| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | BOOM backhoe, see Figure 09-488 | |
| 2 | D132494 | PIN,70mm OD x 331mm L | , Serial Range: Boom-dipper | |
| 3 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING straight, 1/8" NPT, both ends of Ref. 2 pin | |
| 4 | 135-823 | GROOVED PIN,1/2" x 3 1/4", Type E, Hardened | PIN GROOVED, , Center groove 1/2" x 3 1/4", Type E, Hardened | |
| 5 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD), (2-27/32" ID x 3-1/2" OD x 1/16" thk), Boom to dipper 1.57mm Thk | |
| 6 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD) (2-27/32" ID x 3-1/2" OD x 1/8" thk) 3.05mm Thk | |
| 7 | D133632 | WASHER,45mm ID x 100mm OD x 8mm Thk | flat, hardened, special | |
| 8 | D120610 | NUT | hex, 1-3/4" - 12 NF, special | |
| 9 | REF | INSTRUCTION | CYLINDER dipper, for correct assembly and components, see Figure 08-426 or 08-428 | |
| 10 | G110597 | CYLINDER | bucket, see Figure 08-430 | |
| 10 | 235916A1R | REMAN-HYD CYLINDER | Reman New PN G110597 | |
| 10 | 235916A1C | CORE-HYD CYLINDER | Return Number | |
| 11 | D141666 | PIN,50mm OD x 199mm L | dipper and bucket, Serial Range: cylinder-dippers | |
| 12 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1-13/16" ID x 3" O.D. x 1/8" thick | |
| | Either use two of Ref. 12 or two of Ref. 13 with P/N D141666 pin. | | |
| 13 | 495-81279 | WASHER,1.81" ID x 2.75" OD x 0.13" Thk | flat, 1-13/16" ID x 2-3/4" O.D. x 1/8" thick, plated | |
| | Either use two of Ref. 12 or two of Ref. 13 with P/N D141666 pin. | | |
| 14 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| D143299 | DIPPER ASSEMBLY extension, inner, used in production, for service order D103366 kit in Figure 09-512, Includes: Ref. 15 thru 18 | | |
| 15 | NSS | NOT SOLD SEPARAT | DIPPER inner, with four tapped holes for shims on lower member of inner extension | |
| 17 | D141389 | BUSHING | 2", 50 mm ID x 1-11/32", 34 mm long, without slots for groove pin, dipper cylinder rod end pivot | |
| 18 | D135740 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 2-3/4", 70 mm ID x 1-7/16", 36 mm long, boom to dipper pivot | |
| D143336 | DIPPER HOUSING ASSEMBLY backhoe, outer, used in production, for service order D141890 outer dipper in Figure 09-504, if used, Includes: Ref. 19 thru 20A | | |
| 19 | NSS | NOT SOLD SEPARAT | HOUSING dipper, outer | |
| 20 | D136846 | BUSHING | 2", 50 mm ID x 1-11/32", 34 mm long, bucket cylinder closed end pivot, D129900 or D141890 dipper housing | |
| 20a | D141389 | BUSHING | 2", 50 mm ID x 1-11/32", 34 mm long, without slots for groove pin, bucket cylinder closed end pivot | |
| D143181 | END CAP COUPLER ASSEMBLY dipper, used in production, for service order D141893 end cap coupler in Figure 09-504, if used, Includes: Ref. 21 thru 27 | | |
| 21 | D141892 | HOUSING | END CAP D141893 end cap coupler assembly, dipper | |
| | For weld-on repair end cap order P/N D103585, refer to Service Bulletin NLB SB 012 89 | | |
| 22 | D141249 | BUSHING,50.19mm ID x 70mm OD x 25.5mm L | 2" (50 mm) ID x 1" (25 mm) long, guide link pivot | |
| 24 | D127168 | BUSHING,44.6mm ID x 57.15mm OD x 94mm L | 1-3/4", 45 mm ID x 3-11/16", 94 mm long, bucket coupler pivot | |
| D139084 | CLIP, SPRING | COUPLER ASSEMBLY bucket, Includes: Ref. 25 thru 27 | |
| 25 | NSS | NOT SOLD SEPARAT | COUPLER backhoe bucket | |
| 26 | D127167 | BUSHING,57.34mm ID x 70mm OD x 30mm L | 1-3/16", 30 mm long, special, at dipper | |
| 27 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8", 28 mm long, at bucket link | |
| 28 | 166-151 | 12 PT SCREW,Flg, 7/8" - 9 x 2", Gr 8 | BOLT Ferry head, 7/8" - 9 NC x 2", grade 8, if used | |
| 29 | D34667 | WASHER,23.02mm ID x 38.1mm OD x 3.57mm Thk | flat, 7/8", hardened, if used | |
| 30 | D138343 | PLATE | WEAR PLATE plastic | |
| 31 | D133865 | PLUG | plastic | |
| 32 | REF | INSTRUCTION | CYLINDER dipper extension, see Figure 08-432 | |
| 33 | D129892 | PIN | dipper extension cylinder closed end | |
| 34 | 800-44040 | SNAP RING,M40, Ext | RING snap, pin retaining | |
