| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101564 | CYLINDER BLOCK | CYLINDER ASSEMBLY - 4 inch (102 mm) ID x 10 inch (254 mm) stroke, clam, right-hand, Includes: Ref. 2 - 19 | |
| | G101564 and G101565 clam cylinders are used with L107652 clam bucket on Figure 9-014. | | |
| 1 | G101565 | CYLINDER BLOCK | CYLINDER ASSEMBLY - 4 inch (102 mm) ID x 10 inch (254 mm) stroke, clam, left-hand, Includes: Ref. 2 - 19 | |
| | G101564 and G101565 clam cylinders are used with L107652 clam bucket on Figure 9-014. | | |
| 2 | G31964 | HYD TUBE,18.69" L | TUBE - cylinder, right-hand | |
| 2 | G31965 | HYD TUBE | TUBE - cylinder, left-hand | |
| G107524 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 3 - 9 | |
| 3 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 4 | NSS | NOT SOLD SEPARAT | RING - retaining, bushing | |
| 5 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod | |
| | Part of seal kit P/N G109423 | | |
| 6 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BEARING - center | |
| | Part of seal kit P/N G109423 | | |
| 7 | G107923 | SEAL,50.77mm ID x 63.63mm OD x 10.69mm Thk | - U-cup, piston rod, wide, with O-ring | |
| | Part of seal kit P/N G109423 | | |
| 7 | G100778 | SEAL | - U-cup, piston rod, service option - severe heat or cold | |
| 7a | G107997 | SEAL,50.37mm ID x 63.68mm OD x 3.05mm Thk | - buffer, grooved, piston rod, narrow | |
| | Part of seal kit P/N G109423 | | |
| 8 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland | |
| | Part of seal kit P/N G109423 | | |
| 9 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | - Gland O-Ring | |
| | Part of seal kit P/N G109423 | | |
| 10 | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 " | |
| 11 | G33626 | ROD | ASSEMBLY - piston, 2 inch (51 mm) diameter, Includes: Ref. 12 | |
| 12 | D33127 | BUSHING,38.33mm ID x 47.63mm OD x 12.7mm L | - piston rod | |
| 13 | G100438 | PISTON,100.89mm Bore, 32.8mm Rod, 50.7mm W | - cylinder | |
| 14 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | |
| | Part of seal kit P/N G109423 | | |
| 15 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | - backup, piston seal | |
| | Part of seal kit P/N G109423 | | |
| 16 | G100448 | RING,101.6mm OD, Ext | - wear, piston | |
| | Part of seal kit P/N G109423 | | |
| 17 | 28-2040 | BOLT,Hex, 1-1/4" - 12 x 2-1/2", Gr 8 | - Hex, 1-1/4"-12 NF x 2-1/2", G8 | |
| 18 | G32351 | WASHER | - hardened | |
| 19 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | |
| G109423 | GASKET KIT | KIT - seal, Includes: Refs. 5, 6, 7, 7A, 8, 9, 14, 15 & 16 | |
