(9-426) - CHASSIS, STEPS AND HYDRAULIC OIL LEVEL GAUGE

№	Номер	Название	Опции
1	D136587	CHASSIS	ASSEMBLY - includes upper frame, use on models with 24 volt electrical circuit, also includes Ref. 16 - 29 on page 3-57, Includes: Ref. 2 - 22
1	D138637	CHASSIS	ASSEMBLY - includes upper frame, use on models with 12 volt electrical circuit, also includes Ref. 16 - 29 on page 3-57, Includes: Ref. 2 - 22
2	L11494	BUSHING	- front axle pivot
3	D33659	BUSHING,51.02mm ID x 63.5mm OD x 19.1mm L	BUSIHNG - loader lift frame pivot
4	D43508	BUSHING	- lift cylinder pivot
5	D60159	BUSHING,60.55mm ID x 69.85mm OD x 38.1mm L	- swing cylinder pivot, lower
6	D33024	BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L	- stabilizer, Serial Range: leg-frame
7	D34340	BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L	- stabilizer, Serial Range: cylinder-frame
9	L70379	BUSHING,63.75mm ID x 76.2mm OD x 31.75mm L	- upper, swing tower mounting
10	L58870	BUSHING,54.2mm ID x 57.15mm OD x 31.75mm L	- lower, swing tower mounting
11	L57362	SHAFT	- lift cylinder mounting
12	L100349	PLUG	CAP - filler, hydraulic reservoir
13	238-5329	O-RING,0.21" Thk x 1.975" ID, -329, Cl 5, 75 Duro	- filler cap
15	113-409	BOLT,Hex, 1/2" - 13 x 4", Gr 5	- hex head, 1/2" - 13 NC x 4", special thread length
16	L78045	WASHER	- special
17	238-5112	O-RING,0.103" Thk x 0.487" ID, -112, Cl 5, 75 Duro	Cover -112, 70 Duro, .487" ID x .103" Thk
18	L77124	COVER ASSY	COVER - access, hydraulic filter
19	238-5442	O-RING,0.275" Thk x 7.22" ID, -442, Cl 5, 75 Duro	SEAL - cover, hydraulic reservoir
20	L50741	BAR	- cover retainer
21	131-510	LOCK NUT,1/2"-13	NUT - hex, self-locking, 1/2" - 13 NC
22	221-677	DRAIN PLUG,Sq Hd, 3/4" NPT	PLUG - square head, 3/4" NPT, magnetic, reservoir drain
23	D128526	FILTER CARTRIDGE	SCREEN - suction, filter
23a	413-616	BOLT,Hex, 3/8" - 16 x 1", Gr 5	- hex head, 3/8" - 16 NC x 1", plated, Not shown, located on RH frame to mount ground wires, use on models with D138637 chassis only
24	495-21044	WASHER,3/8"	Not shown, located on right-hand frame to mount ground wires, use on models with D138637 chassis only 3/8"
24a	492-11038	LOCK WASHER,3/8"	not shown, located on right-hand frame to mount ground wires, use on models with D138637 chassis only 3/8"
25	77081	FITTING	- grease, 45 degree, 1/8" NPT, special short, replaces straight fitting on some models
26	77818	FITTING	FITITNG - grease, straight, 1/4" - 28 NF, self-tapping
27	D133561	COVER ASSY	COVER - front
28	87689	BOLT,1/2"-13 x 1.813" OAL, Gr 5
29	80679	LOCK WASHER,1/20.507 CST ZND	WASHER, LOCK, 1/2"
30	95-21056	WASHER,1/2"	- flat, , plated 1/2"
31	L102993	STEP	- upper
32	L102994	STEP	- lower
33	13-832	BOLT,Hex, 1/2" - 13 x 2", Gr 5
34	425-108	NUT,1/2" - 13, Gr 5	NUT, , Hex 1/2"-13, G5
	L79110	GAUGE	ASSEMBLY - hydraulic oil level, Includes: Ref. 35 - 42
35	NSS	NOT SOLD SEPARAT	BODY - gauge, includes end plugs
36	238-7112	O-RING,0.103" Thk x 0.487" ID, -112, Cl 7, 75 Duro	Gauge -112, Cl 7, .487" ID x .103" Thk
37	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
38	131-402	NUT,PAL, 1/2"-20	NUT - hex, special locking, 1/2" - 20 NF
39	D75821	STUD	- mounting
40	238-5012	O-RING,0.07" Thk x 0.364" ID, -12, Cl 5, 75 Duro	-012, 70 Duro, .364" ID x .070" Thk, End plugs to body
41	D75820	TUBE	- sight, internal
42	D75819	GASKET	- internal, sight tube
43	221-727	PIPE,Nipple, 1/4" NPT x 18"	NIPPLE - 1/4" NPT x 18"
44	R29556	LOCK	PADLOCK - includes keys, Includes: Ref. 45, 46
45	D93753	PADLOCK	KEY - for Master padlock only
46	D93751	SET OF 2 KEYS	KEY - for Yale padlock only
	D102829	AXLE	KIT - rear axle reinforcement, includes instruction sheet, Includes: Ref. 47 - 50
47	NSS	NOT SOLD SEPARAT	GUSSET - rear
48	NSS	NOT SOLD SEPARAT	PLATE - reinforcement
49	NSS	NOT SOLD SEPARAT	PLATE - axle, right-hand
50	NSS	NOT SOLD SEPARAT	PLATE - axle, left-hand, not shown