| № | Номер | Название | Опции | Альт |
|---|
| 1 | D67791 | BRACKET | TOWER - swing, see Figure 458 for swing cylinder and frame attaching parts and hose guards, Includes: Ref. 2 | |
| 2 | D49429 | BUSHING | - at boom cylinder, closed end | |
| 3 | 13-812 | BOLT,Hex, 1/2" - 13 x 3/4", Gr 5 | - hex, 1/2" - 13 NC x 3/4" | |
| 4 | 92-8 | LOCK WASHER,1/2" | | |
| 5 | D50149 | BLOCK | - pin locking | |
| | D50149 block - The block welded to swing tower which this part mates to is part nbr D50147. | | |
| 6 | | RESERVED | | |
| 7 | D50700 | PIN | - boom to swing tower | |
| | D50700 pin - For pin which goes all the way through order D91240 (held in by snap ring at each end) - refer to 580D or 580E parts book. | | |
| 8 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8" NPT | |
| 9 | D69988 | BOOM | - backhoe, Includes: Ref. 9A - 12 | |
| 9a | D50004 | BLOCK | - tapped, Serial Range: welded-boom | |
| 10 | D50698 | BUSHING,51.03mm ID x 69.98mm OD x 40.64mm L | - boom pivot | |
| 11 | D95362 | BUSHING | - boom cylinder anchor | |
| 12 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - dipper pivot | |
| 12a | 72990 | WASHER | - flat, .06" (1.52 mm) thick | |
| 13 | D37416 | BUSHING | SPACER - bushing | |
| 13a | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Spacer, between swing tower and boom .035" Thk | |
| 14 | D55996 | SHAFT | - pivot, boom lock | |
| 15 | D56051 | SNAP RING,#137. Ext | Ring, Snap, #137, Ext, pin | |
| 15a | 195-2140 | WASHER,1 7/16" x 2" x .065" | - flat | |
| 15b | D75674 | LEVER | AND LATCH - transport lock | |
| 15c | D63988 | SPRING | - transport latch | |
| 15d | D75300 | KNOB | GRIP - handle, plastic, if used | |
| 16 | D49866 | PIN,38.1mm OD x 96.52mm L | - boom, Serial Range: cylinder-tower | |
| 16a | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8" NPT | |
| 17 | 13-656 | BOLT,Hex, 3/8" - 16 x 3-1/2", Gr 5 | - hex, 3/8" - 16 NC x 3-1/2" | |
| 18 | 131-352 | LOCK NUT,3/8"-16, GA | NUT - hex, lock, 3/8" - 16 NC | |
| 19 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special, if used | |
| 20 | REF | INSTRUCTION | CYLINDER - hydraulic, boom, see Figure 400 or 402 | |
| 21 | REF | INSTRUCTION | CYLINDER - hydraulic, dipper, see Figure 404 or 406 | |
| 22 | 13-864 | BOLT,Hex, 1/2" - 13 x 4", Gr 5 | | |
| 23 | D49865 | PIN,50.8mm OD x 304.8mm L | - boom, Serial Range: cylinder-boom | |
| 24 | 131-354 | LOCK NUT,1/2"-13, GA | NUT - hex, lock, 1/2" - 13 NC | |
| 25 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat | |
| 26 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8" NPT | |
| 26 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, , If used, Not shown 90º, 1/8" NPT x .84" lg | |
| 26 | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | FITTING - grease, 45º, 1/8" NPT, if used, not shown | |
| 27 | | RESERVED | | |
| 28 | D72359 | PIN,44.45mm OD x 142.24mm L | - dipper, Serial Range: cylinder-boom | |
| 29 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 30 | D52522 | PIN,44.45mm OD x 211.84mm L | - dipper, Serial Range: cylinder-dipper | |
| 31 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 32 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, .105" (2.67 mm) thick | |
| 32a | 86977693 | NUT,Serrated, #8 - 32, Gr 5 | - flat, .0625" (1.59 mm) thick | |
| 33 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 34 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, .105" (2.67 mm) thick | |
| 34a | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Pin (0.89 mm) .035" Thk | |
| 35 | D45523 | PIN,50.8mm OD x 276.35mm L | -, Serial Range: boom-dipper | |
| 36 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 37 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 38 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat | |
| 39 | D52522 | PIN,44.45mm OD x 211.84mm L | - dipper to bucket cylinder | |
| 40 | D77895 | BOOM | DIPPER ARM - backhoe, Includes: Refs. 41 - 45 | |
| 41 | D52434 | BUSHING | - dipper, at dipper cylinder | |
