| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | TOWER swing, backhoe, with inner ears, see Figure 09-484 for swing tower and bushings | |
| 2 | D140093 | PIN | swing, Serial Range: tower-boom | |
| 3 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | |
| 4 | 113-709 | BOLT,Hex, 3/4" - 10 x 1-1/2", Gr 5 | | |
| 5 | T53681 | WASHER,19.84mm ID x 44.5mm OD x 5.559mm Thk | flat, 3/4", hardened | |
| 6 | D132045 | SPACER,20mm ID x 31.75mm OD x 12mm L | bolt | |
| 8 | R32119 | WASHER,71mm ID x 114mm OD x 1.6mm Thk | SHIM, 2-13/16" (71 mm) ID x 4-1/2" (114 mm) OD x 1/16" (2 mm) thick | |
| 9 | D127974 | SEAL,67.46mm ID x 80.18mm OD x 3.56mm Thk | grease | |
| 10 | REF | INSTRUCTION | CYLINDER boom, for correct assembly and components, see Figure 08-420 thru 08-424 | |
| 11 | D140096 | PIN,69.98mm OD x 160mm L | Boom Cylinder Closed End to Swing Tower | |
| 12 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | |
| 13 | D127974 | SEAL,67.46mm ID x 80.18mm OD x 3.56mm Thk | grease | |
| 14 | S10835 | CLEVIS PIN,14.33mm OD x 144.86mm L | PIN, CLEVIS, 9/16" x 5-1/2", hardened | |
| 15 | 195-541 | WASHER,5/8", SAE | flat, 5/8", plated | |
| 16 | 132-311 | COTTER PIN,5/32" x 1 1/4" | 5/32" x 1 1/4" | |
| 17 | D136518 | PIN | boom cylinder rod end to boom, if used | |
| 18 | 135-824 | GROOVED PIN,1/2" x 2 1/2", Type E, Hardened | PIN, GROOVED, , Center groove, if used 1/2" x 2 1/2", Type E, Hardened | |
| 19 | 113-700 | BOLT,Hex, 3/4" - 10 x 1", Gr 5 | if used Hex, 3/4"-10 x 1", G5 | |
| 20 | D133631 | WASHER | flat, hardened, special, if used | |
| 21 | D127159 | BOOM | backhoe, complete, Includes: Ref. 22 thru 27 | |
| 21a | D140367 | BOOM | backhoe, complete, used in production, for service order P/N D127159 boom, Includes: Ref. 22 thru 27 | |
| 22 | D136569 | BUSHING,70.19mm ID x 94mm OD x 38mm L | 2-3/4" (70 mm) ID x 1-5/16" (33 mm) long, boom to swing tower pivot | |
| 23 | D136565 | BUSHING,50.22mm ID x 70mm OD x 54mm L | 2" (50 mm) ID x 2-1/8" (54 mm) long, with slot for groove pin, right hand side of boom at dipper cylinder closed end pivot and boom cylinder rod end pivot | |
| 24 | D137217 | BUSHING,50.19mm ID x 70mm OD x 54mm L | 2" (50 mm) ID x 2-1/8" (54 mm) long, without slot for groove pin, left hand side of boom at dipper cylinder closed end pivot and boom cylinder rod end pivot, may be replaced with P/N D136565 bushing on some booms | |
| 25 | D135739 | BUSHING,70.19mm ID x 90mm OD x 44mm L | 2-3/4" (70 mm) ID x 1-3/4" (44 mm) long, with slot for groove pin, right hand side of boom at boom to dipper pivot | |
| 26 | D137218 | BUSHING,70.19mm ID x 90mm OD x 44mm L | 2-3/4" (70 mm) ID x 1-3/4" (44 mm) long, without slot for groove pin, left hand side of boom at boom to dipper pivot, may be replaced with P/N D135739 bushing on some booms | |
| 27 | D120450 | PLUG | plastic | |
| 28 | REF | INSTRUCTION | CYLINDER dipper, for correct assembly and components, see Figures 08-426 or 08-428 | |
| 29 | D132492 | PIN | dipper cylinder to boom and dipper, if used | |
| 30 | 135-824 | GROOVED PIN,1/2" x 2 1/2", Type E, Hardened | PIN, GROOVED, , Center groove, if used 1/2" x 2 1/2", Type E, Hardened | |
| 31 | 113-700 | BOLT,Hex, 3/4" - 10 x 1", Gr 5 | if used Hex, 3/4"-10 x 1", G5 | |
| 32 | D133631 | WASHER | flat, hardened, special, if used | |
| 33 | D132494 | PIN,70mm OD x 331mm L | , Serial Range: Boom-dipper | |
| 34 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | |
| 35 | 135-823 | GROOVED PIN,1/2" x 3 1/4", Type E, Hardened | PIN GROOVED, , Center groove 1/2" x 3 1/4", Type E, Hardened | |
| 36 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD), (2-27/32" ID x 3-1/2" OD x 1/16" thk), Boom to dipper 1.57mm Thk | |
| 37 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD) (2-27/32" ID x 3-1/2" OD x 1/8" thk), Boom to dipper 3.05mm Thk | |
| 38 | D133632 | WASHER,45mm ID x 100mm OD x 8mm Thk | flat, hardened, special | |
| 39 | D120610 | NUT | hex, 1-3/4"-12 NF, special flanged | |
| 40 | D138022 | PIN,50mm OD x 240mm L | Dipper cylinder to boom and dipper, if used | |
| | Either use two of Ref. 41 or two of Ref. 42 for P/N D138022 pin. | | |
| 41 | 495-81279 | WASHER,1.81" ID x 2.75" OD x 0.13" Thk | flat, 1-13/16" ID x 2-3/4" OD x 1/8" thick, plated, if used | |
| | Either use two of Ref. 41 or two of Ref. 42 for P/N D138022 pin. | | |
| 42 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1-13/16" ID x 3" OD x 1/8" thick, if used | |
| | Either use two of Ref. 41 or two of Ref. 42 for P/N D138022 pin. | | |
| 43 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin, if used #175, Ext | |
| 44 | D138023 | PIN,50mm OD x 290mm L | boom cylinder rod end to boom, if used | |
