(9-046) - EXTENDABLE DIPPER

№	Номер	Название	Опции
1	REF	INSTRUCTION	BOOM - backhoe, see Figure 9-036 for boom and bushings
2	D132494	PIN,70mm OD x 331mm L	, Serial Range: Boom-dipper
3	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight, 1/8 PT x 21/32 inch
4	435-51652	GROOVED PIN,1/2" x 3 1/4", Type E, Hardened	Pin, Grooved, , center groove 1/2" x 3 1/4", Type E, Hardened
5	D136391	SHIM,72mm ID x 89mm OD x 1.57mm Thk	(M72 ID x 89 OD), Boom to dipper 1.57mm Thk
6	D136392	SHIM,72mm ID x 89mm OD x 3.05mm Thk	(M72 ID x 89 OD) 3.05mm Thk
7	D133632	WASHER,45mm ID x 100mm OD x 8mm Thk	- flat, hardened, special
8	181042A1	FLANGE NUT	- hex flange, special, 1-3/4 inch NF
9	REF	INSTRUCTION	CYLINDER ASSEMBLY - 5 (127) ID x 23 inch (583 mm) stroke, dipper, for correct assembly and components, see Figure 8-162 or 8-164
10	REF	INSTRUCTION	CYLINDER ASSEMBLY - 80 (3-1/2) ID x 872 mm (34-5/16 inch) stroke, bucket, parts list Figure 8-166 or 8-168
11	D141666	PIN,50mm OD x 199mm L	- dipper and bucket, Serial Range: cylinder-dippers
12	495-81227	WASHER,52.38mm ID x 74.63mm OD x 1.7mm Thk	- flat, 2-1/16 x 2-15/16 x 1/16 inch
13	495-81226	WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk	- flat, 1-13/16 x 2-1/2 x 1/8 inch
14	103-16175	SNAP RING,#175, Ext	Ring, Snap, , Pin #175, Ext
	D149018	DIPPER	ASSEMBLY - extension, inner, without grease seals at dipper pivot, uses wear plates (Ref. 43-45) with two mounting holes, no longer available, order Ref. 51-56, Includes: Ref. 15 - 17
15	NSS	NOT SOLD SEPARAT	DIPPER - inner
16	D149079	BUSHING,50.19mm ID x 60mm OD x 34mm L	- 50 x 34 mm long, dipper cylinder rod end pivot
17	D150121	BUSHING,70.19mm ID x 94mm OD x 40mm L	- 70 ID x 36 mm long, to dipper pivot
18	102649A1	BOOM	HOUSING - dipper, outer
19	307186A1	BUSHING,44.6mm ID x 57.15mm OD x 104mm L	- 45 ID x 194 mm long, bucket coupler pivot, old P/N D127168 is 94 mm long
		The new longer bushing won't let the bushing work out of the hole.
