| № | Номер | Название | Опции | Альт |
|---|
| 1 | D147804 | FRAME | TOWER ASSEMBLY backhoe swing, prior to P.I.N. JJG0171285, no longer available, order 105929A1 tower, Ref. 1A | | | 1a | 105929A1 | FRAME | TOWER ASSEMBLY backhoe swing, P.I.N. JJG0171285 and after, Includes: Ref. 2 through 10 | | | 2 | D151072 | BUSHING,70.19mm ID x 94mm OD x 35.8mm L | 32 mm wide, boom cylinder pivot, replaces D144422 | | | 3 | D135742 | BUSHING,70.19mm ID x 94mm OD x 24mm L | inner, boom pivot | | | 4 | D135741 | BUSHING,70.19mm ID x 90mm OD x 24mm L | outer, boom pivot | | | 5 | D135557 | BUSHING,70.5mm ID x 86mm OD x 30mm L | upper, swing tower pivot | | | 6 | D135559 | BUSHING,70.19mm ID x 86mm OD x 28mm L | upper, tower pivot | | | 7 | D151073 | BUSHING,70.19mm ID x 86mm OD x 34mm L | tower pivot, replaces D138042 | | | 8 | D135559 | BUSHING,70.19mm ID x 86mm OD x 28mm L | 70 x 86 x 28 mm long, D147804 tower pivot, lower | | | 8a | D151074 | BUSHING,70.19mm ID x 86mm OD x 28mm L | 70 x 86 x 28 mm long, 105929A1 tower pivot, lower | | | 9 | D136570 | BUSHING,40.19mm ID x 55mm OD x 30mm L | upper, swing cylinder pivot | | | 10 | D136571 | BUSHING,40.19mm ID x 55mm OD x 38mm L | lower, swing cylinder pivot | | | 11 | REF | INSTRUCTION | CYLINDER ASSEMBLY swing, for correct assembly and components, see Figures 8-124 - 8-127A | | | 12 | D147894 | PIN | swing cylinder mounting, closed end | | | 13 | 413-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5 | | | | 14 | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 3/32") 1/2", SAE | | | 15 | D23740 | BUSHING | bolt | | | 16 | D146779 | PIN,40.04mm OD x 160mm L | swing cylinder rod end to swing tower | | | 17 | D144592 | WASHER,41mm ID | flat, 41 mm ID | | | 18 | 800-44040 | SNAP RING,M40, Ext | RING snap | | | 19 | 495-81276 | WASHER,1.31" ID x 1.75" OD x 0.07" Thk | flat, 1-5/16 x 1-3/4 x 1/16 inch | | | 20 | 103-16125 | SNAP RING,#125, Ext | Ring, Snap, , Pin #125, Ext | | | 21 | D136699 | WASHER | bearing, special, swing tower | | | 22 | D151065 | PIN,70mm OD x 152mm L | Lower, swing tower to frame, grease fitting mounts in top of pin, without groove pin, replaces D138038 | | | 23 | 800-40070 | SNAP RING,M70 Ext | RING snap, pin retaining, upper | | | 24 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD), Upper 3.05mm Thk | | | 25 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | 67 mm x 83 mm x 2 mm, lower | | | 26 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD) 1.57mm Thk | | | 27 | 800-40065 | SNAP RING,M65, Ext | RING snap, pin retaining, lower | | | 28 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | | | 29 | 105749A1 | PIN | swing tower to frame, upper, replaces D140657 | | | 30 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | | | 31 | 800-40065 | SNAP RING,M65, Ext | RING snap, pin retaining | | | 32 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | 67 mm x 83 mm x 2 mm | | | 33 | 426-888 | BOLT,Hex, 1/2" - 13 x 5-1/2", Gr 8 | hex, 1/2 NC x 5-1/2 inch, grade 8 | | | 34 | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 5/64") 1/2", SAE | | | 35 | 231-1448 | NUT,1/2"-13, GB | light hex, self-locking, 1/2 inch NC | | | 36 | D139603 | SPACER | pin mounting | | | 37 | D149239 | PIN | swing stop, without snap ring | | | 38 | D150498 | SHIM,3mm Thk | Pin, Swing cylinder 3mm Thk | | | 39 | D150452 | PLATE | shim retaining | | | 40 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 41 | 413-814 | BOLT,Hex, 1/2" - 13 x 7/8", Gr 5 | hex, 1/2 NC x 7/8 inch | | | 42 | D150497 | SHIM,1.6mm Thk | Pin, Swing cylinder 1.6mm Thk | | | 43 | 134167A1 | SHIM,72mm ID x 140mm OD x 2.05mm Thk | 2.05 mm thick, if used | |
|
|