(34) - MOUNTING PARTS, CYLINDERS, ARMS, AND BUCKETS, MOUNTING PARTS

№	Номер	Название	Опции
1	D20670	PLATE - mounting
2	14-1264	BOLT,Hex, 3/4" - 16 x 4", Gr 5	HHCS - 3/4 - 16 NF x 4 (45793)
3	92-12	LOCK WASHER,3/4"	WASHER, LOCK, (48452) 3/4"
4	25-1112	NUT,3/4"-16, G5	- hex (3/4 - 16 NF) (48107)
5	D20665	ARM - support, LH
6	D20666	ARM - support, RH
7	14-1656		HHCS - 1 - 14 NF x 3-1/2
8	11937	O-RING	NUT - lock (1 - 14 NF)
9	DR10002		BRACKET - frame to rear axle
10	14-10112	BOLT (MACHINE),Hex, 5/8" - 18 x 7", Gr 5	HHCS - 5/8 - 18 NF x 7
11	92-10	LOCK WASHER,5/8"	WASHER, LOCK, (48450) 5/8"
12	25-1110	NUT,5/8"-18, G5	- hex (5/8 - 18 NF) (48106)
13	D20680	ROD - tie
14	D20682	TUBE - spacer, tie rod
15	11935	O-RING	NUT - lock (3/4 - 16 NF)
16	38440	BRACKET - mounting
17	30634	BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L	- swing link
18	36121	BUSHING	- tower pivot, upper
19	70466	BUSHING	- tower pivot, lower
20	14-1640	BOLT,Hex, 1" - 14 x 2-1/2", Gr 5, Full Thd	HHCS - 1 - 14 NF x 2-1/2 (45837)
21	92-16	LOCK WASHER,1"	WASHER, LOCK, (48456) 1"
22	25-1116	NUT,1"-14, G5	- hex (1 - 14 NF) (48109)
23	36084	SCREW	REST - foot, LH
24	36085	O-RING	REST - foot, RH
25	36646	CASING, BEARING ROLL	PLATE - mounting, valve
26	14-828	BOLT,Hex, 1/2" - 20 x 1-3/4", Gr 5	HHCS - 1/2 - 20 NF x 1-3/4 (45709)
27	92-8	LOCK WASHER,1/2"	(48448) 1/2"
28	25-118	NUT,1/2"-20, G5	- hex (1/2 - 20 NF) (48104)
29	38464	SEPARATOR	CYLINDER - hydraulic stabilizer (See Figure 49)
30	34961		PIN - upper pivot, stabilizer cylinder
31	14-812	BOLT,Hex, 1/2" - 20 x 3/4", Gr 5	HHCS - 1/2 - 20 NF x 3/4 (45704), stabilizer
32	92-8	LOCK WASHER,1/2"	(48448), stabilizer 1/2"
33	35037	PIN - stabilizer, Serial Range: cylinder-arm
34	32625		WASHER - stabilizer pin (2-1/2" O.D. x 1-9/32" I.D. x 11/64")
35	132-152	PIN	- cotter (1/4 x 1-3/4) (48738), stabilizer
36	34629		PIN - mounting, stabilizer arm
37	14-812	BOLT,Hex, 1/2" - 20 x 3/4", Gr 5	HHCS - 1/2 - 20 NF x 3/4 (45704), stabilizer
38	92-8	LOCK WASHER,1/2"	(48448), stabilizer 1/2"
39	36269	ARM - stabilizer, RH
40	36270	ARM - stabilizer, LH
41	36266		LEG - stabilizer
42	35731	BUSHING	FOOT - stabilizer
43	36268	SPRING	PIN - stabilizer foot
44	O2072FH	X	ROLL PIN - stabilizer, foot (1/4 x 2) (138-142)
45	38679		PIN - stabilizer arm to lower leg
46	132-152	PIN	- cotter (1/4 x 1-3/4) (48738), swing
47	38374	WASHER	CYLINDER - hydraulic, swing (LH) (See Figure 48)
48	38375		CYLINDER - hudraulic, swing (RH) (See Figure 48)
49	D20158		LINK - swing, front
50	36088	LINK - swing, rear
51	30634	BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L	- rear swing link
52	D21342		BOLT - front swing link
53	131-370	LOCK NUT	NUT - lock (1 - 14 NF) (17585), swing
54	D21331		PIN - link to tower, swing
55	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, 1/8 NPT - straight (Lincoln #5000) (49200), swing
56	14-812	BOLT,Hex, 1/2" - 20 x 3/4", Gr 5	HHCS - 1/2 - 20 NF x 3/4 (45704), swing
57	92-8	LOCK WASHER,1/2"	(48448), swing 1/2"
58	36260	X	BOLT - swing, Serial Range: cylinder-link
59	131-370	LOCK NUT	NUT - lock (1 - 14 NF) (17585), swing
60	35031	PIN	- pivot, swing cylinder
61	14-812	BOLT,Hex, 1/2" - 20 x 3/4", Gr 5	HHCS - 1/2 - 20 NF x 3/4 (45704), swing
62	92-8	LOCK WASHER,1/2"	(48448), swing 1/2"
63	219-40	LUBE NIPPLE,65 Degree Elbow, 1/8" - 27 NPTF	FITTING - grease, 1/8 NPT - 67-1/2 degrees (Lincoln #5300) (49215), swing
64	36113	TRACK ROD ASSY	TOWER - boom
65	31139	X	BUSHING - boom pivot, tower
66	D21282		SPACER - bushings, tower & boom
67	34895		PIN - tower to mounting bracket, boom
68	219-55	LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF	NIPPLE, LUBE, (Lincoln #5400) (49217), Tower & boom 90º, 1/8" NPT x .84" lg
69	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), tower & boom
70	92-8	LOCK WASHER,1/2"	(48448), tower & boom 1/2"
71	36156		PIN -, Serial Range: boom-tower
71a	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, 1/8 NPT - straight (Lincoln #5000) (49200), tower & boom
72	14-812	BOLT,Hex, 1/2" - 20 x 3/4", Gr 5	HHCS - 1/2 - 20 NF x 3/4 (45704), tower & boom
