| № | Номер | Название | Опции | Альт |
|---|
| 1 | L126100 | VALVE | ASSEMBLY - loader control, parts list Figure 8-022 | | | 2 | 413-844 | BOLT,Hex, 1/2" - 13 x 2-3/4", Gr 5 | - hex, 1/2 NC x 2-3/4 inch | | | 3 | 496-21053 | WASHER,17/32" x 1 1/16" x .134" | - flat, 17/32 x 1-1/16 x 1/8 inch, hardened | | | 4 | 495-21056 | WASHER,1/2" | - flat, 9/16 x 1-3/8 x 3/32 inch | | | 5 | 131-70 | NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC, grade 8 | | | 6 | L125891 | SUPPORT | - hose | | | 7 | 413-844 | BOLT,Hex, 1/2" - 13 x 2-3/4", Gr 5 | - hex, 1/2 NC x 2-3/4 inch | | | 8 | L125336 | HOSE | - 2525 mm long, hose separator to ports 1A and 2A | | | 9 | L125335 | HOSE | - 2025 mm long, hose separator to ports 1B and 2B | | | 10 | R54363 | CLAMP | - hoses, ports 1A and 2A | | | 11 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | - hex, 3/8 NC x 1 inch | | | 12 | 492-11038 | LOCK WASHER,3/8" | | | | 13 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 14 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | ADAPTER - straight, 9/16-18 inch flare x O-ring boss, at port 1B, Incl. Ref. 15 | | | L110143 | VALVE | - check, loader lift, Includes: Ref. 16 - 19 | | | 16 | NSS | NOT SOLD SEPARAT | BODY - check valve | | | 18 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | ADAPTER - straight, 9/16-18 inch flare x O-ring boss, Incl. Ref. 19 | | | 20 | 218-5243 | TEE,9/16" - 18 Male JIC x 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | - 9/16-18 inch flare base x flare x adj O-ring boss, Includes: Ref. 21 | | | 22 | L125551 | PIPE,9.52 mm OD | TUBE - inlet and outlet section to tee at port 1A | | | 23 | L129652 | FITTING | ELBOW - 90 degree, special, Includes: Ref. 24 | | | 25 | L119088 | SUPPORT | BRACKET - hose mounting, left-hand | | | 26 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | - hex, 3/8 NC x 1-1/2 inch | | | 27 | 495-21044 | WASHER,3/8" | (flat, 7/16 x 1 x 5/64 inch) 3/8" | | | 28 | 492-11038 | LOCK WASHER,3/8" | if used 3/8" | | | 29 | 131-217 | LOCK NUT | NUT - hex, self-locking, 3/8 inch NC, grade 8 | | | 30 | L125332 | SUPPORT | BRACKET - hose mounting, right-hand | | | 31 | 413-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 32 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 33 | 425-108 | NUT,1/2" - 13, Gr 5 | NUT, , Hex 1/2"-13, G5 | | | 34 | L124270 | LARGE PLATE | PLATE - mounting, bracket | | | 35 | L124271 | FIXING BRACKET | CLAMP - rubber, hose retaining | | | 36 | 413-648 | BOLT,Hex, 3/8" - 16 x 3", Gr 5 | | | | 37 | D41740 | WASHER | - flat, 25/64 x 1 x 7/64 inch, hardened | | | 38 | L126936 | SPACER | - 34 mm long, hose clamp | | | 39 | 131-217 | LOCK NUT | NUT - hex, self-locking, 3/8 inch NC, grade 8 | | | 40 | S120426 | TUBE | GUARD - hose protector | | | 41 | 1339969C1 | LARGE PLATE | SEPARATOR - hose, loader control | | | 42 | A30881 | SEALING WASHER,19.45mm ID x 31.35mm OD | WASHER - flat, spacer | | | 15 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 17 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 19 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 21 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 24 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | |
|
|