| № | Номер | Название | Опции | Альт |
|---|
| 1 | 360262A2 | CORE | Mounts In Blower Housing Box; Seal Mounts On Top Of Core On Models With Heat Only | |
| 2 | 400282A1 | HEATER TUBE | Front | |
| 3 | 1954736C1 | HOSE CLAMP,#24 | | |
| 4 | 377222A1 | HEATER HOSE,24mm ID x 100mm L | 100 mm; Cut from 97252CX | |
| 5 | 400379A1 | KNOB,23mm | | |
| 6 | A42561 | JAM NUT,Hex, 7/16" - 28, RH Thd | | |
| 7 | 388762A1 | BRACKET | | |
| 8 | 389402A1 | RUBBER STRIP | | |
| 9 | 276-26512 | SELF-TAP SCREW,Hex Hd, #10 x 3/4" | No. 10 x 3/4, st; If Used | |
| 9 | 276-14520 | SELF-TAP SCREW,Hex Hd, #10 x 1 1/4" | No 10 x 1,25; If Used | |
| 9a | 896-12006 | WASHER,6.4mm ID x 13mm OD x 2mm Thk | 6,6 x 12,5 x 2 mm | |
| 10 | 368801A2 | HEATER HOSE,24mm ID x 1361mm L, SAEJ2020R3 | 1361 mm; Cut from 97252CX | |
| 11 | 400280A1 | HEATER TUBE | Rear | |
| 12 | 368799A3 | HOSE,15.50 mm ID x 860.00 mm, SAE J20R3 Class D2 | Cut from 97252CX; If Used | |
| 12a | 448428A1 | HEATER HOSE,24mm ID x 1175mm L, SAEJ2020R3 | 1175 mm (46-1/4 in); Heater Valve to Core; Cut From 97252CX; If Used | |
| 13 | 368800A2 | HOSE,15.50 mm ID x 465.00 mm | Heater, If Used | |
| 13a | 448429A1 | HEATER HOSE,24mm ID x 150mm L, SAEJ2020R3 | 150 mm (5-29/32 in); Floor To Valve; Cut From 97252CX; If Used | |
| 14 | 1331087C1 | HEATER VALVE | Heater Control | |
| 15 | 1954626C1 | SPRING CLIP | | |
| 16 | 1999666C1 | CONTROL,862.4mm L | Heater; Includes 1999667C1, 1999668C1 | |
| 1999667C1 | CONTROL | | |
| 1999668C1 | CABLE,856mm L | | |
| 17 | 190675A1 | TUBE,15.88 mm OD, 295 mm Length | | |
| 18 | 377232A1 | HEATER HOSE,15.88 mm ID x 2840.00 mm, SAE J20, SAE 20R3 | Cut from 97252CX; No Longer Used; Order 377232A2, Ref 18A | |
| 18a | 377232A2 | HEATER HOSE | 2650 mm (104-21/46 in); Return to Water Pump; Cut from 97252CX | |
| 19 | 406287A1 | SEALING STRIP,19mm W x 736mm L x 19mm Thk | 19 x 19 x 736 mm; Location Of Seal On Models With Heat Only; On Models With Air Conditioning, Seal Is Located On Evaporator Core | |
| 20 | 301803R1 | SHUT-OFF VALVE | | |
| 21 | 221-89 | REDUCER,Hex, 1/2" x 3/8" NPT | Replaces Existing Plug | |
| 22 | L17985 | FITTING,3/8" - 18 NPT | If Used | |
| 23 | 221-1382 | ELBOW,90 Degree, Fem, 1/2" NPt x 3/8" NPT | If Used | |
| 23a | 221-190 | PIPE,Nipple, 1/2" NPT x 2" | 1/2 PT x 2; Replaces Existing Plug; If Used | |
| 24 | D132982 | PADDLE,26.87mm ID x 400mm L | 400 mm (15-3/4 in) | |
| 25 | L18337 | CABLE TIE,9.95"-12.1" lg | CABLE STRAP 15 in | |
| 26 | 353-410 | PLUG,Dome, .875" hole, Nylon | Models with Heat Only | |
| 27 | D143427 | CLAMP | | |
| 28 | 614-8030 | BOLT,Hex, M8 x 1.25 x 30mm, Cl 8.8, Full Thd | | |
| 29 | D143417 | SPACER,10.31mm ID x 15.88mm OD x 6.4mm L | | |
| 30 | 825-2408 | FLANGE NUT,M8 x 1.25, Flg, Cl 8 | | |
| 31 | 377233A1 | HEATER HOSE,15.88 mm ID x 1970.00 mm, SAE J20, SAE 20R3 | Cut from 97252CX; No Longer Used; Order 377233A2, Ref. 31A | |
| 31a | 377233A2 | HEATER HOSE | 1830 mm (72-3/64"); Inlet from Engine; Cut from 97252CX | |
| 32 | D88052 | CLAMP,25.4mm ID, 10.31mm Bolt Hole, P Type | | |
| 33 | 1987096C1 | PLATE | Below Heater Core; Location of Seal on Models with Heat Only; On Models with Air Conditioning, Seal is Located at Rear of Housing | |
| 34 | 217-144 | 45 ELBOW,45 Degree Elbow, 5/8" Hose Barb x 1/2" Male NPTF | | |
