| № | Номер | Название | Опции | Альт |
|---|
| 1 | D80087 | ARM ASSY. | LOADER FRAME - lift, Includes: Ref. 2 and 3 | | | 2 | D37392 | BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L | - loader lift frame pivot | | | 3 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - bucket pivot | | | 4 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, , Special short 90º, 1/8" NPT x .84" lg | | | 5 | D129819 | SHAFT | PIN - pivot | | | 6 | D62194 | WASHER | - flat, special | | | 7 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 8 | D62193 | PIN | - lift cylinder pivot, if used | | | 8a | D37611 | PIVOT PIN,44.45mm OD x 255.59mm L | PIN - lift cylinder pivot, if used | | | 9 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 10 | 113-247 | BOLT,Hex, 3/8" - 16 x 3-1/4", Gr 5 | If used Hex, 3/8"-16 x 3 1/4", G5 | | | 11 | 131-666 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8" - 16 NC, plated, if used | | | 12 | REF | INSTRUCTION | CYLINDER - loader lift, left-hand, parts list Figure 366 | | | 13 | REF | INSTRUCTION | CYLINDER - loader lift, right-hand, parts list Figure 366 | | | 14 | D67357 | PIN | - right-hand lift cylinder to loader frame, with hole for bolt and nut, if used, see Figure 398 for pin used on models with antirollback | | | 14a | D44881 | PIN,38.1mm OD x 136.4mm L | - right-hand lift cylinder to loader frame, without hole, used with Ref. 16A, if used | | | 15 | 113-248 | BOLT,Hex, 3/8" - 16 x 2-3/4", Gr 5 | If used Hex, 3/8"-16 x 2 3/4", G5 | | | 16 | 131-666 | LOCK NUT,3/8"-16, GB | NUT - hex, self-locking, 3/8" - 16 NC, plated, if used | | | 16a | D25279 | SNAP RING,M35, Int | - pin retaining, if used | | | 17 | D32933 | PIVOT PIN,31.75mm OD x 127mm L | PIN - tilt cylinder pivot | | | 18 | D26918 | SNAP RING,#125, Ext | Ring, Snap, , pin #125, Ext | | | 19 | REF | INSTRUCTION | CYLINDER - bucket, right-hand, parts list Figure 368 | | | 20 | REF | INSTRUCTION | CYLINDER - bucket, left-hand, parts list Figure 368 | | | 21 | D34316 | PIN | -, Serial Range: cylinder-bucket | | | 22 | D32933 | PIVOT PIN,31.75mm OD x 127mm L | PIN - cylinder to blade or pallet forks | | | 23 | D26918 | SNAP RING,#125, Ext | Ring, Snap, , pin #125, Ext | | | 24 | NLS | NO LONGER SERVICED | -, Serial Range: frame-bucket | | | 25 | D25279 | SNAP RING,M35, Int | - pin retaining | | | 26 | D80277 | TUBE | - bucket level indicator | | | 27 | D80275 | ROD | - bucket level indicator | | | 28 | 214-265 | HOSE CLAMP,#56, 3.06" - 4", Type F Worm | CLAMP - indicator tube to cylinder tube | | | 29 | D38648 | BLOCK | SPACER - rubber, tube | | | 30 | D74356 | CLAMP | - indicator rod to cylinder rod | | | 31 | 113-207 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | | | | 32 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 33 | 129-103 | NUT,Hex, 3/8" - 16, Gr 5 | NUT, 3/8"-16, G5 | | | 34 | D80739 | PIN | - left-hand lift cylinder to loader frame, with hole for bolt and nut, if used | | | 34a | D28649 | PIN | - left-hand lift cylinder to loader frame, without hole, if used | | | 35 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - spacer | | | 36 | D25279 | SNAP RING,M35, Int | - pin retaining | | | 37 | D77765 | STRUT | - support, loader frame, no longer available, for service order D121846 strut and (2) D121047 grommet | | | 37a | D121846 | STRUT | - support, loader frame | | | 38 | D79692 | PAD | - strut, used with D77765 strut | | | 38a | D121047 | GROMMET | - strut, used with D121846 strut | | | 39 | L78801 | AXLE PIN | PIN - 1/2" (13 mm) diameter | | | 40 | D89691 | STRIP | PAD - rubber, cylinder rod protection, used with D77765 strut | | | 41 | 345-44 | ADHESIVE | - spray can, 23 oz., for attaching rubber pads to metal surface, not shown | |
|
|