(09-450) - LOADER FRAME AND MOUNTING PARTS

№	Номер	Название	Опции
1	D134402	FRAME ASSY	FRAME loader lift, standard, has (4) cage nuts on left-hand arm and (2) cage nuts on cross tube, no longer available, for service order P/N D141775 loader frame and (1) P/N D88417 cage nut, Includes: Ref. 2 thru 4
		The cage nuts welded on the inside of the frame are P/N D88417.
1	D136112	FRAME	loader lift, models with clam bucket auxiliary hydraulics, has (4) cage nuts on left-hand arm, (3) cage nuts on cross tube, and (3) cage nuts on right-hand arm, no longer available, Includes: Ref. 2 thru 4
		The cage nuts welded on the inside of the frame are P/N D88417.
		For service order P/N D141775 loader frame and (1) P/N D88417 cage nut.
1a	D141775	FRAME	loader lift, service replacement, Includes: Ref. 2 thru 4
2	D37392	BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L	loader frame pivot
3	D37763	BUSHING	bucket cylinder link pivot
4	D129240	BUSHING,40.23mm ID x 50mm OD x 70mm L	bucket mounting
5	D136526	SHAFT	loader lift frame pivot
6	D143409	WASHER,44.86mm ID x 63.5mm OD x 3.31mm Thk	flat, special
7	R27181	WASHER	SPRING, Belleville, special, lift frame pivot shaft seal
8	D25280	SNAP RING,#175, Ext	Ring, Snap, , lift frame pivot shaft #175, Ext
9	REF	INSTRUCTION	CYLINDER loader lift, right-hand and left-hand, left-hand not shown, for correct assembly and components see Figure 08-408
10	D135669	PIN,50mm OD x 277mm L	lift cylinder pivot, closed end
11	D143431	WASHER	special, outer side only
12	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	flat, 1-13/16" ID x 2-1/2" OD x 1/8" thick, outer
13	D25280	SNAP RING,#175, Ext	Ring, Snap, , pin, lift cylinder closed end, outer #175, Ext
14	195-2155	WASHER,2 1/16" x 3" x .109"	flat, 2-1/16" ID x 3" OD x 1/8" thick, inner
15	800-50050	SNAP RING,M50, Ext, Hvy	RING snap, pin retaining, lift cylinder closed end, inner
16	D138247	STRUT	support, loader frame, left-hand lift arm only
17	D121047	GROMMET	support strut
18	D120675	HITCH PIN	PIN lock, cotterless hitch
19	D135603	PIN,40mm OD x 178mm L	left-hand lift cylinder rod end
20	D135604	AXLE PIN,40mm OD x 152mm L	PIN right-hand lift cylinder rod end
21	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining, lift cylinder rod end, outer
22	195-2140	WASHER,1 7/16" x 2" x .065"	flat, 1-7/16" ID x 2" OD x 1/16" thick, inner
23	800-50035	SNAP RING,M35, Ext	RING snap, pin retaining, lift cylinder rod end, inner
24	G108486	CYLINDER ASSY.	CYLINDER loader bucket, right-hand, not shown, see Figure 08-410
25	G108487	CYLINDER ASSY.	CYLINDER loader bucket, left-hand, see Figure 08-410
26	D137876	PITMAN	LINK bucket cylinder, right-hand and left-hand, outer, Includes: Ref. 30 and 31
27	D137875	PITMAN	LINK bucket cylinder, left-hand, inner, with return-to-dig indicator, Includes: Ref. 30 and 31
28	D137877	PITMAN	LINK bucket cylinder, right-hand, inner, with extra hole for antirollback rod, models without clam bucket, see Ref. 29 for models with clam bucket, Includes: Ref. 30 and 31
29	D137874	PITMAN	LINK bucket cylinder, right-hand, inner, with extra hole for antirollback rod, models with clam bucket, see Ref. 28 for models without clam bucket, Includes: Ref. 30 and 31
30	D129272	BUSHING	one per each link, Ref. 26-29
31	NSS	NOT SOLD SEPARAT	CAP, one per each link, Ref. 26-29
		Can be replaced with P/N D151034 closed end bushing
32	D132076	SPACER,23.75mm ID x 38.07mm OD x 135mm L	BUSHING cylinder links, spacer
33	113-931	BOLT,Hex, 1" - 8 x 7-1/2", Gr 5	hex head, 1"-8 NC x 7-1/2", plated
34	195-553	WASHER,1", SAE	flat, 1", plated
35	129-110	NUT,1"-8, G5
36	D129279	PIN,40mm OD x 109mm L	bucket cylinder rod end
37	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining, bucket cylinder rod end
38	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT
39	D129256	PIN,40mm OD x 175mm L	loader lift frame to lower bucket mounting hole
40	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining, lift frame to lower bucket mounting hole
41	D133235	PITMAN	LINK bucket, left-hand, with bushings, no longer available, order P/N D139595 link, see Ref. 53, Includes: Ref. 43 and 44
42	D133236	LINK	bucket, with bushings, with bucket position indicator, right-hand, models without clam bucket, see Ref. 45 for models with clam bucket, no longer available, Includes: Ref. 43 and 44
		For service order (1) P/N D139595 link, (1) P/N D121194 pointer, (2) P/N 413-520 bolts, (2) P/N 492-11031 washers, and (2) P/N 425-105 nuts, see Ref. 53 thru 57.
43	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	two per each link, Ref. 41 and 42
44	D129240	BUSHING,40.23mm ID x 50mm OD x 70mm L	bucket mounting, one per each link, Ref. 41 and 42
45	D138975	PITMAN	LINK bucket, with bucket position indicator, right-hand, models with clam bucket, see Ref. 42 for models without clam bucket, no longer available, Includes: Ref. 46-48
		For service, order (1) P/N D139595 link, (1) P/N D123157 pointer, (2) P/N 413-520 bolts, (2) P/N 492-11031 washers, and (2) P/N 425-105 nuts, see Ref. 53 and 55 thru 58.
46	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	link, bucket indicator end
47	D129240	BUSHING,40.23mm ID x 50mm OD x 70mm L	bucket mounting
48	D120546	INDICATOR	POINTER bucket position, welded to position indicator
49	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT
50	D129257	PIN,40mm OD x 175mm L	link to upper bucket mounting hole
51	800-50040	SNAP RING,M40, Ext	RING snap, pin retaining, link to bucket
52	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8" NPT
53	D139595	PITMAN	LINK bucket, without bushings, left-hand or right-hand, with or without clam bucket
54	D121194	POINTER	bucket position, models without clam bucket
55	413-520	BOLT,Hex, 5/16" - 18 x 1-1/4", Gr 5	hex, 5/16" NC x 1-1/4"
56	492-11031	LOCK WASHER,5/16"	WASHER, LOCK, 5/16"
57	425-105	NUT,5/16"-18, G5	- hex, 5/16 inch NC
58	D123157	SUPPORT	POINTER bucket position, models with clam bucket