| № | Номер | Название | Опции | Альт |
|---|
| 1 | R33729 | | COUNTERWEIGHT - front | | | 2 | 113-717 | BOLT,Hex, 3/4" - 10 x 3-1/2", Gr 5 | Used without pull hook, if used Hex, 3/4"-10 x 3 1/2", G5 | | | 2a | 113-718 | BOLT,Hex, 3/4" - 10 x 4-1/2", Gr 5 | Used with pull hook, if used Hex, 3/4"-10 x 4 1/2", G5 | | | 3 | D34666 | WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk | hardened | | | 4 | R32699 | BALANCER | COUNTERWEIGHT - rear, 500 lbs. (226.5 kg), no longer available, replace with ref. 4A, 1450B loader models w/ ripper or winch | | | 4a | R46930 | BALANCER | COUNTERWEIGHT - rear, 500 lbs. (226.5 kg), 1450B loader models w/ ripper or winch | | | 5 | 113-918 | BOLT,Hex, 1" - 8 x 5", Gr 5 | - hex head, 1" - 8 NC x 5", plated, rear counterweight 1450B loader models w/ ripper or winch | | | 6 | D36505 | WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk | 1", hardened, rear counterweight 1450B loader models w/ ripper or winch | | | 7 | 129-110 | NUT,1"-8, G5 | Rear counterweight 1450B loader models w/ ripper or winch 1"-8, G5 | | | 8 | REF | INSTRUCTION | 3000 lbs. (1359 kg), uses six mounting bolts, no longer available, order R53044 counterweight (item 11), eight ref. 13 bolts, and 2 additional ref. 10 washers, rear counterweight 1450B loader models w/ ripper or winch | | | 9 | 15-16144 | BOLT,Hex, 1" - 8 x 9", Gr 5 | hex head, 1" - 8 NC x 9", used with ref. 8, rear counterweight 1450B loader models w/ ripper or winch | | | 10 | D36505 | WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk | hardened, used with ref. 8, rear counterweight 1450B loader models w/ ripper or winch | | | 11 | R53044 | BALANCER | 2866 lbs. (1300 kg), uses eight mounting bolts, rear counterweight 1450B loader models w/ ripper or winch | | | 12 | R53050 | CHANNEL | GUARD - transmission, lower, used with ref. 11, rear counterweight 1450B loader models w/ ripper or winch | | | 13 | 113-903 | BOLT,Hex, 1" - 8 x 4-1/2", Gr 5 | Rear counterweight 1450B loader models w/ ripper or winch Hex, 1"-8 x 4 1/2", G5 | | | 14 | D36505 | WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk | 1", hardened, rear counterweight 1450B loader models w/ ripper or winch | | | 15 | R53047 | DRAWBAR | used with item 11, uses 1-1/4" diameter mounting hardware, replaces that used 1" diameter hardware, rear counterweight 1450B loader models w/ ripper or winch | | | 16 | 26-16116 | BOLT,Hex, 1" - 8 x 7-1/4", Gr 8 | - hex head, 1" - 8 NC x 7-1/4", grade 8, if used, rear counterweight 1450B loader models w/ ripper or winch | | | 17 | D36505 | WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk | 1", hardened, if used, rear counterweight 1450B loader models w/ ripper or winch | | | 18 | 26-20120 | BOLT,Hex, 1-1/4" - 7 x 7-1/2", Gr 8 | - hex head, 1-1/4" - 7 NC x 7-1/2", grade 8, if used, rear counterweight 1450B loader models w/ ripper or winch | | | 19 | D43745 | WASHER | 1-1/4", hardened, if used, rear counterweight 1450B loader models w/ ripper or winch | | | 20 | R26750 | PIN | drawbar, rear counterweight 1450B loader models w/ ripper or winch | | | 21 | A30338 | PIN | self-locking, rear counterweight 1450B loader models w/ ripper or winch | |
|
|