| № | Номер | Название | Опции | Альт |
|---|
| 1 | D35604 | FRAME side, shift, stationary | | |
| 2 | D36801 | ROD | SUPPORT hose | |
| 3 | 132-48 | COTTER PIN,1/8" x 1" | | |
| 4 | REF | INSTRUCTION | HYDRAULIC cylinder, stabilizer, see Figure 054 for proper cylinder | |
| 5 | D35675 | AXLE PIN | STABILIZER cylinder at frame | |
| 6 | D36710 | PIN | STABILIZER cylinder at leg | |
| 7 | 13-1020 | BOLT,Hex, 5/8" - 11 x 1-1/4", Gr 5, Full Thd | | |
| 8 | 92-10 | LOCK WASHER,5/8" | | |
| 9 | 70523 | WASHER,16.67mm ID x 47.63mm OD x 6.35mm Thk | PIN retaining | |
| 10 | D35582 | LEG stabilizer, R.H. | | |
| 11 | D35583 | | SPARE PART STABILIZER, L.H. | |
| 12 | D35680 | AXLE PIN | LEG stabilizer | |
| 13 | D25280 | SNAP RING,#175, Ext | | |
| 14 | D35572 | | SPARE PART EXTENSION stabilizer | |
| 15 | D35569 | AXLE PIN | MOUNTING leg | |
| 16 | D33805 | PIN | RETAINING | |
| 17 | D35563 | PAD | FOOT stabilizer, cleated | |
| 18 | 14-724 | SCREW,Hex, 7/16" - 20 x 1 1/2", Gr 5 | HHCS 7/16" - 20 NF x 1-1/2" | |
| 19 | 92-7 | LOCK WASHER,7/16" | | |
| 20 | 25-117 | NUT,7/16"-20, G5 | HEX 7/16" - 20 NF | |
| 21 | D40469 | SHOE (ASSY) | PAD rubber (optional) | |
| 22 | D29712 | SPECIAL NUT | HEX special, 7/16" - 20 NF | |
| 23 | D35601 | | SPARE PART FRAME side shift, used with D37423 tower only | |
| | Used on models without foot locks or shields. | | |
| 23 | D44345 | | SPARE PART SHIFT side | |
| | Used on models with foot locks or shields. | | |
| 24 | D21927 | BUSHING,51.03mm ID x 63.45mm OD x 50.8mm L | SWING upper, Serial Range: frame-tower | |
| 25 | D23601 | HOUSING | BUSHING pivotal ball type | |
| 26 | 100-21315 | SNAP RING,3.156", Int, #315 | BUSHING retaining, CLAMP P-type, attaches to coolant recovery reservoir | |
| | Part of D14016 Bushing Kit. | | |
| 27 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | | |
| 28 | D37183 | CHAIN (AG) | TRANSPORT | |
| 29 | 13-1020 | BOLT,Hex, 5/8" - 11 x 1-1/4", Gr 5, Full Thd | | |
| 30 | 92-10 | LOCK WASHER,5/8" | | |
| D36438 | COVER | ASSEMBLY locking cylinder, D35601 frame only | |
| 31 | NSS | NOT SOLD SEPARAT | COVER locking cylinder | |
| 32 | NSS | NOT SOLD SEPARAT | PIN stop, 1/2" dia x 4-3/8" | |
| 33 | G15457 | O-RING,0.139" Thk x 3.484" ID, -238, Cl 5, 75 Duro | COVER seal | |
| 34 | D35889 | SEAL,76.2mm ID x 85.72mm OD x 2.39mm Thk | BACKUP | |
| 35 | R13774 | O-RING,0.21" Thk x 2.975" ID, -337, Cl 5, 75 Duro | Tube | |
| 36 | D35523 | PISTON ASSY. | CYLINDER locking | |
| 37 | D35540 | SHOE | FRAME locking | |
| 38 | REF | INSTRUCTION | CYLINDER L.H., swing, see Figures 056 and 058 for proper cylinder | |
| 39 | REF | INSTRUCTION | CYLINDER R.H., swing, see Figures 056 and 058 for proper cylinder | |
| 40 | D30724 | PIN | SWING cylinder to swing tower | |
| 40 | D30724 | PIN | SWINGcylinder to swing tower | |
| 41 | 13-832 | BOLT,Hex, 1/2" - 13 x 2", Gr 5 | | |
| 42 | 92-8 | LOCK WASHER,1/2" | | |
| 43 | 219-39 | FITTING | GREASE 45°, 1/8" NPT | |
| 44 | D30761 | PIN | CYLINDER to swing tower | |
| | Before Backhoe S/N 4175260 | | |
| 44 | D47866 | PIN,38.1mm OD x 139.7mm L | CYLINDER to swing tower | |
| | Backhoe S/N 4175260 and after. | | |
| 44 | D47866 | PIN,38.1mm OD x 139.7mm L | CYLINDER to swing tower | |
| | Backhoe S/N 4175260 and after. | | |
| 45 | 113-635 | X | HHCS 5/8" - 11 NC x 4", grade 8 | |
| 45 | 113-635 | X | HHCS 5/8" - 11 NC x 4" grade 8 | |
| 46 | 92-10 | LOCK WASHER,5/8" | | |
| 47 | 25-1010 | NUT,5/8"-11, G5 | | |
| 48 | 219-39 | FITTING | GREASE 45°, 1/8" NPT, D30761 pin only | |
| D14016 | KIT | BUSHING lower mounting frame, Includes: Ref. No. 26 | |
| 49 | D26991 | BEARING | BEARING spacer | |
| 50 | 100-21315 | SNAP RING,3.156", Int, #315 | BUSHING retaining, CLAMP P-type, attaches to coolant recovery reservoir | |
| 51 | D23601 | HOUSING | BUSHING pivotal ball type | |
| 52 | D42630 | BEARING | RETAINER | |
