| № | Номер | Название | Опции | Альт |
|---|
| 1 | D135391 | CHASSIS | loader or demountable backhoe models only, no longer available, for service order D140808 chassis, 1, A51390 cap, 1, N8796 breather, and, 2, 41-1020 expansion plugs, Includes: Ref. 2 thru 4D | | | 1a | D140808 | CHASSIS | loader or demountable backhoe models only, service replacement for D135391 chassis, Includes: Ref. 2 through 4D | | | 2 | D129061 | BUSHING,44.68mm ID x 57.15mm OD x 52.3mm L | loader frame pivot | | | 3 | D127542 | BUSHING,50.2mm ID x 60mm OD x 30mm L | front axle pivot | | | 4 | 221-15 | PLUG,Sq Hd, 3/4"-14 | square head, 3/4" NPT, hydraulic oil and diesel fuel drain, D135391 chassis | | | 4a | 444789 | PLUG,Sq Soc, 1/2"-14 NPTF | pipe, 1/2" NPT, used with D140808 chassis | | | 4b | D140713 | PLUG | square socket head, 1-1/4" NPT, without O-ring, used with D140808 chassis, no longer used, order 218-5161 plug | | | 4c | 218-5161 | PLUG,Hex Hd, 1 5/8"-12 ORB | hex head, 1-1/4" NPT, with O-ring, used with D140808 chassis, Includes: Ref. 4D | | | 4d | 237-6020 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | 20-1, 90 Duro, 1.475" ID x .118" Thk, Plug | | | 5 | D133192 | FRAME | CHASSIS, loader with integral backhoe models only, used before tractor P.I.N. No. 17425205, Includes: Ref. 6 thru 12A | | | 5a | D140807 | CHASSIS | loader with integral backhoe models only, used on tractor P.I.N. No. 17425205 and after, Includes: Ref. 6 through 12A | | | 6 | D129061 | BUSHING,44.68mm ID x 57.15mm OD x 52.3mm L | loader frame pivot | | | 7 | D127542 | BUSHING,50.2mm ID x 60mm OD x 30mm L | front axle pivot | | | 8 | 221-15 | PLUG,Sq Hd, 3/4"-14 | square head, 3/4" NPT, hydraulic oil and diesel fuel drain, used with D133192 chassis | | | 8a | D140713 | PLUG | square socket head, 1-1/4" NPT, without O-ring, used with D140807 chassis, no longer used, order 218-5161 plug | | | 8b | 218-5161 | PLUG,Hex Hd, 1 5/8"-12 ORB | hex head, 1-1/4" NPT, with O-ring, used with D140807 chassis, Includes: Ref. 8C | | | 8c | 237-6020 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | 20-1, 90 Duro, 1.475" ID x .118" Thk, Plug | | | 9 | D135555 | BUSHING,70.19mm ID x 90mm OD x 32mm L | upper, backhoe frame, swing tower mounting | | | 10 | D135556 | BUSHING,70.19mm ID x 90mm OD x 38mm L | lower, backhoe frame, swing tower mounting | | | 11 | D136472 | SPACER | 3-1/4", 83 mm, ID x 5-5/16", 135 mm, OD x 1/4", 6 mm, thick, bearing, Serial Range: welds-frame | | | 12 | D43940 | BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L | lower, side, backhoe frame, at stabilizer leg mounting | | | 12a | 444789 | PLUG,Sq Soc, 1/2"-14 NPTF | pipe, 1/2" NPT, used with D140807 chassis | | | 13 | D133285 | CAP | diesel fuel reservoir, left-hand, used with D135391 or D133192 chassis | | | 13 | A51390 | CAP | diesel fuel reservoir, left-hand, used with D140807 or D140808 chassis | | | | P/N A51390 is a 2-3/4" OD regular cap. You can also use P/N A32120 which is a 2-3/4" OD locking cap or you can order P/N A46523 kit, extension tube w/cap | | | | 14 | D93981 | FILLER CAP | CAP hydraulic oil reservoir, right-hand | | | 15 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | GREASE FITTING, 45 degree, special short, 1/8" NPT, loader frame pivot | | | 16 | D63875 | PLUG | SIGHT GAUGE oil level | | | 17 | 41-1020 | PLUG,Cup, 1 1/4" | EXPANSION PLUG cup, 1-1/4" | | | 18 | N8796 | PLUG | BREATHER vent, hydraulic oil reservoir | | | 19 | D140609 | HOSE | 5/8" ID x 15/16" OD x 4-9/16" long, vent, used with D140807 or D1408089 chassis | | | 20 | D140872 | COLLAR CLAMP | CLAMP wire form, vent hose | |
|
|