| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | CYLINDER ASSEMBLY bucket, for correct assembly and components, see Figure 8-136 - 8-139C | |
| 2 | D138022 | PIN,50mm OD x 240mm L | Bucket cylinder closed, Serial Range: end-dipper | |
| | Either use two of Ref. 3 or two of Ref. 4 with D138022 pin. | | |
| 3 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1-13/16 x 3 x 1/8 inch, no longer used, order 495-81227 washer, Ref. 3A | |
| | Either use two of Ref. 3 or two of Ref. 4 with D138022 pin. | | |
| 3a | 495-81227 | WASHER,52.38mm ID x 74.63mm OD x 1.7mm Thk | - flat, 2-1/16 x 2-15/16 x 1/16 inch | |
| 4 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | |
| | Either use two of Ref. 3 or two of Ref. 4 with D138022 pin. | | |
| 5 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pin #175, Ext | |
| D145902 | DIPPER ASSEMBLY backhoe, used in production, for service order 102434A1 dipper kit on Figure 9-047A | | |
| D145904 | BOOM | DIPPER ASSEMBLY backhoe, includes seals, Ref. 23 below and Ref. 41 on Figure 9-046, no longer available, for service order 102434A1 dipper kit on Figure 9-047A | |
| D150784 | DIPPER | ASSEMBLY backhoe, without grease seals, no longer available, for service order 102434A1 dipper kit on Figure 9-047A | |
| 101631A1 | DIPPER | ASSEMBLY backhoe, used in production on tractor P.I.N. JJG0169123 and after, includes Ref. 10 and 12A only, for service order 102434A1 dipper kit on Figure 9-047A, Includes: Ref. 6 through 12A | |
| 6 | NSS | NOT SOLD SEPARAT | DIPPER backhoe | |
| 7 | D136565 | BUSHING,50.22mm ID x 70mm OD x 54mm L | 50 ID x 54 mm long, with slot for groove pin, right-hand side of dipper at dipper cylinder rod end pivot and bucket cylinder closed end pivot, D145904 dipper | |
| 8 | D137217 | BUSHING,50.19mm ID x 70mm OD x 54mm L | 50 x 70 x 54 mm long, without slot for groove pin, dipper cylinder rod end pivot and bucket cylinder closed end pivot, 2-4, on D145902, (two on D145904 dipper, four used on D150784 dipper | |
| 8a | D138047 | BUSHING,50.22mm ID x 60mm OD x 54mm L | 50 x 60 x 54 mm long, dipper cylinder rod end, used with 101631A1 dipper only, not included in 101631A1 dipper assembly, order separately | |
| 9 | D135740 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 70 ID x 36 mm long, to boom pivot, with groove for grease seals, D145902 or D145904 dipper, no longer used on D145902 dipper | |
| 9a | D150121 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 70 ID x 36 mm long, without groove for grease seals, if used; D150784 or 101631A1 dipper, not included in 101631A1 dipper assembly, order separately | |
| 10 | D120450 | PLUG | plastic | |
| 11 | D141249 | BUSHING,50.19mm ID x 70mm OD x 25.5mm L | 50 ID x 25 mm long, bucket link pivot, D145902 or D150784 dipper | |
| 12 | D136573 | BUSHING,50.19mm ID x 74mm OD x 40mm L | 50 ID x 36 mm long, bucket link pivot, D145904 dipper | |
| 12a | D140029 | BUSHING,50.22mm ID x 60mm OD x 25.5mm L | 50 x 60 x 25.5 mm long, 101631A1 dipper only | |
| 13 | D127168 | BUSHING,44.6mm ID x 57.15mm OD x 94mm L | 45 ID x 94 mm long, bucket coupler pivot, no longer included with dipper assembly, may need to order separately | |
| 134437A1 | COUPLING | COUPLER ASSEMBLY bucket, replaces D139084, Includes: Ref. 14, 15 and 16 | |
| 14 | NSS | NOT SOLD SEPARAT | COUPLER backhoe bucket | |
| 15 | D127167 | BUSHING,57.34mm ID x 70mm OD x 30mm L | 30 mm long, special, at dipper | |
| 16 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 28 mm long, at bucket link | |
