(440) - BACKHOE EXTENDABLE DIPPER, 480D MODELS ONLY

№	Номер	Название	Опции
	D55721	EXTENSION	DIPPER ASSEMBLY - extension, Includes: Ref. 1 - 4
1	NSS	NOT SOLD SEPARAT	DIPPER - extendable
2	D55687	STRIP	WEAR STRIP - dipper slide
3	D37443	BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L	- dipper, at bucket link
4	D95213	BUSHING	- dipper, at bucket
	D102022	KIT - extendable dipper lubrication, service with components, Includes: Ref. 5 and 6
5	219-89	LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF	GREASE FITTING - 45º, 1/8" pipe, self-tapping, used with Ref. 6 to lubricate dipper slide, replaces 90 degree grease fitting used on some models
6	D134699	NOZZLE CAP	NOZZLE - extension, grease fitting, used with Ref. 5 to lubricate dipper slide, also order 9-72236 instruction sheet
7	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT
8	D25279	SNAP RING,M35, Int	- pin retaining
9	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
10	D53812	PIVOT PIN,1.5" OD x 10.14" L	PIN - dipper cylinder to extendable dipper
11	113-207	BOLT,Hex, 3/8" - 16 x 1", Gr 5
12	D99055	COVER	- end, dipper
13	95-6	WASHER,3/8"	- flat, 3/8"
	D99052	HOUSING	- extendable dipper, Includes: Ref. 14 - 17
14	D30741	BUSHING,38.33mm ID x 47.63mm OD x 50.8mm L	- right-hand ear, dipper cylinder mounting, 2" (51 mm) long
15	D31141	BUSHING,38.33mm ID x 47.63mm OD x 41.15mm L	- left-hand ear, dipper cylinder mounting, 1-5/8" (41 mm) long
16	D30756	BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L	-, Serial Range: boom-dipper
17	NSS	NOT SOLD SEPARAT	SLIDE - extendable dipper
18	D45034	PIN	-, Serial Range: boom-dipper
19	195-2155	WASHER,2 1/16" x 3" x .109"	- flat, 2", special, boom to dipper
20	D26919	SNAP RING,#200, Ext	Ring, Snap, , pin #200, Ext
21	D25279	SNAP RING,M35, Int	- pin retaining
22	D44882	PIN,38.1mm OD x 203.2mm L	- extension, Serial Range: cylinder-slide
23	G101203	CYLINDER	- dipper extension, see Figure 384
24	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin #175, Ext
25	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	- flat, 1-3/4", special
26	D53818	PIN,44.45mm OD x 278.89mm L	- extension cylinder to dipper and bucket links
27	26-820	BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 8
28	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
29	D75425	STOP	- dipper extension
30	113-417	BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd
31	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
32	D54095	BLOCK	- guide
	D99054	SPARE PART	EXTENSION ASSEMBLY - dipper, Includes: Ref. 33 and 34
33	NSS	NOT SOLD SEPARAT	EXTENSION - dipper
34	D52521	BUSHING,44.68mm ID x 57.15mm OD x 26.92mm L	- bucket link pin
35	D25279	SNAP RING,M35, Int	- pin retaining
36	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
37	D53576	PIN	- bucket, Serial Range: cylinder-dipper
38	G103503	CYLINDER BLOCK	CYLINDER - bucket, see Fig. 380
39	D99175	LINK ASSY.	LINK - guide, dipper and extension to dump links, right-hand
40	D99758	LINK ASSY.	LINK - guide, dipper and extension to dump links, left-hand, Includes: Ref. 41 and 42
41	D46405	BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L	- link, dipper end
42	D32919	BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L	- link, bucket cylinder end
43	D25279	SNAP RING,M35, Int	- pin retaining
44	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- special
45	D26002	PIN,38.1mm OD x 187.32mm L	- bucket cylinder to bucket linkage
46	D99731	LINK	- dump, Includes: Ref. 47
47	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	- link
48	D25279	SNAP RING,M35, Int	- pin retaining
49	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- special
50	D37614	PIN,38mm Od x 246mm L	-, Serial Range: link-bucket
51	D44887	SPACER	- link
52	74163	SPACER	WASHER - spacer
53	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin #175, Ext
54	195-2156	WASHER,1 13/16" x 2 3/4" x .109"	- flat, 1-3/4" ID, special
55	D123081	PIN,44.45mm OD x 370.84mm L	- dipper arm to bucket, used with all buckets except 12" (305 mm) buckets
55	D40244	PIN,44.45mm OD x 327.02mm L	- dipper arm to bucket, used with 12" (305 mm) buckets only