| № | Номер | Название | Опции | Альт |
|---|
| 1 | A151015 | CRANKSHAFT | (Replaces A37211 and A39146) | |
| 2 | A36495 | BEARING LINER,73.72mm ID x 78.54mm OD x 39.69mm W | LINER SET - main bearing, rear (Standard) (Set of 2) | |
| 2 | A36496 | LINING | LINER SET - main bearing, rear (-.002") (Set of 2) | |
| 2 | A36497 | BEARING LINER,73.44mm ID x 78.54mm OD x 39.69mm W | LINER SET - main bearing, rear (-.010") (Set of 2) | |
| 2 | A36498 | KIT | LINER SET - main bearing, rear (.-020") (Set of 2) | |
| 2 | A36499 | BEARING LINER | LINER SET - main bearing, rear (-.030") (Set of 2) | |
| 3 | A36485 | LINING | LINER SET - main bearing, intermediate (Standard) (Set of 2) | |
| 3 | A36486 | LINING | LINER SET - main bearing, intermediate (-.002") (Set of 2) | |
| 3 | A36487 | BEARING LINER,73.44mm ID x 78.54mm OD x 25.4mm W | LINER SET - main bearing, intermediate (-.010") (Set of 2) | |
| 3 | A36488 | CRANKSHAFT BEARING,3.067" ID x 3.092" OD x 1" | LINER SET - main bearing, intermediate (-.020") (Set of 2) | |
| 3 | A36489 | LINING | LINER SET - main bearing, intermediate (-.030") (Set of 2) | |
| 4 | A36490 | BEARING LINER,73.41mm ID x 96.84mm OD x 34.87mm W | LINER SET - main bearing, center (Standard) (Set of 2) | |
| 4 | A36491 | LINING | LINER SET - main bearing, center (-.002") (Set of 2) | |
| 4 | A36492 | BEARING LINER,73.66mm ID x 96.84mm OD x 34.87mm W | LINER SET - main bearing, center (-.010") (Set of 2) | |
| 4 | A36493 | BEARING LINER,73.66mm ID x 96.84mm OD x 34.87mm W | LINER SET - main bearing, center (-.020") (Set of 2) | |
| 4 | A36494 | LINING | LINER SET - main bearing, center (-.030") (Set of 2) | |
| 5 | A36480 | BEARING LINER,73.69mm ID x 78.54mm OD x 32.66mm W | LINER SET - main bearing, front (Standard) (Set of 2) | |
| 5 | A36481 | LINING | LINER SET - main bearing, front (-.002") (Set of 2) | |
| 5 | A36482 | BEARING LINER,73.44mm ID x 78.54mm OD x 32.66mm W | LINER SET - main bearing, front (-.010") (Set of 2) | |
| 5 | A36483 | LINING | LINER SET - main bearing, front (-.020") (Set of 2) | |
| 5 | A36484 | LINING | LINER SET - main bearing, front (-.030") (Set of 2) | |
| 8 | A39288 | GEAR | - crankshaft (1st used engine serial no. 2718083) (1-5/32" wide) (Do not use spacer with this gear) | |
| 9 | A29263 | GEAR | - crankshaft (Used prior to engine serial no. 2718083) (1-1/16" wide) (Must use spacer with this gear) | |
| 10 | A29294 | BUSHING | SPACER - thrust (3/32" wide) (Use with A29263 gear) | |
| 11 | A29259 | SLINGER | - oil | |
| 12 | A39110 | OIL SEAL,54mm ID x 76.33mm OD x 9.09mm Thk | - oil, front (2 x 3 x 1/2") (Replaces A36609) | |
| 13 | A50962 | PULLEY | - fan drive (Replaces A39931 and G11342) | |
| 14 | 126-216 | WOODRUFF KEY,Hi-Pro, 1" Dia x 1/4" x 1 1/16" | KEY - pulley and gear | |
| 15 | A35673 | NUT | - pulley retaining | |
| 18 | A38390 | RETAINER | - rear oil seal | |
| 19 | A39188 | GASKET | - retainer | |
| 20 | A51339 | OIL SEAL,101.6mm ID x 127.1mm OD x 9.5mm Thk | - oil, rear (4 x 5 x 1/2) (Replaces A36610, A39027 and A39111) | |
| | A49851 Wear Sleeve for the A51339 Rear Crank Seal | | |
| 21 | 26-412 | BOLT,Hex, 1/4" - 20 x 3/4", Gr 8 | - retainer (1/4 x 3/4 NC hex) | |
| 21 | 26-416 | BOLT,Hex, 1/4" - 20 x 1", Gr 8 | - retainer (1/4 x 1" NC hex) | |
| 22 | 92-4 | LOCK WASHER,1/4" | WASHER, LOCK, 1/4" | |
