(458) - MOUNTING FRAME AND STABILIZERS

№	Номер	Название	Опции
1	D67790		FRAME - backhoe mounting, used backhoe, also order Refs. 7 and 7A, Includes: Ref. 2 - 6A, Serial Range: -5411088
1	D84364		FRAME - backhoe mounting, used on backhoe, also order Refs. 7 and 7A, Includes: Ref. 2 - 6A, Start Serial: 5411088
2	D60159	BUSHING,60.55mm ID x 69.85mm OD x 38.1mm L	- swing cylinder pivot, lower
3	D31142	BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L	- frame, at swing tower, lower
4	D30756	BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L	- frame, at swing tower, lower
5	D43940	BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L	- stabilizer anchor
6	D61298	GUIDE	- hose
6a	41-1044	PLUG,Cup, 2 3/4"	- cup, 2-3/4"
7	D60803	BUSHING,44.42mm ID x 63.75mm OD	BEARING - inner, stabilizer anchor
		D60803 inner bearing - Race which this item fits into is part nbr D60846 and welded plates which contain this assembly are part nbrs D60849 (RH) and D60850 (LH).
7a	41-1032	PLUG,Cup, 2"	- core hole, 2"
8	D50294	STABILIZER	LEG ASSEMBLY - stabilizer, RH, Includes: Ref. 10 - 12
9	D50295	STABILIZER	LEG ASSEMBLY - stabilizer, LH, not shown, Includes: Ref. 10 - 12
10	D37495	BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L	- leg to frame, 1-1/4" (32 mm) long
		Ref. 10, 11 and 12 - Plate (w/ bushing) showing in illustration at top of stabilizer leg (where it matches up to mounting frame) is part nbr D54734 (large boss). The plate on other side of stabilizer leg is D54733 (small boss).
11	D54013	SPACER,50.7mm ID x 53.98mm OD x 140.72mm L	SPACER - bushing, if used
		Ref. 10, 11 and 12 - Plate (w/ bushing) showing in illustration at top of stabilizer leg (where it matches up to mounting frame) is part nbr D54734 (large boss). The plate on other side of stabilizer leg is D54733 (small boss).
12	D37443	BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L	- leg to frame, 2" (51 mm) long
		Ref. 10, 11 and 12 - Plate (w/ bushing) showing in illustration at top of stabilizer leg (where it matches up to mounting frame) is part nbr D54734 (large boss). The plate on other side of stabilizer leg is D54733 (small boss).
13	D67308	PIN,44.4mm OD x 344.17mm L	- stablizer, Serial Range: leg-frame
13a	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	- flat, 1-3/4"
14	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin #175, Ext
15	D29483	PIN,38.1mm OD x 146.05mm L	- stabilizer, Serial Range: cylinder-frame
16	D25279	SNAP RING,M35, Int	RING - pin retaining
17	D50337	BUSHING,38.91mm ID x 44.45mm OD x 14.22mm L	SPACER -, Serial Range: cylinder-frame
18	REF	INSTRUCTION	CYLINDER - hydraulic, LH stabilizer, not shown, see Figure 390 or 392 for correct cylinder
19	REF	INSTRUCTION	CYLINDER - hydraulic, RH stabilizer, see Figure 390 or 392 for correct cylinder
20	D50695	PIN,38.1mm OD x 195.33mm L	- stabilizer, Serial Range: cylinder-leg
21	D50696	PIN,38.1mm OD x 225.55mm L	- stabilizer, Serial Range: plate-leg
22	D25279	SNAP RING,M35, Int	RING - pin retaining
23	D64621	FOOT REST	PLATE - stabilizer, cleated, if used
24	D61376	STABILIZER	PLATE - stabilizer, street or cemetery pad, if used, uses D61638 pad
25	D61368	PAD	Rubber, D61376 stabilizer plate, if used
26	113-713	BOLT,Hex, 3/4" - 10 x 1-3/4", Gr 5
26a	129-108	NUT,3/4"-10, G5
27	D56335	PIN	- tractor to backhoe mounting frame
28	13-856	BOLT,Hex, 1/2" - 13 x 3-1/2", Gr 5
29	131-654	LOCK NUT,1/2"-13, GB	NUT - hex, lock, 1/2" - 13 NC
30	13-1640	BOLT,Hex, 1" - 8 x 2-1/2", Gr 5, Full Thd
31	D36505	WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk	- special, hardened
32	25-1016	NUT,1"-8, G5
33	D60169	CHANNEL	PLATE - retainer, swing cylinder, upper, Includes: Ref. 34
34	D60159	BUSHING,60.55mm ID x 69.85mm OD x 38.1mm L	- swing cylinder pivot, upper
35	219-55	LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF	NIPPLE, LUBE, , If used 90º, 1/8" NPT x .84" lg
36	REF	INSTRUCTION	CYLINDER - hydraulic, swing, see Figure 394-398 for correct cylinder
37	D49863	PIN,44.45mm OD x 248.92mm L	- swing, Serial Range: cylinder-tower
38	D49864	PLATE	- pin retaining
39	13-820	BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd
40	92-8	LOCK WASHER,1/2"
41	D67791	BRACKET	TOWER - swing, see Figure 462 for boom attaching parts, Includes: Ref. 42
42	D49429	BUSHING	- at boom cylinder, closed end
43	D49879	PIN	- swing locking
44	D33805	PIN	- retaining
45	D74004	PIN	- tower to frame, upper
46	D74004	PIN	- tower to frame, lower
47	D26919	SNAP RING,#200, Ext	Ring, Snap, , pin #200, Ext
48	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight, 1/8" NPT
49	195-2155	WASHER,2 1/16" x 3" x .109"	- flat, spacer, .015" (0.38 mm) thick
50	72990	WASHER	- flat, spacer, .0625" (1.59 mm) thick
51	D50132	SPACER,57.15mm ID x 114.3mm OD x 7.94mm L	WASHER - spacer, welded to swing tower and mounting frame
52	D54702	GUIDE	GUARD - hose retaining, if used
53	D56194	GUARD	- hose retaining, if used
54	D74007	LINK	- upper, backhoe attaching
55	D71870	PIN	-, Serial Range: link-tractor
56	13-860	BOLT,Hex, 1/2" - 13 x 3-3/4", Gr 5	If used Hex, 1/2"-13 x 3 3/4", G5
56	13-856	BOLT,Hex, 1/2" - 13 x 3-1/2", Gr 5	If used Hex, 1/2"-13 x 3 1/2", G5
57	131-654	LOCK NUT,1/2"-13, GB	NUT - hex, lock, 1/2" - 13 NC
58	D61065	ROD	- tension, used tractor, and order (1) D83226 rod and (2) 131-454 nuts, Serial Range: -8974781
58	D83226	ROD	- tension, used on tractor, Start Serial: 8974781
59	D64968	WASHER	- special, hardened
60	25-1020	NUT,1 1/4"-7, G5	Used tractor 1 1/4"-7, G5, Serial Range: -8974781
60	131-454	LOCK NUT,1 1/4"-7	NUT - hex, self lock, 1-1/4" - 7 NC, used on tractor, Start Serial: 8974781