(09-504) - EXTENDABLE DIPPER, TWO-PIECE OUTER MEMBER, PRIOR TO TRACTOR P.I.N. JJG0012415

№	Номер	Название	Опции
1	REF	INSTRUCTION	BOOM backhoe, see Figure 09-488
2	D132494	PIN,70mm OD x 331mm L	, Serial Range: Boom-dipper
3	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT, both ends of Ref. 2 pin
4	135-823	GROOVED PIN,1/2" x 3 1/4", Type E, Hardened	PIN GROOVED, , Center groove 1/2" x 3 1/4", Type E, Hardened
5	D136391	SHIM,72mm ID x 89mm OD x 1.57mm Thk	(M72 ID x 89 OD), (2-27/32" ID x 3-1/2" OD x 1/16" thk) 1.57mm Thk
6	D136392	SHIM,72mm ID x 89mm OD x 3.05mm Thk	(M72 ID x 89 OD) (2-27/32" ID x 3-1/2" OD x 1/8" thk) 3.05mm Thk
7	D133632	WASHER,45mm ID x 100mm OD x 8mm Thk	flat, hardened, special
8	D120610	NUT	hex, 1-3/4"-12 NF, special
9	REF	INSTRUCTION	CYLINDER dipper, for correct assembly and components, see Figures 08-426 or 08-428
10	REF	INSTRUCTION	CYLINDER bucket, see Figure 08-430
11	D133845	PIN	dipper and bucket, Serial Range: cylinder-dippers
12	135-824	GROOVED PIN,1/2" x 2 1/2", Type E, Hardened	PIN, GROOVED, , Center groove 1/2" x 2 1/2", Type E, Hardened
13	D133631	WASHER	flat, hardened, special
14	113-700	BOLT,Hex, 3/4" - 10 x 1", Gr 5
	D129902	BOOM	DIPPER ASSEMBLY inner extension, no longer used, order P/N D139848 dipper, (2 each) P/N D139861 and P/N D139862 shim, P/N D140260 plate and P/N 164-207 bolt, Includes: Ref. 15 thru 18
	D139848	HOUSING	DIPPER ASSEMBLY inner extension, no longer available, order P/N D103366 kit in Figure 09-512, Includes: Ref. 15 thru 18
15	D129904	MEMBER	DIPPER inner, for service order P/N D129902 dipper assembly
15a	NSS	NOT SOLD SEPARAT	DIPPER inner, P/N D139848 dipper
16	D136846	BUSHING	2" (50 mm) ID x 1-11/32" (34 mm) long, with slots, two used in P/N D129902 dipper and one used in P/N D139848 dipper
16a	D141389	BUSHING	2" (50 mm) ID x 1-11/32" (34 mm) long, without slots, may replace one P/N D136846 bushing in P/N D139848 dipper on some models
17	D127974	SEAL,67.46mm ID x 80.18mm OD x 3.56mm Thk	grease, P/N D129902 dipper only
		Ref. 17, P/N D127974 seal - OD is 3.15, ID is 2.75
18	D135740	BUSHING,70.19mm ID x 94mm OD x 40mm L	2-3/4" (70 mm) ID x 1-7/16" (36 mm) long
	D129900	HOUSING ASSY.	HOUSING ASSEMBLY dipper, outer, uses 3/4" hardware at end cap mounting, used with P/N D129901 end cap, no longer available, order P/N D141890 outer dipper, P/N 166-151 bolts and P/N D34667 washers, Includes: Ref. 19 thru 20A
	D141890	HOUSING ASSY.	HOUSING ASSEMBLY dipper, outer, uses 7/8" hardware at cap mounting, Includes: Ref. 19 thru 20A
19	NSS	NOT SOLD SEPARAT	HOUSING, P/N D129900 or P/N D141890 dipper, outer
20	D136846	BUSHING	2" ID x 1-11/32" long, P/N D129900 or P/N D141890 dipper
20a	D141389	BUSHING	2" ID x 1-11/32" long, without slots, may replace one P/N D136846 bushing in P/N D141890 dipper on some models
	D129901	HOUSING ASSY.	COUPLER ASSEMBLY end cap, uses 3/4" hardware, Ref. 28 and 29, no longer available, order P/N D141893 end cap, P/N 166-151 bolts and P/N D34667 washers, Includes: Ref. 21 thru 27
	D141893	HOUSING ASSY.	COUPLER ASSEMBLY end cap, uses 7/8" hardware, Ref. 29A and 29B, Includes: Ref. 21 thru 27
21	D129903	HOUSING	CAP end, P/N D129901 end cap, uses 3/4" hardware, Ref. 28 and 29, no longer available, order P/N D141892 end cap
21a	D141892	HOUSING	CAP end, P/N D141893 end cap, uses 7/8" hardware, Ref. 29A and 29B
		Ref. 21A - Refer to service bulletin NLB SB 012 89 for data on weld on end cap for early units that had the problem with the end caps coming loose. Kit P/N D103585
22	D136573	BUSHING,50.19mm ID x 74mm OD x 40mm L	2" (50 mm) ID x 1-7/16" (36 mm) long, guide link pivot
23	D123655	SEAL,50mm ID x 60.15mm OD x 4.06mm Thk	grease
24	D127168	BUSHING,44.6mm ID x 57.15mm OD x 94mm L	1-3/4" (45 mm) ID x 3-11/16" (94 mm) long
	D139084	CLIP, SPRING	COUPLER ASSEMBLY bucket, Includes: Ref. 25 thru 27
25	NSS	NOT SOLD SEPARAT	COUPLER backhoe bucket
