| № | Номер | Название | Опции | Альт |
|---|
| 1 | 353389A4 | TANK, HYDRAULIC OIL | Right-Hand Side Of Chassis; Incl. Ref 1A, 1B, 12; If Used | | | 1 | 87408255 | TANK, HYDRAULIC OIL | Right-Hand Side of Chassis; Incl. Ref 1A, 1B, 12; If Used | | | 1a | 230857A1 | FILTER SCREEN | Strainer; Fill Tube | | | 1b | 440-1066 | SCREW,Cross Pan Hd, #6-32 x 3/8" | | | | 2 | 627-20060 | BOLT,Hex, M20 x 2.5 x 60mm, Cl 10.9, Full Thd | Use with Loctite 345-49 | | | 3 | 302358A1 | WASHER,21mm ID x 54mm OD x 4mm Th | Right-Hand | | | 3a | 896-11020 | WASHER,22mm ID x 37mm OD x 4mm Thk | Left-Hand | | | 4 | 185926A1 | SPACER,21mm x 40mm x 6.6mm Th | Right-Hand; Upper | | | 4a | 409473A1 | SPACER | Right-Hand; Lower | | | 5 | 217-436 | PLUG,Hex Soc, 3/8" - 18 NPTF | If Used | | | 6 | 231656A1 | COVER | Battery | | | 7 | 614-10020 | BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd | Use with 345-56 Loctite No. 767; Replaces 614-10025 25mm lg Bolt Used On Some Models | | | 8 | 495-21044 | WASHER,3/8" | | | | 12 | 86625138 | PLUG,7/18" - 14 | Drain; Includes Ref. 13 | | | 13 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | Boss Seal | | | 14 | 138595A1 | FILLER CAP,Male, Lockable | | | | 16 | 217-347 | FITTING,90 Degree Elbow, 3/8" Hose Barb x 9/16" - 18 Male ORB | Incl. Ref 17 | | | 18 | 214-1406 | HOSE CLAMP,#06, 0.44" - 0.78", Type F Worm | | | | 19 | 87363421 | HOSE, BULK,9.53mm ID x 912mm L | HOSE, METERS 912 mm (35-29/32 in); Vent; Replaces 393161A1 Hose | | | 20 | 143219A1 | HOSE PROTECTION,19mm ID x 24mm OD x 450mm L | | | | 21 | 217-380 | FITTING,3/8" Hose Barb x 3/8" Male NPTF | Use With 345-147 Sealant | | | 22 | 217-1102 | HYD CONNECTOR,3/8" - 18 NPT x 3/8" - 18 NPT | | | | 23 | 361776A1 | BREATHER,3/8"-18 | 3/5 PSI; Use With 345-147 Sealant; Replaces 120943A1, 6/12 PSI Breather | | | 24 | 122603A1 | SUPPORT | | | | 25 | 711-10030 | CARRIAGE BOLT,Sq Nk, M10 x 1.5 x 30mm, Cl 8.8 | | | | 26 | 399959A2 | COVER | Right-Hand Loader Lift Frame Tubing | | | 27 | 191047A1 | MOLDING | 315 mm (12-13/32 in) lg; Apply 75 mm (3 in) of Trim to Front Lower Edge and 575 mm (22-41/64 in) of Trim to Outside Lower Edge of Cover | | | 28 | 307577A1 | BOLT | M8 x 20 | | | 30 | 814-10045 | BOLT,Hex, M10 x 1.5 x 45mm, Cl 8.8 | | | | 31 | 892-11010 | LOCK WASHER,M10 | | | | 32 | D138055 | CLAMP | | | | 33 | 120303A1 | SPACER,11mm ID x 15.82mm OD x 15mm Thk | | | | 34 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 35 | 345-49 | SEALANT | Loctite, 1 ml | | | 36 | 226456A1 | LEVEL GAUGE | Aluminum; Incl. (2) Hollow Head Bolts and (4) 238-6114 O-Rings; Used with Ref 35 | | | 37 | D40442 | MOLDING | 305 mm (12 in); Cut From F42827 | | | 46 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 47 | 380807A3 | BOX, TOOL | No Longer Available; Order 380807A4, Ref 47A | | | 47a | 380807A4 | BOX, TOOL | Use With L60224 Ref 49A, Bumper | | | 48 | D80270 | ANTI-SKID STRIP,635mm / 25 Inch | Non-Slip, 635 mm (25 in) x 51 mm (2 in) | | | 49 | 356283A1 | GROMMET | For 5/16 in Hole; Used With 380807A3 Ref 47, Tool Box; If Used | | | 49a | L60224 | BUMPER | For 1/2 in Hole; Used With 380807A4 Ref 47A, Tool Box | | | 50 | 614-10025 | BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8 | If Used | | | 52 | 382202A2 | HINGE | | | | 53 | 614-10025 | BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8 | | | | 54 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 55 | 121856A1 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 10.9 | Pointed Self-Aligning With Washer; If Used | | | 29 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | | | | 51 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | | | | 17 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | Boss seal | |
|
|