Каталоги  Вход

CASE > HEAVY EQUIPMENT > WHEEL LOADERS > 21B > (721B) - CASE WHEEL LOADER (NORTH AMERICA) (3/93-12/98) > (08) - HYDRAULICS > (8-016) - HYDRAULIC CIRCUIT, LOADER AUXILIARY, CONTROL VALVE TO AUX. BUCKET CYLINDERS Z-BAR LOADER

№НомерНазваниеОпцииАльт
1REFINSTRUCTIONVALVE ASSEMBLY - control, three spool, not shown, see figure 8-6 for correct assembly
2REFINSTRUCTIONVALVE ASSEMBLY - control, four spool, see figure 8-6 for correct assembly
3273916PLUG,Hex, 1-5/16" - 12 ORBUse to plug ports of fourth valve section on units with a four spool valve, Includes: Ref. 4 Hex Hd, 1 5/16"-12 ORB
4237-6016O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro16-1, 90 Duro, 1.171" ID x .118" Thk
5L124291FITTINGADAPTER - straight, special, valve to tubes, Includes: Ref. 6 and 7
6237-6016O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro16-1, 90 Duro, 1.171" ID x .118" Thk, Boss end
7238-6020O-RING,0.07" Thk x 0.864" ID, -20, Cl 6, 90 DuroFlare end -020, 90 Duro, .864" ID x .070" Thk
8L126182TUBE,25.4 mm OD- left-hand, at loader control valve
9L126180TUBE,25.4 mm OD x 802, 248 mm L- right-hand, at loader control valve
10L126184HOSE,19.1mm ID x 1100mm L, SAE 100R12- 1100 mm (43-5/16 inch) long, tube at loader control valve to tube on lift arm
11L126486PIPE,25.4 mm ODTUBE - left-hand and right-hand, at loader arm, standard loader models
11a127487A1HYD TUBETUBE - left-hand and right-hand, at loader arm, extended reach loader models
12346304A1SUPPORTBRACKET - mounting, tubes, replaces L126511
13426-616BOLT,Hex, 3/8" - 16 x 1", Gr 8
14492-11038LOCK WASHER,3/8"
15R15257CLAMP- tubes
16426-628BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8- hex, 3/8 NC x 1-3/4 inch, grade 8, Standard loader models
16426-624BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 8- hex, 3/8 NC x 1-1/2 inch, grade 8, Extended reach loader models
17492-11038LOCK WASHER,3/8"
18425-106NUT,3/8"-16, Cl 5
19218-779PLUG,1 5/16"-12, 37 Degree- hex, 1-5/16-12 inch flare, use when auxiliary attachments are not used
20R15257CLAMP- tubes
21426-628BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8- hex, 3/8 NC x 1-3/4 inch, grade 8
22492-11038LOCK WASHER,3/8"
23L32065CLAMP- tubes
24426-640BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 8- hex, 3/8 NC x 2-1/2 inch, grade 8
25496-81003WASHER,10.31mm ID x 26.98mm OD x 3.07mm Thk- flat, 13/32 x 1-1/16 x 3/32 inch, hardened
26492-11038LOCK WASHER,3/8"
27425-106NUT,3/8"-16, Cl 5