(436) - BACKHOE DIPPER AND BUCKET, 480D MODELS ONLY

№	Номер	Название	Опции
1	D99037	PIN	- dipper, Serial Range: cylinder-boom
2	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
3	D25279	SNAP RING,M35, Int	- pin retaining
4	G104844	CYLINDER	- dipper, parts list Figure 378
5	D44881	PIN,38.1mm OD x 136.4mm L	- dipper, Serial Range: cylinder-dipper
6	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
7	D25279	SNAP RING,M35, Int	- pin retaining
8	D37609	PIN	-, Serial Range: boom-dipper
9	L47721	WASHER	SHIM - spacer
10	195-2155	WASHER,2 1/16" x 3" x .109"	- flat, 2", special
11	D26919	SNAP RING,#200, Ext	Ring, Snap, , pin #200, Ext
12	D84175	BOOM	DIPPER - backhoe, Includes: Ref. 13 - 17
13	D34340	BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L	- bucket at dipper
14	D32890	BUSHING	- bucket linkage at dipper
15	D31140	BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L	- dipper at bucket cylinder
16	D38943	BUSHING,51.02mm ID x 63.5mm OD x 28.6mm L	- dipper at boom
17	D32865	BUSHING,38.33mm ID x 47.63mm OD x 22.35mm L	- dipper at dipper cylinder
18	D44882	PIN,38.1mm OD x 203.2mm L	- dipper to bucket cylinder
19	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
20	D25279	SNAP RING,M35, Int	- pin retaining
21	G103503	CYLINDER BLOCK	CYLINDER - bucket, parts list Figure 380
22	D26002	PIN,38.1mm OD x 187.32mm L	- bucket cylinder to bucket linkage
23	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
24	D25279	SNAP RING,M35, Int	- pin retaining
25	D84167	LINK	- guide, left-hand
26	D84166	LINK	- guide, right-hand, Includes: Ref. 27 and 28
27	D32919	BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L	- link, 1 each to D84167 and D84166
28	D32789	BUSHING,31.98mm ID x 41.27mm OD x 19.05mm L	- link, 1 each to D84167 and D84166
29	D99731	LINK	- bucket, Includes: Ref. 30
30	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	- bucket link, two each
31	D37614	PIN,38mm Od x 246mm L	-, Serial Range: link-bucket
32	D54218	PIN,38.1mm OD x 345.95mm L	- link to frost point, 13-5/8" long, if used
33	D44887	SPACER	- link
34	74163	SPACER	- link
35	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- spacer
36	D25279	SNAP RING,M35, Int	- pin retaining
37	D44883	PIN,31.75mm OD x 238.25mm L	-, Serial Range: link-dipper
38	195-2125	WASHER,1 5/16" x 2" x .109"	- flat, 2" (51 mm) OD x 1/8" (3.2 mm) thick
39	D26918	SNAP RING,#125, Ext	Ring, Snap, , pin #125, Ext
40	D64799	PIN,44.45mm OD x 370.84mm L	- dipper to bucket, uses grease fitting (Ref. 51), for service order pin (Refs. 40A or 40B) and grease fitting (Ref. 43)
40a	D123081	PIN,44.45mm OD x 370.84mm L	- dipper to bucket, used on all buckets except 12 inch (305 mm) bucket, requires grease fitting (Ref. 43) in dipper, if used
40b	D40244	PIN,44.45mm OD x 327.02mm L	- dipper to bucket, used on 12 inch (305 mm) buckets only, requires a grease fitting (Ref. 43) in dipper, if used
41	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	- flat, 1-3/4", special
42	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin #175, Ext
43	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT, used with Refs. 40A and 40B pins only
44	REF	INSTRUCTION	BUCKET - backhoe, see Figures 444 - 448 for options
	D54136	SUPPORT ASSY.	FROST POINT ASSEMBLY - backhoe, Includes: Ref. 45 - 48
45	NSS	NOT SOLD SEPARAT	BODY - frost point
46	D83306	POINT	- tooth
47	D43417	PIN	- tooth point
48	D37495	BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L	- frost point pivot
49	195-63	WASHER,1 5/8" x 3 1/4" x .180"	- flat, 1-9/16" ID, special, used with frost point
50	D25279	SNAP RING,M35, Int	- Ref. 32 pin retaining, used with frost point
51	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT, used with Ref. 40 pin only