| № | Номер | Название | Опции | Альт |
|---|
| 1 | R34195 | | FRAME - ref 4 weld on, before tractor sn 8380422 | | | 1 | R36472 | | FRAME - ref 4 bolted on, tractor sn 8380422 and after | | | 1 | R41038 | FRAME ASSY | FRAME - tractor sn 8380422 and after | | | 2 | 13-1040 | BOLT,Hex, 5/8" - 11 x 2-1/2", Gr 5 | | | | 3 | T53567 | BEARING WASHER,16.66mm ID x 33.33mm OD x 3.43mm Thk | WASHER - hardened | | | 4 | R36471 | LARGE PLATE | PLATE - mounting, R36472 and R41038 frame | | | 5 | 131-656 | LOCK NUT,5/8"-11, GB | NUT - hex, self lock, 5/8" - 11 NC | | | 6 | 26-1240 | BOLT,Hex, 3/4" - 10 x 2-1/2", Gr 8 | HHCS - 3/4" - 10 NC x 2-1/2", grade 8 | | | 7 | D34666 | WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk | - hardened | | | 8 | R28317 | BLOCK | SPACER - frame | | | 9 | R29273 | GUARD | - tank support | | | 10 | 13-824 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd | | | | 11 | 92-8 | LOCK WASHER,1/2" | | | | 12 | R24718 | WASHER | - hardened, 1/2" | | | 13 | REF | INSTRUCTION | TRANSMISSION - see figure 134 | | | 14 | R28522 | | GUARD - transmission, standard dozer | | | | Also order R29456 Bracket if equipped with winch | | | | 15 | 13-1032 | BOLT,Hex, 5/8" - 11 x 2", Gr 5 | | | | 16 | T53567 | BEARING WASHER,16.66mm ID x 33.33mm OD x 3.43mm Thk | WASHER - special | | | 17 | REF | INSTRUCTION | GUARD - see Winch Catalog for Winch Guard | | | 17 | R28858 | | GUARD - transmission, heavy duty dozers with drawbar | | | 18 | 13-1032 | BOLT,Hex, 5/8" - 11 x 2", Gr 5 | | | | 19 | T53567 | BEARING WASHER,16.66mm ID x 33.33mm OD x 3.43mm Thk | WASHER - special | | | 20 | R26886 | PLATE | - oil drain cover | | | 21 | 13-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | | | | 22 | 92-6 | LOCK WASHER,3/8" | | | | 23 | R36372 | GUARD | - transmission, rear | | | 24 | 13-1624 | BOLT,Hex, 1" - 8 x 1-1/2", Gr 5, Full Thd | | | | 25 | 195-53 | WASHER,1" x 2" x .134" | - flat, 1" | | | 26 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | | 27 | 92-6 | LOCK WASHER,3/8" | | | | 28 | 195-25 | WASHER,3/8" | - flat, 3/8" | | | 29 | R32719 | GUARD | - transmission, ripper models, 1 piece, use R35698, R35676, (2) 13-816 and (2) 192-8 for service | | | 30 | R35698 | GUARD | - upper, transmission, ripper models, 2 piece | | | 31 | R35676 | GUARD | - lower, transmission, ripper models, 2 piece | | | 32 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | | | 32a | 92-8 | LOCK WASHER,1/2" | | | | 33 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | | | 34 | 92-8 | LOCK WASHER,1/2" | | | | 35 | 195-33 | WASHER,1/2" | - flat, 1/2" | | | 36 | R33702 | | PLATE - cover, if used | | | 37 | R33703 | | BAR - plate retaining | | | 38 | 13-824 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd | | | | 39 | 92-8 | LOCK WASHER,1/2" | | | | 40 | R35516 | | SCREEN - R29101 rear guard | | | 41 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | | 42 | 195-28 | WASHER,3/8" | - flat, 3/8" | | | 43 | 92-6 | LOCK WASHER,3/8" | | | | 44 | 25-106 | NUT,3/8"-16, G5 | - hex, 3/8" - 16 NC | |
|
|