CASE > HEAVY EQUIPMENT > WHEEL LOADERS > W > (W20C) - CASE WHEEL LOADER (NORTH AMERICA) (1/82-12/89) > (09) - CHASSIS/ATTACHMENTS > (9-078) - CAB GLASS AND MOLDINGS, CAB SERIAL NUMBER 53700 AND AFTER

№ Номер Название Опции Альт 1 NSS NOT SOLD SEPARAT GLASS - windshield 2 REF INSTRUCTION MOULDING - windshield, 140-1/8" (3559 mm) long, cut from L35717 bulk All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a). 3 NSS NOT SOLD SEPARAT GLASS - upper door 4 REF INSTRUCTION MOULDING - upper door glass, 91-1/8" (2315 mm) long, cut from L35717 bulk All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a). 5 NSS NOT SOLD SEPARAT GLASS - side panel 6 REF INSTRUCTION MOULDING - side panel glass, 76" (1930 mm) long, cut from L35717 bulk All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a). 7 NSS NOT SOLD SEPARAT GLASS - rear window 8 REF INSTRUCTION MOULDING - rear window glass, 97" (2464 mm) long, cut from L35717 bulk All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a). 9 NSS NOT SOLD SEPARAT GLASS - lower left-hand door and lower right-hand panel 10 REF INSTRUCTION MOULDING - lower glass, 73-1/2" (1867 mm) long, cut from L35717 bulk All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a). L35717 GASKET MOULDING - bulk, 50 ft. (15.2 m) roll All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).