct assembly and components, see Figure 8-132 - 8-135C | |
| 10 | REF | INSTRUCTION | CYLINDER ASSEMBLY bucket, for correct assembly and components, see Figure 8-136 - 8-139C | |
| 11 | D141666 | PIN,50mm OD x 199mm L | dipper and bucket, Serial Range: cylinder-dippers | |
| | Part of extendahoe inner dipper assembly kit P/N D103366. | | |
| 12 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1/13/16 x 3 x 1/8 inch, no longer used, order 495-81227 washer, Ref. 12A | |
| | Part of extendahoe inner dipper assembly kit P/N D103366. | | |
| 12a | 495-81227 | WASHER,52.38mm ID x 74.63mm OD x 1.7mm Thk | - flat, 2-1/16 x 2-15/16 x 1/16 inch | |
| 13 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | |
| 14 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pin (Replaces D25280) #175, Ext | |
| | Part of extendahoe inner dipper assembly kit P/N D103366. | | |
| 244536A1 | DIPPER | ASSEMBLY extension, inner, without grease seals at dipper pivot, Replaces: P/N D140889, Includes four P/N 132716A1 pads, one P/N 132842A1 shim, one P/N 132844A1 shim, one P/N 183443A1 pin, two P/N 183509A1 pin, Includes: Ref. 15, 16 and 17 | |
| | Part of extendahoe inner dipper assembly kit P/N D103366. | | |
| 15 | NSS | NOT SOLD SEPARAT | DIPPER inner | |
| 16 | D149079 | BUSHING,50.19mm ID x 60mm OD x 34mm L | 50 mm x 34 mm long, dipper cylinder rod end pivot | |
| 17 | D150121 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 70 mm x 36 mm long, to dipper pivot | |
| 18 | D147989 | BOOM | HOUSING dipper, outer, 8 mm thick side plates, without inner cylinder mounting reinforcement ears at bucket end, if used | |
| | The two washers welded to the inside of Ref. 18 and 18A at the coupler end are 495-81230. | | |
| 18a | 102649A1 | BOOM | HOUSING dipper, outer, if used | |
| | The two washers welded to the inside of Ref. 18 and 18A at the coupler end are 495-81230. | | |
| 19 | D127168 | BUSHING,44.6mm ID x 57.15mm OD x 94mm L | 45 mm ID x 94 mm long, bucket coupler pivot | |
| 134437A1 | COUPLING | COUPLER ASSEMBLY bucket, replaces D139084, Includes: Ref. 21 and 22 | |
| 20 | NSS | NOT SOLD SEPARAT | COUPLER backhoe bucket | |
| 21 | D127167 | BUSHING,57.34mm ID x 70mm OD x 30mm L | 1-3/16 inch, 30 mm long, special, at dipper | |
| 22 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8 inch, 28 mm, long, at bucket link | |
| 24 | D133865 | PLUG | plastic | |
| 25 | 1340969C1 | CYLINDER ASSY. | CYLINDER ASSEMBLY dipper extension, parts list Figure 8-140 | |
| 26 | D129892 | PIN | dipper extension cylinder closed end | |
| 27 | 800-44040 | SNAP RING,M40, Ext | RING snap, pin retaining | |
| 28 | D140247 | LOCK PIN,25.4mm OD x 232.6mm L | PIN, LOCK, Used at dipper extension cylinder closed end when transporting only, Used with Ref. 29 lock pin | |
| 29 | A33509 | PIN,11.18mm OD | lock | |
| D103366 | KEY | KIT extendahoe inner dipper assembly, Includes: Ref. 11, 12, 14, P/N 244536A1 on this figure and Ref. 43 - 48, 55, 56 on Figure 9-050 and an instruction sheet | |
