| № | Номер | Название | Опции | Альт |
|---|
| 1 | G110597 | CYLINDER | bucket, see Figure 08-430 | |
| 1 | 235916A1R | REMAN-HYD CYLINDER | Reman New PN G110597 | |
| 1 | 235916A1C | CORE-HYD CYLINDER | Return Number | |
| 2 | D138022 | PIN,50mm OD x 240mm L | Bucket cylinder closed, Serial Range: end-dipper | |
| | Either use two of Ref. 3 or two of Ref. 4 with P/N D138022 pin. | | |
| 3 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1-13/16" ID x 3" OD x 1/8" thick | |
| | Either use two of Ref. 3 or two of Ref. 4 with P/N D138022 pin. | | |
| 4 | 495-81279 | WASHER,1.81" ID x 2.75" OD x 0.13" Thk | flat, 1-13/16" ID x 2-3/4" OD x 1/8" thick, plated | |
| | Either use two of Ref. 3 or two of Ref. 4 with P/N D138022 pin. | | |
| 5 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| D140368 | DIPPER ASSEMBLY backhoe, used in production, for service order P/N D127163 dipper in Figure 09-496, Includes: Ref. 6-15 | | |
| 6 | NSS | NOT SOLD SEPARAT | DIPPER backhoe | |
| 8 | D137217 | BUSHING,50.19mm ID x 70mm OD x 54mm L | 2" (50 mm) ID x 2-1/8" (54 mm) long, without slot for groove pin, dipper cylinder rod end pivot and bucket cylinder closed end pivot | |
| 9 | D135740 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 2-3/4" (70 mm) ID x 1-7/16" (36 mm) long, dipper to boom pivot | |
| 10 | D120450 | PLUG | plastic | |
| 11 | D141249 | BUSHING,50.19mm ID x 70mm OD x 25.5mm L | 2" (50 mm) ID x 1" (25 mm) long, bucket link pivot | |
| 12 | D127168 | BUSHING,44.6mm ID x 57.15mm OD x 94mm L | 1-3/4" (45 mm) ID x 3-11/16" (94 mm) long, bucket coupler pivot | |
| D139084 | CLIP, SPRING | COUPLER ASSEMBLY bucket, Includes: Ref. 13-15 | |
| 13 | NSS | NOT SOLD SEPARAT | COUPLER backhoe bucket | |
| 14 | D127167 | BUSHING,57.34mm ID x 70mm OD x 30mm L | 1-3/16" (30 mm) long, special, at dipper | |
| 15 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8" (28 mm) long, at bucket link | |
| 16 | D141468 | PITMAN | LINK bucket guide, with 1" long bushing, Includes: Ref. 17 | |
| 17 | D140029 | BUSHING,50.22mm ID x 60mm OD x 25.5mm L | 2" (50 mm) ID x 2-3/8" (60 mm) OD x 1" (25 mm) long | |
| 18 | D140007 | PITMAN | LINK bucket dump, with two bushings at forked end, Includes: Ref. 19 and 20 | |
| 19 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8" (28 mm) long | |
| 20 | D138047 | BUSHING,50.22mm ID x 60mm OD x 54mm L | 2-1/8" (54 mm) long | |
| 21 | D141142 | PIN,50mm OD x 306mm L | 12-3/64", (306 mm) long, Bucket cylinder rod end to links and, Serial Range: links-dipper | |
| 22 | D123655 | SEAL,50mm ID x 60.15mm OD x 4.06mm Thk | grease | |
| 23 | 495-81282 | WASHER,2 1/16" x 3" x .109" | flat, 2-1/16" ID x 3" OD x 1/8" thick | |
| 24 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 25 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | |
| 26 | D140653 | PIN,44.42mm OD x 152mm L | dump link to bucket coupler | |
| 27 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | flat, 1-3/4" bolt size, 1-13/16" ID x 2-1/2" OD x 1/8" thick | |
| 28 | 392181R1 | SPLIT PIN/SAFETY PIN,11.13mm OD | PIN lock, 1.63 ID | |
| | If an ID of 1.75 is required, use P/N D130037 | | |