26	D127167	BUSHING,57.34mm ID x 70mm OD x 30mm L	1-3/16" (30 mm) long, special, at dipper
27	D127172	BUSHING,44.75mm x 57.15mm OD x 28mm L	1-1/8" (28 mm) long, at bucket link
28	26-1232	BOLT,Hex, 3/4" - 10 x 2", Gr 8	if used Hex, 3/4"-10 x 2", G8
29	D34666	WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk	flat, 3/4", hardened, if used
29a	166-151	12 PT SCREW,Flg, 7/8" - 9 x 2", Gr 8	BOLT, Ferry head, 7/8"-9 NC x 2", grade 8
29b	D34667	WASHER,23.02mm ID x 38.1mm OD x 3.57mm Thk	flat, 7/8", hardened
30	D138343	PLATE	wear, plastic
31	D133865	PLUG	plastic
32	REF	INSTRUCTION	CYLINDER dipper extension, for correct assembly and components, see Figure 08-432
33	D129892	PIN	dipper extension cylinder closed end
34	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining
35	D129893	PIN	lock, used at dipper extension cylinder closed end when transporting only, used without Ref. 35B lock pin, no longer used, for service order P/N D140247 pin and P/N A33509 lock pin
35a	D140247	LOCK PIN,25.4mm OD x 232.6mm L	PIN, LOCK, Used at dipper extension cylinder closed end when transporting only, Used with Ref. 35B lock pin
35b	A33509	PIN,11.18mm OD	lock
36	D129227	PIN,40mm OD x 196mm L	- Dipper extension cylinder rod end
37	D127843	WASHER	flat, special, used as a shim
38	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining
39	D134486	LINK	bucket guide, with 1-13/32" long bushing, no longer available, order P/N D141468 link, Includes: Ref. 40
40	D136574	BUSHING,50.19mm ID x 70mm OD x 36mm L	2" (50 mm) ID x 2-3/4" (70 mm) OD x 1-13/32" (36 mm) long
40a	D141468	PITMAN	LINK bucket guide, with 1" long bushings, Includes: Ref. 40B
40b	D140029	BUSHING,50.22mm ID x 60mm OD x 25.5mm L	2" (50 mm) ID x 2-3/8" (60 mm) OD x 1" (25 mm) long
41	D127171	PITMAN	LINK bucket dump, with four bushings at forked end, no longer available, order P/N D140007 link, Includes: Ref. 42 and 43
42	D127172	BUSHING,44.75mm x 57.15mm OD x 28mm L	1-1/8" (28 mm) long
43	D135075	BUSHING,50.19mm ID x 70mm OD x 30mm L	1-3/16" (30 mm) long, special, with seals
43a	D140007	PITMAN	LINK bucket dump, with two bushings at forked end, Includes: Ref. 43B and 43C
43b	D127172	BUSHING,44.75mm x 57.15mm OD x 28mm L	1-1/8" (28 mm) long
43c	D138047	BUSHING,50.22mm ID x 60mm OD x 54mm L	2-1/8" (54 mm) long
44	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT
45	D123655	SEAL,50mm ID x 60.15mm OD x 4.06mm Thk	grease
46	D132493	PIN,50mm OD x 302mm L	11-7/8" long, cylinder rod end to links and, Serial Range: links-dipper
47	195-2153	WASHER,1 13/16" x 3 1/2" x .134"	flat, 1-3/4" bolt size, 1-13/16" ID x 3-1/2" OD x 1/8" thick
48	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin #175, Ext
49	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT
50	D135692	AXLE PIN	PIN dump link to bucket coupler
51	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	flat, 1-3/4" bolt size, 1-13/16" ID x 2-1/2" OD x 1/8" thick
52	D130037	HEADED PIN,8.73mm OD	PIN lock
53	D138418	BLOCK	SHIM, 1/16" (1.6 mm) thick, wear plate
54	D138417	BLOCK	SHIM, 1/32" (.8 mm) thick, wear plate
55	164-206	HEX SOC SCREW,Flat Hd, 5/16" - 18 x 3/4"	BOLT hex socket flat head, 5/16"-18 NC x 3/4", plated, grade 8
56	D139861	BLOCK	SHIM, 1/32" (.8 mm) thick, wear plate
57	D139862	BLOCK	SHIM, 1/16" (1.6 mm) thick, wear plate
58	D140260	WEAR PAD	PLATE wear, outer
59	164-206	HEX SOC SCREW,Flat Hd, 5/16" - 18 x 3/4"	BOLT hex socket flat head, 5/16"-18 NC x 3/4", plated, grade 8
60	D138419	SHIM,3.0mm Thk	(1/8"), Wear plate, top and bottom of extendahoe, may be used as a service replacement, used with P/N 164-207 bolt 3.0mm Thk
61	D140943	SHIM,3mm Thk	(1/8"), Wear plate, side of extendahoe, may be used as a service replacement, used with P/N 164-207 bolt 3mm Thk
62	164-207	HEX SOC SCREW,Flat Hd, 5/16" - 18 x 1"	BOLT hex socket flat head, 5/16"-18 NC x 1", plated, grade 8, used with Ref. 60 or 61 shim