73	92-8	LOCK WASHER,1/2"	(48448), tower & boom 1/2"
74	34948	WASHER - boom, lower (3" O.D. x 13/16" I.D.), tower
75	14-1220		HHCS - 3/4 - 16 NF x 1-1/4 (45782), tower & boom
76	92-12	LOCK WASHER,3/4"	WASHER, LOCK, (48452), Tower & boom 3/4"
77	36098		BOOM, tower
78	30613	BUSHING,38.33mm ID x 44.45mm OD x 17.6mm L	- pin, upper end, tower & boom
79	34896	PIN - dipper arm to boom, tower
80	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), tower & boom
81	92-8	LOCK WASHER,1/2"	(48448), tower & boom 1/2"
82	38617		WASHER - boom, upper (2-1/2" O.D. x 13/16" I.D.), tower
83	14-1220		HHCS - 3/4 - 16 NF x 1-1/4 (45782), tower & boom
84	92-12	LOCK WASHER,3/4"	WASHER, LOCK, (48452), Tower & boom 3/4"
85	34949		PIN - boom, Serial Range: cylinder-tower
86	49870	BOLT	PIN - driv-lok (3/8 x 2-1/2 - type E), tower & boom
87	36070	TOY	CYLINDER - hydraulic, boom (See Figure 51), tower
88	34897		PIN - boom cylinder to, tower
89	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), tower & boom
90	92-8	LOCK WASHER,1/2"	(48448), tower & boom 1/2"
91	36030	ROLLER	ARM - dipper
92	31148		BUSHING - dipper, Serial Range: arm-boom
93	30634	BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L	- bucket and link pins to dipper arm
94	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, 1/8 NPT - straight (Lincoln #5000) (49200), dipper arm
95	31109	PIN ASSY.	PIN - dipper arm, cylinder
96	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), dipper arm
97	92-8	LOCK WASHER,1/2"	(48448), dipper arm 1/2"
98	36770	CYLINDER - hydraulic, dipper arm (See Figure 50)
99	D20285	PIN - dipper arm, Serial Range: cylinder-boom
100	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), dipper arm
101	92-8	LOCK WASHER,1/2"	(48448), bucket 1/2"
102	30530	BOLT,Hex Flg, 5/16" - 18 x 2 1/4"	CYLINDER - hydraulic, bucket dump (See Figure 52)
103	31109	PIN ASSY.	PIN - bucket cylinder to dipper arm
104	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), bucket
105	92-8	LOCK WASHER,1/2"	(48448), bucket 1/2"
106	34973		LINK - bucket
107	30634	BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L	- bucket link
108	34974		LINK - bucket dump
109	30634	BUSHING,32.05mm ID x 38.18mm OD x 17.6mm L	- dump link, bucket
110	34999		PIN - 34973 links, bucket
111	32625		WASHER - pin (2-1/2" O.D. x 1-9/32" I.D. x 11/64"), bucket
112	132-152	PIN	- cotter (1/4 x 1-3/4) (48738), bucket
113	35288		PIN - dipper, Serial Range: arm-bucket
114	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), bucket
115	92-8	LOCK WASHER,1/2"	(48448), bucket 1/2"
116	35290	PIN	- bucket dump, Serial Range: link-bucket
117	14-816	BOLT,Hex, 1/2" - 20 x 1", Gr 5	HHCS - 1/2 - 20 NF x 1 (45706), bucket
118	92-8	LOCK WASHER,1/2"	(48448), bucket 1/2"
119	D20807M	BUCKET - (14") Machinery item
	37289	BLADE - cutting, D20807M bucket
119	37535M	BUCKET - (16") Machinery item (Use D20808M)
119	D20808M	BUCKET - (16") Machinery item (Replaces 37535M)
	36894	BLADE - cutting, 37535M and D20808 buckets
120	37698M	BUCKET - bellhole (16") Machinery item
	37696		BLADE - cutting, 37698M bucket
119	D20809M	BUCKET - (19") Machinery item (Standard)
	35282	FINGER	BLADE - cutting, D20809M bucket
	35271M	BUCKET - (24") Machinery item (Use D20810M)
119	D20810M	BUCKET - (24") Machinery item (Replaces 35271M)
	35277	KNIFE	BLADE - cutting, 35271M and D20810M buckets
	35293M	BUCKET - (30") Machinery item (Use D20811M)
119	D20811M	BUCKET - (30") Machinery item (Replaces 35293M)
	35294		BLADE - cutting, 35293M and D20811M buckets
120	37446M	BUCKET - bellhole (30") Machinery item
	37448	BLADE - cutting, 37446M bucket
120	D20461M	BUCKET - bellhole and graveyard (36") Machinery item
	D20453	BLADE - cutting, D20461M bucket
121	37910M	BUCKET - graveyard (38") Machinery item
	37908	BLADE - cutting, 37910M bucket
122	35204		SHANK - bucket teeth (4 for 14", 16", 19"; 5 for 24"; 6 for 30"; 8 for 36", 38" buckets) (Included with all buckets)
123	35205	X	TOOTH - bucket (4 for 14", 16", 19"; 5 for 24"; 6 for 30"; 8 for 36" and 38" buckets) (Included with all buckets)