| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101188 | JACK BODY | CYLINDER ASSEMBLY, 2-1/2, 64, ID x 6-19/64 inch, 160 mm, stroke, tilt, Includes: Ref. 2 through 27, P/N G104915 and P/N NSS above Ref. 21 | |
| 2 | G32313 | TUBE,14.43" L | ASSEMBLY cylinder, Includes: Ref. 3 | |
| 3 | D34359 | BUSHING,25.63mm ID x 34.92mm OD x 15.75mm L | tube | |
| G104915 | GLAND | ASSEMBLY cylinder, has smooth outer lip, no longer available, order Ref. 21, 1542939C1 gland and 1543250C1 seal kit, Includes: Ref. 4 through 10 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND cylinder | |
| 5 | G102569 | PLUG | nylon, thread locking, gland, if used | |
| 6 | D95141 | WIPER SEAL | WIPER piston rod | |
| | Part of seal kit P/N G109475. | | |
| 7 | D36968 | SEAL,31.72mm ID x 44.58mm OD x 10.69mm Thk | U-cup, piston rod, wide | |
| | Part of seal kit P/N G109475. | | |
| 7 | G100775 | SEAL | U-cup, piston rod, service option - severe heat or cold | |
| 8 | G109092 | SEAL,31.37mm ID x 44.63mm OD x 3.05mm Thk | buffer, grooved, piston rod, narrow | |
| | Part of seal kit P/N G109475. | | |
| | Part of seal kit P/N 1543250C1. | | |
| 9 | G32129 | BACK-UP RING,63.25mm ID x 69.35mm OD x 1.4mm Thk | backup, gland O-ring | |
| | Part of seal kit P/N G109475. | | |
| 10 | A28318 | O-RING,0.139" Thk x 2.484" ID, -230, Cl 5, 75 Duro | gland | |
| | Part of seal kit P/N G109475. | | |
| 10a | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 ", If used | |
| 11 | G33352 | ROD | ASSEMBLY- piston, 1-1/4 inch, 32 mm, diameter, Includes: Ref. 12 and 13 | |
| 12 | D22200 | BEARING,25.4mm ID x 36.5mm OD x 22.23mm L | BUSHING piston rod, self-aligning | |
| 13 | 100-21162 | SNAP RING,1.625", Int, #162 | Ring, Snap, (Replaces D27833) 1.625", Int, #162 | |
| 14 | G100708 | PISTON | cylinder | |
| 15 | G102289 | SEAL,59.92mm ID x 64.64mm OD x 6.96mm Thk | piston | |
| | Part of seal kit P/N G109475. | | |
| | Part of seal kit P/N 1543250C1. | | |
| 16 | G100713 | SEALING RING,Square, 5.28mm Thk x 49.91mm ID | RING backup, piston seal | |
| | Part of seal kit P/N G109475. | | |
| | Part of seal kit P/N 1543250C1. | | |
| 17 | G100714 | RING | wear, piston | |
| | Part of seal kit P/N G109475. | | |
| | Part of seal kit P/N 1543250C1. | | |
| 18 | 25863R1 | BOLT,Hex, 3/4" - 16 x 2 1/2", Gr 8 | - hex, 3/4 NF x 2-1/2 inch, grade 8, replaces 28-1240 | |
| 19 | G32317 | WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk | hardened | |
| 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | |
| NSS | NOT SOLD SEPARAT | GLAND ASSEMBLY cylinder, Includes: Ref. 21 through 27 | |
| 21 | 1542939C1 | CYLINDER END CAP | GLAND cylinder, has identification groove on outer lip | |
| 22 | D95141 | WIPER SEAL | WIPER piston rod | |
| | Part of seal kit P/N 1543250C1. | | |
| 23 | 1542873C1 | PACKAGE | KIT seal, NSS, not shown, Includes: Ref. 24 and 25 | |
| | Part of seal kit P/N 1543250C1. | | |
| 24 | 1543006C1 | SEAL rod, NSS, order 1543250C1 kit below | | |
| | Part of seal kit P/N 1543250C1. | | |
| 25 | 1543005C1 | SEAL buffer, NSS, order 1543250C1 kit below | | |
| | Part of seal kit P/N 1543250C1. | | |
| 26 | 238-5230 | O-RING,0.139" Thk x 2.484" ID, -230, Cl 5, 75 Duro | | |
| | Part of seal kit P/N 1543250C1. | | |
| 27 | G32129 | BACK-UP RING,63.25mm ID x 69.35mm OD x 1.4mm Thk | backup, gland O-ring | |
| | Part of seal kit P/N 1543250C1. | | |
| G109475 | GASKET KIT | KIT seal, Includes: Ref. 6, 7 of P/N D36968, 8 - 10 and 15 - 17, no longer available, order 1543250C1 seal kit below | |
| 1543250C1 | SEAL KIT | KIT seal, Includes: Ref. 8, 15 - 17, 22 - 27 and an instruction sheet | |