| 42 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - dipper, at boom | |
| 43 | D34340 | BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L | - dipper, at bucket cylinder | |
| 44 | D50146 | BUSHING,44.68mm ID x 57.15mm OD x 38.1mm L | - dipper, at bucket links | |
| 45 | D55626 | BUSHING,44.68mm ID x 57.15mm OD x 41.91mm L | - dipper, at bucket | |
| 46 | REF | INSTRUCTION | CYLINDER - hydraulic, bucket, see Figure 408 or 410 for proper cylinder | |
| 47 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 48 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, .105" (2.67 mm) thick | |
| 49 | D53818 | PIN,44.45mm OD x 278.89mm L | - bucket linkage to dipper arm | |
| 50 | D77725 | WASHER | - special, .375" (9.53 mm) thick | |
| 50a | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | - flat, .0625" (1.59 mm) thick | |
| 51 | D61088 | LINK | - bucket cylinder to dipper arm, LH | |
| 52 | D61087 | LINK | - bucket cylinder to dipper arm, RH, Includes: Ref. 53 and 54 | |
| 53 | D46405 | BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L | - link, at dipper arm | |
| 54 | D42788 | BUSHING,44.68mm ID x 53.98mm OD x 28.57mm L | - link, at bucket | |
| 55 | D61244 | LINK | - bucket cylinder to bucket, Includes: Ref. 56 and 57 | |
| 56 | D37495 | BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L | - link, at bucket cylinder | |
| 57 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket | |
| 58 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat | |
| 59 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 60 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special | |
| 61 | D30899 | PIVOT PIN,38.1mm OD x 338.14mm L | PIN - link to bucket, used on shovel and ditching buckets only | |
| 61 | D37614 | PIN,38mm Od x 246mm L | - link to bucket, used on all buckets except shovel and ditching buckets | |
| 62 | D54218 | PIN,38.1mm OD x 345.95mm L | - link to frost point | |
| 63 | 195-63 | WASHER,1 5/8" x 3 1/4" x .180" | - plain | |
| 64 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 65 | D37450 | SPACER,40.89mm ID x 48.26mm OD x 63.5mm L | SPACER - link | |
| 66 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8" NPT | |
| 67 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | |
| 68 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat | |
| 69 | D64799 | PIN,44.45mm OD x 370.84mm L | - dipper arm to bucket, all buckets except 12" (305 mm) buckets | |
| 70 | D55584 | PIN,44.45mm OD x 327.15mm L | - dipper arm to bucket, lubricated, 12" (305 mm) buckets only | |
| 71 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8" NPT | |
| 72 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 73 | REF | INSTRUCTION | BUCKET - backhoe, see Figures 472 - 478 for options | |
| 74 | D54136 | SUPPORT ASSY. | BODY - frost tooth, Includes: Ref. 75 | |
| 75 | D37495 | BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L | - frost tooth pivot | |
| D54136 | SUPPORT ASSY. | POINT ASSEMBLY - front tooth, Includes: Ref. 76 and 77 | |
| 76 | D83306 | POINT | - tooth, replaces D43416 point | |
| 77 | D43417 | PIN | - point | |
| 78 | D55082 | LOCK PIN,38.1mm OD x 208.53mm L | PIN - lock, boom transport | |
| 79 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - flat, .105" (2.67 mm) thick | |
| 80 | D31312 | WASHER | - flat, .062" (1.57 mm) thick | |
| 81 | D25279 | SNAP RING,M35, Int | RING - retaining, pin | |
| 82 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4" | |
| 83 | D62468 | GUARD | - boom cylinder, if used | |
| 84 | D62467 | BRACKET | - guard mounting, if used | |
| 85 | 13-548 | CAP,Hex, 5/16" - 18 x 3", Gr 5 | BOLT - hex, 5/16" - 18 NC x 3" | |
| 86 | 131-4 | LOCK NUT,5/16"-18, GB | NUT - hex, lock, 5/16" - 18 NC | |
| 87 | D45559 | BRACKET | - tube clamp, Serial Range: welded-boom | |
| | Used with Extendable Dipper | | |
| 88 | D52569 | BLOCK | - tapped, Serial Range: welded-boom | |
| | Used with Extendable Dipper | | |
| 89 | D52843 | BLOCK | - tapped, Serial Range: welded-boom | |
| | Used with Extendable Dipper | | |
