| № | Номер | Название | Опции | Альт |
|---|
| REF | INSTRUCTION | Lift Cylinder, Support Strut, Return-To-Dig and Antirollback | | | 1 | 283736A1 | ARM ASSY. | Incl. Ref 2 - 4 | | | 2 | D127542 | BUSHING,50.2mm ID x 60mm OD x 30mm L | | | | 3 | D49429 | BUSHING | 1,5 ID, 1-7/8 OD, 1-3/8 lg; Bucket Cylinder Link Pivot; No Longer Included With Frame; Purchase Separately; If Used | | | 3a | 450614A1 | GUIDE BUSHING | 1,5 ID, 1-7/8 OD, 2-5/32 lg; Guide Link Pivot; If Used | | | 4 | 109268A1 | BUSHING,40.3mm ID x 50mm OD x 35mm L | | | | 5 | 111522A1 | PIN,50mm OD x 1113.4mm L | | | | 6 | 335177A1 | PIN,50mm OD x 234mm L | | | | 7 | 495-81282 | WASHER,2 1/16" x 3" x .109" | | | | 7a | 181842A1 | WASHER,50.4mm ID x 76mm OD x 3.6mm Thk | | | | 8 | 800-44050 | SNAP RING,M50, Ext | No. 50 | | | 9 | 133936A1 | CYLINDER ASSY.,Double Acting, 44.4mm Rod, 766mm Stroke | 89 ID x 766 mm strk; Loader Lift; See Figure 08-53 | | | 10 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | | | | 11 | 128818A1 | SUPPORT | Return-To-Dig | | | 12 | 142524A1 | PROTECTOR | | | | 13 | 614-6016 | BOLT,Hex, M6 x 1 x 16mm, Cl 8.8, Full Thd | | | | 14 | 515-2179 | CLAMP,5/16", Insul, 1/4" Bolt | (7.9 mm) | | | 15 | 833-40406 | NUT,M6, U | | | | 16 | D137363 | SWITCH | Return-To-Dig | | | 17 | 193-1003 | NUT,Keps, w/LW,#6-32 | | | | 18 | 440-10616 | SCREW,Cross Pan Hd, #6-32 x 1" | | | | 19 | 128312A1 | FLANGE BOLT,Hvy Hex, M10 x 1.5 x 15mm, Gr 8.8 | M10 x 15 | | | 23 | 104824A1 | PIN,12.7mm OD | | | | 24 | 118900A1 | PIN,40mm OD x 179mm L | | | | 25 | 113629A1 | PIN,40mm OD x 155mm L | | | | 26 | 800-44040 | SNAP RING,M40, Ext | | | | 27 | 87712370 | ROD | Antirollback; Replaces 311200A1 | | | 28 | 192815A1 | PIN,1/2" - 13, 1.85" L | | | | 29 | 103-3350 | SNAP RING,#50, .392" Dia, E-Type | | | | 30 | 118901A1 | PIN,40mm OD x 180mm L | | | | 31 | 800-44040 | SNAP RING,M40, Ext | | | | 32 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | | | | 33 | 427-6088 | CLEVIS PIN,3/8" x 3/4" | 3/8 x 7/8; If Used | | | 33a | 427-6100 | CLEVIS PIN,9.53mm OD x 28.7mm L | 3/8 x 1; If Used | | | 34 | 432-612 | COTTER PIN,3/32" x 3/4" | | | | 35 | 495-11053 | WASHER,1/2", SAE | (17/32" x 1-1/16" x 3/32") | | | 36 | 341564A2 | STRUT | | | | 37 | 344892A1 | GROMMET,25.4mm OD, 12.7mm ID, 26mm L | | | | 20 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | 11 x 21 x 2 mm | |
|
|