	134437A1	COUPLING	COUPLER ASSEMBLY - bucket, used with Ref 30 and 32 links, if used, see Figure 9-042, Ref. 37-44 for optional coupler and bucket links, Includes: Ref. 20 - 22
20	NSS	NOT SOLD SEPARAT	COUPLER - backhoe bucket
21	D127167	BUSHING,57.34mm ID x 70mm OD x 30mm L	- 30 mm long, special, at dipper
22	D127172	BUSHING,44.75mm x 57.15mm OD x 28mm L	- 28 mm long, at bucket link
24	D133865	PLUG	- plastic
25	1340969C2	HYDRAULIC CYLINDER,Double Acting, 44.4mm Rod, 1068mm Stroke	Assy, 76 (3) ID x 1068 mm (42 inch) stroke, Dipper extension, Parts list Figure 8-170
25	1340969C2R	REMAN-HYD CYLINDER	Dipper Extention Cylinder - For N.A. Only
25	1340969C2C	CORE-HYD CYLINDER	Dipper Extention Cylinder - For N.A. Only
26	175815A1	PIN	- dipper extension cylinder closed end, replaces D129892 pin
27	800-44040	SNAP RING,M40, Ext	RING - external retaining, No. 40, pin retaining
28	D140247	LOCK PIN,25.4mm OD x 232.6mm L	PIN, LOCK, Used at dipper extension cylinder closed end when transporting only, Used with item 29 lock pin
29	A33509	PIN,11.18mm OD	- lock, 7/16 inch diameter
30	D150608	PITMAN	LINK - 33 mm wide bushing, bucket guide, used with 134437A1 coupler, if used, Includes: Ref. 31, see Figure 9-042, Ref. 37-44 for optional coupler and bucket links
31	D150122	BUSHING	- 50 x 60 x 33 mm
32	D150080	PITMAN	LINK - bucket dump, with two bushings at forked end, used with 134437A1 coupler, if used, Includes: Ref. 33 and 34, see Figure 9-042, Ref. 37-44 for optional coupler and bucket links
33	D127172	BUSHING,44.75mm x 57.15mm OD x 28mm L	- 28 mm long
34	D138047	BUSHING,50.22mm ID x 60mm OD x 54mm L	- 54 mm (2-1/8 inch) long
35	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight, 1/8 PT x 21/32 inch
37	D141142	PIN,50mm OD x 306mm L	306 mm long, Bucket cylinder rod end to links and, Serial Range: links-dipper
38	495-81282	WASHER,2 1/16" x 3" x .109"	- flat, 2-1/16 x 3 x 3/32 inch
39	D141164	SPACER,46mm ID x 76mm OD x 2.5mm Thk	- 1-13/16 x 3 x 1/8 inch
40	103-16175	SNAP RING,#175, Ext	Ring, Snap, , Pin #175, Ext
41	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight, 1/8 PT x 21/32 inch
42	495-81226	WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk	- flat, 1-13/16 x 2-1/2 x 1/8 inch
43	D140886	SHIM,116mm OD x 1.6mm Thk	SHIM - 1.6 mm thick, wear plate, if used
44	D140885	BLOCK	SHIM - 0.8 mm thick, wear plate, if used
45	D141998	LARGE PLATE	PLATE - wear, plastic, outer, if used
46	409-7612	BOLT,3/8"-16 x 1.09" OAL	If used Hex Flg, 3/8"-16 x 3/4", Serr
47	D143167	WASHER	- special, if used
48	409-768	BOLT,Hex Flg, 3/8" - 16 x 1/2", Spcl	- hex serrated flange, 3/8 NC x 1/2 inch, replaces D143961 hex flange self-locking bolt
49	D146288	PIN,44.45mm OD x 167mm L	Dump Link to Bucket Coupler
50	103-16175	SNAP RING,#175, Ext	Ring, Snap, , If used #175, Ext
	244536A1	DIPPER	ASSEMBLY - extension, inner, uses wear plates (Ref 52-54) with one mounting hole, if used, Includes: Ref. 51
51	NSS	NOT SOLD SEPARAT	DIPPER - inner, includes bushings listed below
	D149079	BUSHING,50.19mm ID x 60mm OD x 34mm L	- 50 x 34 mm long, dipper cylinder rod end pivot, not shown, see Ref. 16 bushing for location
	D150121	BUSHING,70.19mm ID x 94mm OD x 40mm L	- 70 ID x 36 mm long, to dipper pivot, not shown, see Ref. 17 bushing for location
52	132716A1	BLOCK	PLATE - wear, outer
53	132844A1	SHIM,19mm ID x 142mm OD x 0.8mm Thk	- 0.8 mm thick, wear plate
54	132842A1	SHIM,19mm ID x 142mm OD x 1.6mm Thk	- 1.6 mm thick, wear plate
55	183443A1	PIN,6.6mm OD x 38.5mm L	Pine tree, long
56	183509A1	PIN,8.3mm OD x 22mm L	Pine tree, short
	495-81230	WASHER,2.31" ID x 3.5" OD x 0.13" Thk	S welded to the inside of Refs. 18 and 18A at the coupler end