| № | Номер | Название | Опции | Альт |
|---|
| 1 | L125246 | FRAME | - rear, includes fuel tank, Serial Range: -JAK0024165 | |
| 1a | L129971 | CHASSIS | FRAME - rear, includes fuel tank, not shown, Start Serial: JAK0024165 | |
| 2 | L125219 | ROD | LINK - transport/service | |
| 3 | A30338 | PIN | - klik | |
| 4 | L125221 | LOCK PIN,31.75mm OD x 144.75mm L | PIN - lock, transport/service link, front | |
| 5 | A164277 | PIN,31.75mm OD x 107.95mm L | - lock, transport/service link, rear | |
| 6 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| | Weldment part under Ref. 6, is p/n: L125108.. 1 pc per side. | | |
| 7 | 413-1024 | BOLT,Hex, 5/8" - 11 x 1-1/2", Gr 5 | | |
| 8 | D35009 | WASHER | - flat, 21/32 x 2-1/2 x 11/64 inch, hardened | |
| 9 | L125100 | SPACER,17.48mm ID x 31.75mm OD x 14.3mm Thk | - upper pin | |
| 10 | L125271 | PIVOT PIN,63.49mm OD x 198mm L | PIN - upper pivot | |
| 11 | L125008 | SEAL,63.5mm ID x 98.58mm OD x 11.89mm Thk | SEAL - upper, upper articulation plate | |
| 12 | L125225 | COLLAR | RETAINER - upper pivot | |
| 13 | 326-1056 | BOLT,Hex, 5/8" - 11 x 3-1/2", Gr 8 | BOLT, Hex, 5/8"-11 x 3 1/2", G8 | |
| 14 | NLS | NO LONGER SERVICED | - flat, 21/32 x 1-5/16 x 9/64 inch, hardened | |
| 15 | L125231 | SHIM,114mm ID x 195mm OD x 0.11mm Thk | - upper pivot, 0.1 mm thick | |
| 15 | L125232 | SHIM,114mm ID x 195mm OD x 0.28mm Thk | - upper pivot, 0.25 mm thick | |
| 15 | L125233 | SHIM,114mm ID x 195mm OD x 0.54mm Thk | - upper pivot, 0.5 mm thick | |
| 16 | L125006 | BEARING ASSY,63.5mm ID x 112.71mm OD x 60.33mm W | BEARING - upper pivot | |
| 17 | L125561 | SEAL,63.5mm ID x 98.58mm OD x 11.89mm Thk | - lower, upper articulation plate | |
| 18 | L125226 | PIVOT PIN,96mm OD x 197mm L | PIN - lower pivot | |
| 19 | L125009 | SEAL,92.08mm ID x 123.98mm OD x 15.88mm Thk | SEAL - lower, upper articulation plate | |
| 20 | L125227 | SPACER | - upper, lower pivot bearing | |
| 21 | L125007 | BEARING ASSY,76.2mm ID x 139.99mm OD x 73.03mm W | BEARING - lower pivot | |
| 22 | L125234 | SHIM,141mm ID x 215mm OD x 0.11mm Thk | - lower pivot, 0.1 mm thick | |
| 22 | L125235 | SHIM,141mm ID x 215mm OD x 0.28mm Thk | - lower pivot, 0.25 mm thick | |
| 22 | L125236 | SHIM,141mm ID x 215mm OD x 0.54mm Thk | - lower pivot, 0.5 mm thick | |
| 23 | L125228 | COLLAR | RETAINER - lower pivot | |
| 24 | 326-1072 | BOLT,Hex, 5/8" - 11 x 4-1/2", Gr 8 | | |
| 25 | D43266 | WASHER | - flat, 21/32 x 1-5/16 x 9/64 inch, hardened | |
| 26 | L125229 | SPACER,76.22mm ID x 92.16mm OD x 64.52mm L | - lower, lower pivot bearing | |
| 27 | L125562 | SEAL,92.08mm ID x 123.98mm OD x 15.88mm Thk | SEAL - lower, lower pivot | |
| 28 | L125237 | SHIM,100mm ID x 178mm OD x 0.11mm Thk | - lower plate, 0.1 mm thick | |
| 28 | L125238 | SHIM | - lower plate, 0.25 mm thick | |
| 28 | L125239 | SHIM,100mm ID x 178mm OD x 0.54mm Thk | - lower plate, 0.5 mm thick | |
| 28 | L125970 | SHIM,100mm ID x 178mm OD x 1.05mm Thk | - lower plate, 1 mm thick | |
| 29 | L125230 | LARGE PLATE | PLATE - lower pin | |
| 30 | 326-1028 | BOLT,Hex, 5/8" - 11 x 1-3/4", Gr 8 | | |
| 31 | 326-1056 | BOLT,Hex, 5/8" - 11 x 3-1/2", Gr 8 | BOLT, Hex, 5/8"-11 x 3 1/2", G8 | |
| 32 | NLS | NO LONGER SERVICED | - flat, 21/32 x 1-5/16 x 9/64 inch, hardened | |
| 33 | NSS | NOT SOLD SEPARAT | BRACKET - lift and tie down, welded to rear frame | |
| 34 | 353-417 | PLUG,Dome, 2.000" hole, Nylon | - nylon, 2 inch | |
| 35 | 353-408 | PLUG,Dome, .750" hole, Nylon | - nylon, 3/4 inch, models without clevis or pintle hitch assemblies | |
| 36 | 353-411 | PLUG,Dome, 1.000" hole, Nylon | Models without clevis or pintle hitch assemblies Dome, 1.000" hole, Nylon | |
| 37 | 353-405 | PLUG,Dome, .562" hole, Nylon | - nylon, 9/16 inch | |
| 38 | 353-404 | PLUG,Dome, .500" hole, Nylon | | |
