| № | Номер | Название | Опции | Альт |
|---|
| 1 | 1542916C1 | CYLINDER ASSY. | CYLINDER ASSEMBLY, 5, 127, ID x 33-3/16 inch, 843 mm, stroke, boom, without grease seals at rod and tube eyes, see note, no longer available, order 1543391C1 cylinder on Figure 8-131C, Includes: Ref. 2 through 25 and P/N NSS above Ref. 6 | |
| 2 | 1542636C1 | TUBE,126.87 mm ID, 1069.3 mm Length | cylinder, order 132519A1 tube on Figure 8-131C, Includes: Ref. 3, 4 and 5 | |
| 3 | D144421 | BUSHING | tube | |
| 4 | 86625138 | PLUG,7/18" - 14 | Includes Ref. 5 Hex Soc, 7/8"-14 ORB | |
| 5 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | |
| NSS | NOT SOLD SEPARAT | GLAND ASSEMBLY cylinder, Includes: Ref. 6 through 14 | |
| 6 | 1542918C1 | CYLINDER END CAP | GLAND cylinder, has identification groove on outer lip | |
| 7 | D95145 | WIPER SEAL,54.79mm ID x 70.09mm OD x 7.91mm W | WIPER piston rod | |
| | Part of seal kit P/N 1542919C2. | | |
| 8 | G102426 | BUSHING,57.15mm ID x 60.22mm OD x 37.85mm L | - Center | |
| | Part of seal kit P/N 1542919C2. | | |
| 9 | 1542877C1 | SEAL KIT,57.2mm Rod | KIT seal, NSS, not shown, Includes: Ref. 10, 11 and 12 | |
| | Part of seal kit P/N 1542919C2. | | |
| 10 | 1542929C1 | SEAL,2.778mm OD | rod, NSS, order 1542919C2 kit below | |
| | Part of seal kit P/N 1542919C2. | | |
| 11 | 1542928C1 | SEAL,2.275" ID | buffer, NSS, order 1542919C2 kit below | |
| | Part of seal kit P/N 1542919C2. | | |
| 12 | 1543351C1 | O-RING | RING back up, NSS, no longer included in kit | |
| | Part of seal kit P/N 1542919C2. | | |
| 13 | 238-5247 | O-RING,0.139" Thk x 4.609" ID, -247, Cl 5, 75 Duro | Gland -247, 70 Duro, 4.609" ID x .139" Thk | |
| | Part of seal kit P/N 1542919C2. | | |
| 14 | G107970 | BACK-UP RING,120.27mm ID x 127.13mm OD x 1.4mm Thk | Gland O-Ring | |
| | Part of seal kit P/N 1542919C2. | | |
| 15 | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 " | |
| 16 | 1542638C1 | PISTON ROD | ROD piston, 2-1/4 inch, 57 mm, diameter, Includes: Ref. 17 | |
| 17 | D141555 | BUSHING,50.19mm ID x 60mm OD x 40mm L | Rod | |
| 18 | 1346018C1 | JACK PISTON | PISTON cylinder, used with 1958028C1 relief valve cartridge | |
| 19 | 1958028C1 | VALVE | ASSEMBLY relief, cartridge, internal component parts not serviced separately, Includes: Ref. 20 | |
| 21 | G110269 | SEAL,112.5mm ID x 126.88mm OD x 7.29mm Thk | piston | |
| | Part of seal kit P/N 1542919C2. | | |
| 22 | G102090 | RING,127mm OD, Ext | wear, piston | |
| | Part of seal kit P/N 1542919C2. | | |
| 23 | 28-2048 | BOLT,Hex, 1-1/4" - 12 x 3", Gr 8 | | |
| 24 | G104989 | WASHER,34.29mm ID x 60.3mm OD x 4.78mm Thk | flat, 1-1/4 inch, hardened | |
| 25 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | |
| 1542919C2 | SEAL KIT | KIT seal, Includes Ref. 7 through 14, 21, and 22, also includes G108712 piston rod wiper, and an instruction sheet | |
| 20 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk, Relief valve cartridge, external | |
