| № | Номер | Название | Опции | Альт |
|---|
| 1 | G103773 | CYLINDER | ASSEMBLY - swing, 4" (102 mm) ID x 7/32" (285 mm) stroke, Includes: Ref.#2 - 24 | |
| | The cylinder assembly part number is stamped on some cylinder glands and tubes. | | |
| 2 | G103774 | TUBE,469.89" L | CYLINDER ASSEMBLY - stabilizer, left-hand, 4" (102 mm) ID x 21.77" (553 mm) stroke, Includes: Ref.#2 - 24 | |
| | The cylinder assembly part number is stamped on some cylinder glands and tubes. | | |
| 3 | G34875 | BUSHING,50.67mm ID x 60.25mm OD x 33.53mm L | - tube trunnion | |
| G104407 | GLAND | ASSEMBLY - cylinder, replaces glands without nylon plug, Includes: Ref.#4 - 10 | |
| 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 5 | NSS | NOT SOLD SEPARAT | RETAINING RING - bushing | |
| 5a | G102569 | PLUG | - nylon, thread locking, gland, if used | |
| 6 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod, outer | |
| | Part of seal kit P/N G105545 | | |
| 7 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | |
| | Part of seal kit P/N G105545 | | |
| 8 | D36971 | RING | SEAL - piston rod, wide | |
| | Part of seal kit P/N G105545 | | |
| 8a | G102647 | SEAL | - piston rod, narrow, used in addition to Ref.# 8 in some glands | |
| | Part of seal kit P/N G105545 | | |
| | Part of seal piston rod service option P/N G100778 | | |
| 9 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland | |
| | Part of seal kit P/N G105545 | | |
| 10 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | - Gland O-Ring | |
| | Part of seal kit P/N G105545 | | |
| 11 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8-32 NC 1/4", if used, not required when nylon plug is used | |
| 12 | G34775 | ROD ASSY. | ROD ASSEMBLY - piston, 2" (51 mm) diameter | |
| 13 | G34854 | BUSHING,44.58mm ID x 53.98mm OD x 22.35mm L | - piston rod | |
| 14 | G101309 | PISTON | - cylinder | |
| 15 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | |
| | Part of seal kit P/N G105545 | | |
| 16 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | BACKUP RING - piston seal | |
| | Part of seal kit P/N G105545 | | |
| 17 | G100448 | RING,101.6mm OD, Ext | - wear, piston | |
| | Part of seal kit P/N G105545 | | |
| 18 | G102826 | PIN | - cushion relief | |
| 19 | D38683 | SPRING | - cushion relief | |
| 20 | 211-17 | BALL,3/4" Dia | - cushion relief spring | |
| 21 | D41359 | BOLT,Hex, 1 1/4" - 12 x 63.5mm, Gr 8 | - piston and cushion relief | |
| 22 | G32351 | WASHER | - hardened | |
| 23 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| 24 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| G105545 | SEAL | KIT - seal, Includes: Ref. 6 - 10, 15, 16 and 17, same as G102401 kit plus Ref.# 8A above | |
| G100778 | SEAL | - piston rod, service option - severe heat and cold, Includes: Ref. 8A | |
