| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | TOWER - swing, see Figures 430 and 432 for proper tower | |
| 2 | REF | INSTRUCTION | TOWER - swing, used on models sold in Japan only see Figures 430 and 432 for proper tower, Includes: Ref. 3 and 4 | |
| 3 | D49429 | BUSHING | - pivot, boom cylinder | |
| 4 | D50132 | SPACER,57.15mm ID x 114.3mm OD x 7.94mm L | - mounting frame to swing tower | |
| 5 | | RESERVED | | |
| 6 | 13-812 | BOLT,Hex, 1/2" - 13 x 3/4", Gr 5 | - hex, 1/2" - 13 NC x 3/4" | |
| 7 | 92-8 | LOCK WASHER,1/2" | | |
| 8 | D50149 | BLOCK | - pin locking | |
| 9 | D50700 | PIN | - boom to swing tower | |
| 10 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - 1/8" NPT | |
| 11 | E19443 | BOOM | - backhoe, Includes: Ref. 12 - 15 | |
| 12 | D50698 | BUSHING,51.03mm ID x 69.98mm OD x 40.64mm L | - boom pivot | |
| 13 | D95362 | BUSHING | - boom cylinder anchor | |
| 14 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - dipper pivot | |
| 15 | D37416 | BUSHING | SPACER - bushing | |
| 16 | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Spacer, between swing tower and boom .035" Thk | |
| 17 | D49866 | PIN,38.1mm OD x 96.52mm L | - boom, Serial Range: cylinder-tower | |
| 18 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| 19 | 13-656 | BOLT,Hex, 3/8" - 16 x 3-1/2", Gr 5 | - hex, 3/8" - 16 NC x 3-1/2" | |
| 20 | 131-352 | LOCK NUT,3/8"-16, GA | NUT - hex, lock, 3/8" - 16 NC | |
| 21 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special, if used, not shown | |
| 22 | REF | INSTRUCTION | CYLINDER - hydraulic, boom, see Figures 292 - 298 for proper cylinder | |
| 23 | REF | INSTRUCTION | CYLINDER- hydraulic, dipper, parts list Figures 300 - 304 for proper cylinder | |
| 24 | 13-864 | BOLT,Hex, 1/2" - 13 x 4", Gr 5 | -hex, 3/8" 16 NC x 4" | |
| 25 | D49865 | PIN,50.8mm OD x 304.8mm L | - boom, Serial Range: cylinder-boom | |
| 26 | 131-354 | LOCK NUT,1/2"-13, GA | NUT - hex, lock, 1/2" - 13 NC | |
| 27 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - plain, 2" ID | |
| 28 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| 29 | D72359 | PIN,44.45mm OD x 142.24mm L | - dipper, Serial Range: cylinder-boom | |
| 30 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 31 | D52522 | PIN,44.45mm OD x 211.84mm L | - dipper, Serial Range: cylinder-dipper | |
| 32 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 33 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4" ID | |
| 34 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | WASHER - flat, 3/4" | |
| 35 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 36 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, 2" ID | |
| 37 | D45523 | PIN,50.8mm OD x 276.35mm L | -, Serial Range: boom-dipper | |
| 38 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 39 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 40 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4" ID | |
| 41 | D52522 | PIN,44.45mm OD x 211.84mm L | - dipper to bucket cylinder | |
| 42 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | WASHER - flat, 3/4" | |
| 43 | D63796 | ARM | DIPPER ARM - backhoe, Includes: Ref. 44 - 47 | |
| 44 | D52434 | BUSHING | - dipper at dipper cylinder | |
| 45 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - dipper at boom | |
| 46 | D33094 | BUSHING | - dipper, at bucket cylinder | |
| 47 | D50146 | BUSHING,44.68mm ID x 57.15mm OD x 38.1mm L | - dipper, at bucket links | |
| 48 | D55626 | BUSHING,44.68mm ID x 57.15mm OD x 41.91mm L | - dipper, at bucket | |
| 49 | REF | INSTRUCTION | CYLINDER - hydraulic, bucket, see Figures 306 - 312 for proper cylinder | |
| 50 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 51 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4" ID | |
| 52 | D53818 | PIN,44.45mm OD x 278.89mm L | - bucket linkage to dipper arm | |
| 53 | D77725 | WASHER | - special | |
| 54 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | WASHER - flat, 3/4" | |
| 55 | D61088 | LINK | - bucket cylinder to dipper arm, LH | |
| 56 | D61087 | LINK | - bucket cylinder to dipper arm RH, Includes: Ref. 57 and 58 | |
| 57 | D46405 | BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L | - link, at dipper arm | |
| 58 | D42788 | BUSHING,44.68mm ID x 53.98mm OD x 28.57mm L | - link, at bucket cylinder | |
| 59 | D61244 | LINK | - bucket cylinder to bucket, Includes: Ref. 60 and 61 | |
| 60 | D37495 | BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L | - link, at bucket cylinder | |
| 61 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket | |
| 62 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4" ID | |
| 63 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 64 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special | |
| 65 | D37614 | PIN,38mm Od x 246mm L | -, Serial Range: link-bucket | |
| 66 | D37450 | SPACER,40.89mm ID x 48.26mm OD x 63.5mm L | SPACER - link | |
| 67 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| 68 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | |
| 69 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | -flat, 1-3/4" ID | |
| 70 | D64799 | PIN,44.45mm OD x 370.84mm L | - dipper, Serial Range: arm-bucket | |
| 71 | REF | INSTRUCTION | BUCKET - backhoe, see Figures 388 - 394 for options | |
