| № | Номер | Название | Опции | Альт |
|---|
| 1 | D133597 | HOUSING | TOWER ASSEMBLY backhoe swing, with inner ears, see Figure 09-488 for boom attaching parts, Includes: Ref. 2 thru 10 | | | 1a | D141067 | FRAME | TOWER ASSEMBLY backhoe swing, with inner ears, used in production, for service order P/N D133597 swing tower, Includes: Ref. 2 thru 10 | | | 2 | D135740 | BUSHING,70.19mm ID x 94mm OD x 40mm L | boom cylinder pivot | | | 3 | D135742 | BUSHING,70.19mm ID x 94mm OD x 24mm L | inner, boom pivot | | | 4 | D135741 | BUSHING,70.19mm ID x 90mm OD x 24mm L | outer, boom pivot | | | 5 | D135557 | BUSHING,70.5mm ID x 86mm OD x 30mm L | upper, swing tower pivot | | | 6 | D135559 | BUSHING,70.19mm ID x 86mm OD x 28mm L | tower pivot | | | 7 | D135558 | BUSHING,70.19mm ID x 86mm OD x 34mm L | with slots for groove pin, tower pivot, P/N D133597 swing tower | | | 7a | D138042 | BUSHING | Without slots for groove pin, tower pivot, P/N D141067 swing tower | | | 8 | D135559 | BUSHING,70.19mm ID x 86mm OD x 28mm L | lower, tower pivot | | | 9 | D136570 | BUSHING,40.19mm ID x 55mm OD x 30mm L | upper, swing cylinder pivot | | | 10 | D136571 | BUSHING,40.19mm ID x 55mm OD x 38mm L | lower, swing cylinder pivot | | | 11 | REF | INSTRUCTION | CYLINDER swing, for correct assembly and components, see Figure 08-416 or 08-418 | | | 12 | D129305 | PIN | swing cylinder mounting, closed end, used with grease fitting, no longer used, order P/N D139267 pin, Ref. 13A | | | 13 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT, if used | | | 13a | D139267 | PIN | swing cylinder mounting, closed end, Replaces: Ref. 12 pin and Ref. 13 grease fitting on some models | | | 14 | 113-424 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | | | 15 | 195-533 | WASHER,1/2", SAE | flat, 1/2", plated | | | 16 | D23740 | BUSHING | bolt | | | 17 | D137419 | BAR | RETAINER pin, no longer used, order P/N D132514 retainer | | | 17a | D132514 | PLATE | RETAINER pin | | | 18 | D132517 | PIN,40mm OD x 155mm L | swing cylinder rod end to swing tower | | | 19 | 113-221 | BOLT,Hex, 3/8" - 16 x 7/8", Gr 5 | | | | 20 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 21 | R29595 | WASHER | flat, special | | | 22 | 195-2122 | WASHER,1 5/16" x 1 3/4" x .065" | flat, 1-1/4" bolt size, 1-5/16" ID x 1-3/4" OD x 1/16" thick | | | 23 | D26918 | SNAP RING,#125, Ext | Ring, Snap, , pin #125, Ext | | | 24 | D136699 | WASHER | bearing, special, swing tower | | | 25 | D136649 | PIN | lower, swing tower to frame, grease fitting mounts in bottom of pin, no longer used, order P/N D140095 pin | | | 25a | D140095 | PIN | lower, swing tower to frame, grease fitting mounts in top of pin, used with Ref. 26 groove pin, if used | | | 26 | 135-823 | GROOVED PIN,1/2" x 3 1/4", Type E, Hardened | PIN GROOVED, , Center groove, if used 1/2" x 3 1/4", Type E, Hardened | | | 26a | D138038 | PIN | lower, swing tower to frame, grease fitting mounts in top of pin, without groove pin, if used | | | 27 | 933568R1 | SNAP RING,M70, Ext | RING snap, pin retaining, upper | | | 28 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD) (2-27/32" ID x 3-1/2" OD x 1/8" thk), Upper 3.05mm Thk | | | 29 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | 2-5/8" (67 mm) ID x 3-17/64" (83 mm) OD x 1/16" (2 mm) thick, lower | | | 29a | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD), (2-27/32" ID x 3-1/2" OD x 1/16" thk) 1.57mm Thk | | | 30 | 800-10065 | SNAP RING,65mm ID | RING snap, pin retaining, lower | | | 31 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | | | 32 | D137899 | PIN | swing stop, includes snap ring, no longer available, for service order P/N D141720 pin, Ref. 41, Includes: Ref. 32A | | | 32a | 800-50040 | SNAP RING,M40, Ext | RING snap, swing stop pin | | | 33 | D140091 | PIN | swing tower to frame, upper, used without spacer Ref. 40, no longer used, order P/N D140657 pin and P/N D139603 spacer, Ref. 33A and 40 | | | 33a | D140657 | PIN | swing tower to frame, upper, replaces pin used without spacer | | | 34 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8" NPT | | | 35 | 800-10065 | SNAP RING,65mm ID | RING snap, pin retaining | | | 36 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | 2-5/8" (67 mm) ID x 3-17/64" (83 mm) OD x 1/16" (2 mm) thick | | | 37 | 26-888 | BOLT,Hex, 1/2" - 13 x 5-1/2", Gr 8 | hex head, 1/2"-13 NC x 5-1/2", grade 8 | | | 38 | 195-533 | WASHER,1/2", SAE | flat, 1/2", plated, used as a spacer | | | 39 | 131-70 | NUT,1/2"-13, GB | NUT hex, self-locking, 1/2"-13 NC, plated | | | 40 | D139603 | SPACER | pin mounting | | | 41 | D141720 | PIN | swing stop, without snap ring | |
|
|