| № | Номер | Название | Опции | Альт |
|---|
| 28 | D140247 | LOCK PIN,25.4mm OD x 232.6mm L | PIN, LOCK, Used at dipper extension cylinder closed end when transporting only, Used with Ref. 29 lock pin | |
| 29 | A33509 | PIN,11.18mm OD | lock | |
| 30 | D141468 | PITMAN | LINK bucket guide, with 1" long bushing, Includes: Ref. 31 | |
| 31 | D140029 | BUSHING,50.22mm ID x 60mm OD x 25.5mm L | 2" (50 mm) ID x 2-3/8" (60 mm) OD x 1" (25 mm) long | |
| 32 | D140007 | PITMAN | LINK bucket dump, with two bushings at forked end, Includes: Ref. 33 and 34 | |
| 33 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8", 28 mm, long | |
| 34 | D138047 | BUSHING,50.22mm ID x 60mm OD x 54mm L | 2-1/8", 54 mm, long | |
| 35 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING straight, 1/8" NPT | |
| 36 | D123655 | SEAL,50mm ID x 60.15mm OD x 4.06mm Thk | grease | |
| 37 | D141142 | PIN,50mm OD x 306mm L | 12-3/64", (306 mm) long, Bucket cylinder rod end to links and, Serial Range: links-dipper | |
| 38 | 495-81282 | WASHER,2 1/16" x 3" x .109" | flat, 2-1/16" ID x 3" O.D. x 1/8" thick | |
| 39 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 40 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING straight, 1/8" NPT | |
| 41 | D135692 | AXLE PIN | PIN dump link to bucket coupler | |
| 42 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | flat, 1-3/4" bolt size, 1-13/16" ID x 2-1/2" O.D. x 1/8" thick | |
| 43 | 392181R1 | SPLIT PIN/SAFETY PIN,11.13mm OD | PIN lock | |
| 44 | D140874 | BLOCK | SHIM, 1/16", 1.6 mm, thick, wear plate | |
| | Part of Service Kit P/N D103366 | | |
| 45 | D140873 | BLOCK | SHIM, 1/32", .8 mm, thick, wear plate | |
| | Part of Service Kit P/N D103366 | | |
| 46 | D140885 | BLOCK | SHIM, 1/32", .8 mm, thick, wear plate | |
| | Part of Service Kit P/N D103366 | | |
| 47 | D140886 | SHIM,116mm OD x 1.6mm Thk | SHIM, 1/16", 1.6 mm, thick, wear plate | |
| | Part of Service Kit P/N D103366 | | |
| 48 | D141998 | LARGE PLATE | WEAR PLATE plastic, outer | |
| | Part of Service Kit P/N D103366 | | |
| 49 | 121-228 | SERRATED BOLT,Hex, 3/8" - 16 x 3/4" | | |
| | Part of Service Kit P/N D103366 | | |
| 50 | D143167 | WASHER | special | |
| | Part of Service Kit P/N D103366 | | |
| 51 | D143961 | FLANGE BOLT,Hex, 3/8"-16 x 1/2", Serr | BOLT hex flange head, self-locking, 3/8" - 16 NC x 1/2", plated | |
| | Part of Service Kit P/N D103366 | | |
| 52 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | flat, 3/8 inch | |
| D103366 | KEY | KIT service for D139848 and D143299 extendahoe inner dipper assemblies, Includes: Ref. 44, 45, 46, 47, 48, 49, 50 and 51 in this figure and parts in Figure 09-512, plus an instruction sheet | |
