| № | Номер | Название | Опции | Альт |
|---|
| 1 | 249867A1 | CASING | TOWER ASSEMBLY - backhoe swing, replaces 111512A1 tower, Includes: Ref. 2 - 10 | |
| 2 | 191017A1 | BUSHING,60.2mm ID x 70mm OD x 36mm L | - boom cylinder pivot | |
| 3 | 121778A1 | BUSHING,70.19mm ID x 94mm OD x 30mm L | - inner, boom pivot | |
| 4 | D135741 | BUSHING,70.19mm ID x 90mm OD x 24mm L | - outer, boom pivot | |
| 5 | D135557 | BUSHING,70.5mm ID x 86mm OD x 30mm L | - upper, swing tower pivot | |
| 6 | D135559 | BUSHING,70.19mm ID x 86mm OD x 28mm L | - upper, tower pivot | |
| 7 | D151073 | BUSHING,70.19mm ID x 86mm OD x 34mm L | - tower pivot | |
| 8 | D151074 | BUSHING,70.19mm ID x 86mm OD x 28mm L | - 70 x 86 x 28 mm long, lower | |
| 9 | 135249A1 | BUSHING,50.96mm ID x 63.5mm OD x 28.6mm L | - upper, swing cylinder pivot | |
| 10 | 135248A1 | BUSHING,50.94mm ID x 63.5mm OD x 38.1mm L | - lower, swing cylinder pivot | |
| 11 | REF | INSTRUCTION | CYLINDER ASSEMBLY - 102 (4) ID X 292 mm (11-1/2 inch) stroke, swing, parts list Figure 8-156 or 8-158 | |
| 12 | 198976A1 | PLATE | Bracket, Swing cylinder to frame, Replaces 119501A1 bracket, Incl Ref 12A | |
| 12a | 114318A1 | BUSHING,80.19mm ID x 90mm OD x 29.35mm L | - 80 mm ID, cylinder pivot | |
| 13 | 827-20075 | BOLT,Hex, M20 x 2.5 x 75mm, Cl 10.9, Full Thd | - hex, 20 - 2.5 x 75 mm, class 10.9 | |
| 14 | 896-11020 | WASHER,22mm ID x 37mm OD x 4mm Thk | - flat, 22 x 37 x 4 mm, hardened | |
| 15 | 829-1420 | NUT,M20, Cl 10 | | |
| 16 | 135247A1 | PIN | - swing cylinder rod end to swing tower | |
| 17 | 495-81227 | WASHER,52.38mm ID x 74.63mm OD x 1.7mm Thk | - flat, 2-1/16 x 2-15/16 x 1/16 inch | |
| 18 | 103-16200 | SNAP RING,#200, Ext | Ring, Snap, , Pin #200, Ext | |
| 19 | 243084A1 | LOCK WASHER,72mm ID x 146mm OD x 5mm Thk | - bearing, special, 5 mm thick, swing tower, replaces D136699 6 mm thick washer | |
| 20 | 134167A1 | SHIM,72mm ID x 140mm OD x 2.05mm Thk | - 2.05 mm (.08 inch) thick | |
| 21 | D151065 | PIN,70mm OD x 152mm L | Lower, swing tower to frame, grease fitting mounts in top of pin | |
| 22 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | - 67 x 83 x 2.0 mm | |
| 23 | 800-40070 | SNAP RING,M70 Ext | RING - external retaining, No. 70, pin retaining | |
| 24 | D136392 | SHIM,72mm ID x 89mm OD x 3.05mm Thk | (M72 ID x 89 OD), Upper 3.05mm Thk | |
| 25 | D136700 | SHIM,67mm ID x 83mm OD x 1.57mm Thk | - 67 x 83 x 2.0 mm, lower | |
| 26 | D136391 | SHIM,72mm ID x 89mm OD x 1.57mm Thk | (M72 ID x 89 OD) 1.57mm Thk | |
| 27 | 800-40065 | SNAP RING,M65, Ext | RING - external retaining, No. 65, pin retaining, lower | |
| 28 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | |
| 29 | 132890A1 | PIN | - swing tower to frame, upper | |
| 30 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 31 | 800-40065 | SNAP RING,M65, Ext | RING - external retaining, No. 65, pin retaining | |
| 32 | D149239 | PIN | - swing stop, without snap ring | |
| 33 | 197718A1 | SHIM | - swing cylinder spacer, use as required between bracket and ear of main frame, shims may be required on one end or both ends of bracket, if used | |
