| № | Номер | Название | Опции | Альт |
|---|
| 1 | 627-12030 | BOLT,Hex, M12 x 1.75 x 30mm, Cl 10.9, Full Thd | - hex, full threads, 12 - 1.75 x 30 mm, class 10.9 | | | 2 | 150811A1 | WASHER | - flat, special, 12 mm | | | 3 | 159517A1 | SUPPORT ASSY. | STAND - rail and platform mounting, right hand | | | 4 | 159513A1 | RAIL ASSY. | RAIL - slide, seat | | | 6 | 153081A1 | WASHER | - flat, special | | | 7 | 159331A1 | BRACKET | - 90 degree, Serial Range: lever-rail | | | 8 | 159516A1 | LEVER | - seat adjusting, forward and reverse | | | 9 | 159314A1 | COVER | GUARD - front, rail protection | | | 10 | 159519A1 | PLUG | COVER - bolt head | | | 11 | 159518A1 | SUPPORT ASSY. | STAND - rail and platform mounting, left-hand | | | 12 | 159533A1 | SCREW | - machine, special | | | 13 | 159287A1 | COVER | BRACKET - 90 degree angle | | | 14 | 159260A1 | COVER | GUARD - rail protection, left-hand side | | | 15 | 152718A1 | BOLT,Spcl, Hex Wshr, M12 x 25mm, Cl 10.9 | - special, rail mounting | | | 16 | 159502A1 | SPRING | - extension | | | 18 | 150409A1 | WASHER | - flat, special, 10.5 x 21 x 3.2 mm | | | 19 | 159317A1 | BRACKET | - 90 degree strap | | | 20 | 627-8016 | BOLT,Hex, M8 x 1.25 x 16mm, Cl 10.9, Full Thd | - hex, full threads, 8 - 1.25 x 16 mm, class 10.9 | | | 21 | 159540A1 | PLATFORM | - seat mounting | | | 22 | 159501A1 | CAP | GRIP - vinyl, forward and reverse lever | | | 23 | 159346A1 | BALL JOINT | EYE - threaded, spring anchor, gate lock control lever | | | 25 | 159539A1 | SPRING | - return, gate lock control lever | | | 26 | 159255A1 | LINK | BELLCRANK - control lever, gate lock | | | 27 | 159254A1 | BRACKET | - lever pivot, gate lock | | | 28 | 159249A1 | PIN | - grooved, spring anchor | | | 29 | 627-10020 | BOLT,Hex, M10 x 1.5 x 20mm, Cl 10.9, Full Thd | - hex, full threads, 10 - 1.5 x 20 mm, class 10.9 | | | 30 | 159547A1 | CAP | GRIP - vinyl, gate lock control lever | | | 31 | 159546A1 | LEVER | - control, gate lock | | | 32 | 159541A1 | LIMIT SWITCH | SWITCH - limit, gate lock control | | | 33 | 150413A1 | GROMMET | - rubber | | | 34 | 150472A1 | FLANGE NUT | - hex flange, special, 8 mm - 1.25 | | | 35 | 738-1525 | LOCK PIN,M5 x 25, Slotted | PIN - roll, 5 x 25 mm | | | 36 | 159244A1 | RING | BUSHING - lever, gate lock control | | | 37 | 156559A1 | BOLT,High Strength, Hex, M6 x 12mm, W/ LW | BOLT - hex, special | | | | 159538A1 console limit switch has two wire leads (one is white and one is black) that are each 100 mm long. This switch is wired normally open. The Sumitomo part # is probably stamped somewhere on the switch body. The Sumitomo part # is KHN1432. | | | | | There is another limit switch used for the gate lock control. This limit switch is part # 159541A1. It has two wire leads (both are green) that are each 150 mm long. This switch is wired normally closed. The Sumitomo part # is probably stamped somewhere on the switch body. The Sumitomo part # is KHN1439. | | | | 5 | 627-8025 | BOLT,Hex, M8 x 1.25 x 25mm, Cl 10.9, Full Thd | - hex, full threads, 8 - 1.25 x 25 mm, class 10.9 | | | 17 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 24 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | |
|
|