| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | SWING TOWER - backhoe, with inner ears, see Figure 9-034 for swing tower and bushings | |
| 2 | 121779A1 | PIN,70mm OD x 98mm L | - swing, Serial Range: tower-boom | |
| | Ref. Item 2 - If looking for a 2 piece pin and bracket the part nos are: pin is 250663a1 and the bracket is 303646a1 | | |
| 3 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | |
| 4 | 604-20040 | BOLT,Hex, M20 x 40mm, Cl 8.8 | - hex, self-locking, 20-2.5 x 40 mm, replaces 614-20040 used on some models | |
| 5 | 496-41081 | WASHER,13/16" x 1 3/4" x .219", HDN | - flat, 13/16 x 1-3/4 x 7/32 inch, hardened | |
| 6 | 122897A1 | SPACER,21mm ID x 31.75mm OD x 12mm L | - 21 x 32 x 12 mm | |
| 7 | H71514 | WASHER,72mm ID x 114mm OD x 3mm Thk | - special, boom to swing tower | |
| 8 | R32119 | WASHER,71mm ID x 114mm OD x 1.6mm Thk | SHIM - 71 (2-13/16) ID x 114 mm (4-1/2 inch) | |
| 9 | 144200A1 | CYLINDER ASSY. | CYLINDER ASSEMBLY - 127 (5) ID x 842 mm (33-5/32 inch) stroke, boom, parts list Figure 8-160 | |
| 10 | 122284A1 | BOOM | - backhoe, service replacement, Includes: Ref. 11 - 14 | |
| 11 | D151071 | BUSHING,70.19mm ID x 94mm OD x 38mm L | - 70 (2-3/4) ID x 34 mm (1-5/16 inch) long | |
| 12 | D135739 | BUSHING,70.19mm ID x 90mm OD x 44mm L | - 70 (2-3/4) ID x 44 mm (1-3/4 inch) long, with slot for groove pin, right-hand side of boom at boom to dipper pivot | |
| 13 | D137218 | BUSHING,70.19mm ID x 90mm OD x 44mm L | - 70 (2-3/4) ID x 44 mm (1-3/4 inch) long, without slot for groove pin, left-hand side of boom at boom to dipper pivot | |
| 14 | D120450 | PLUG | - plastic | |
| 15 | REF | INSTRUCTION | CYLINDER ASSEMBLY - 5 (127) ID x 23 inch (583 mm) stroke, dipper, for correct assembly and components, see Figure 8-162 or 8-164 | |
| 16 | D132494 | PIN,70mm OD x 331mm L | , Serial Range: Boom-dipper | |
| 17 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | |
| 18 | 435-51652 | GROOVED PIN,1/2" x 3 1/4", Type E, Hardened | Pin, Grooved, , center groove 1/2" x 3 1/4", Type E, Hardened | |
| 19 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD), Boom to dipper 1.57mm Thk | |
| 20 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD), Boom to dipper 3.05mm Thk | |
| 21 | D133632 | WASHER,45mm ID x 100mm OD x 8mm Thk | - flat, hardened, special | |
| 22 | 181042A1 | FLANGE NUT | - hex flange, special, 1-3/4 inch NF | |
| 23 | 123167A1 | PIN | - dipper cylinder to boom, without center lubrication groove, used with 126151A1 or 183795A1 dipper cylinder, if used | |
| 23a | 123167A2 | PIN,60mm OD x 240mm L | - dipper cylinder to boom, with center lubrication groove, used with 183795A2 dipper cylinder, if used | |
| 24 | H433285 | SPACER | SHIM - 57 x 76 x 1.5 mm | |
| 25 | 800-4155 | SNAP RING,55mm ID | RING - external retaining, No. 55, pin retaining | |
| 26 | 123168A1 | PIN | - boom cylinder closed, Serial Range: end-boom | |
| 27 | 190313A1 | PIN,60mm OD x 159.6mm L | Boom cylinder rod end to swing tower | |
| 28 | 103-11237 | SNAP RING,#237, Ext | Ring, Snap, , Pin #237, Ext | |
| 29 | 123318A1 | WASHER,62mm ID x 86mm OD x 1.7mm Thk | - special, 62 mm ID | |
| 30 | D138022 | PIN,50mm OD x 240mm L | - Dipper cylinder rod, Serial Range: end-dipper | |
| 31 | 495-81227 | WASHER,52.38mm ID x 74.63mm OD x 1.7mm Thk | - flat, 2-1/16 x 2-15/16 x 1/16 inch | |
| 32 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | |
| 33 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pin #175, Ext | |
