| № | Номер | Название | Опции | Альт |
|---|
| G101276 | CYLINDER | ASSEMBLY - right-hand bucket, 4" (102 mm) diameter x 28-3/8" (721 mm) stroke, no longer available, replace with G109770 cylinder assembly on Figures 8-56, Includes: Ref. 1 - 19 | |
| G101277 | CYLINDER | ASSEMBLY - left-hand bucket, 4" (102 mm) diameter x 28-3/8" (721 mm) stroke, no longer available, replace with G109285 cylinder assembly on Figure 8-54, Includes: Ref. 1 - 19 | |
| 1 | G101706 | TUBE,4 mm DIA x 1051.05 mm L | - G101276 cylinder | |
| 1 | G101707 | CYLINDER,4 mm DIA x 1051.05 mm L | TUBE - G101277 cylinder, not shown | |
| 2 | D44543 | BUSHING,63.75mm ID x 76.2mm OD x 19.3mm L | - tube | |
| G107524 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 3 - 9 | |
| 3 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 4 | NSS | NOT SOLD SEPARAT | RING - center bushing | |
| 4a | G102569 | PLUG | - nylon, thread locking, gland, if used | |
| 5 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod | |
| | Part of seal kit P/N G109423 | | |
| 6 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | |
| | Part of seal kit P/N G109423 | | |
| 7 | G107923 | SEAL,50.77mm ID x 63.63mm OD x 10.69mm Thk | U-CUP SEAL - piston rod, wide, with O-ring | |
| | Part of seal kit P/N G109423 | | |
| 7a | G100778 | SEAL | U-CUP SEAL - piston rod, service option - extreme heat or cold | |
| 7b | G107997 | SEAL,50.37mm ID x 63.68mm OD x 3.05mm Thk | - piston rod, narrow, used in addition to item 7 in some glands | |
| | Part of seal kit P/N G109423 | | |
| 8 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland seal | |
| | Part of seal kit P/N G109423 | | |
| 9 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | - Gland O-Ring | |
| | Part of seal kit P/N G109423 | | |
| 10 | 187-1524 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - hex head, self-tapping, No. 8 NC x 3/8 inch, if used, not required when nylon plug is used | |
| 11 | G33594 | PISTON | ROD - piston, 2" (51 mm) diameter, Includes: Ref. 12 | |
| 12 | D38943 | BUSHING,51.02mm ID x 63.5mm OD x 28.6mm L | - piston rod | |
| 13 | G100438 | PISTON,100.89mm Bore, 32.8mm Rod, 50.7mm W | - cylinder | |
| 14 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | |
| | Part of seal kit P/N G109423 | | |
| 15 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | - piston | |
| | Part of seal kit P/N G109423 | | |
| 16 | G100448 | RING,101.6mm OD, Ext | - wear | |
| | Part of seal kit P/N G109423 | | |
| 17 | 28-2048 | BOLT,Hex, 1-1/4" - 12 x 3", Gr 8 | | |
| 18 | G32351 | WASHER | - hardened | |
| 19 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| G109423 | GASKET KIT | KIT - seal, Includes: Refs. 5, 6, 7, 7B, 8, 9, 14, 15 & 16 | |
