| № | Номер | Название | Опции | Альт |
|---|
| 1 | 139808A1 | CYLINDER ASSY. | CYLINDER ASSEMBLY - 102 (4) ID X 292 mm (11-1/2 inch) stroke, swing, used on models with priority swing, if used, Includes: Ref. 2 - 24 | | | | The cylinder assembly part number is stamped on some cylinder glands or tubes. | | | | 2 | 139810A1 | TUBE,101.60mm Dia | ASSEMBLY - cylinder, models with priority swing, does not include 124462A1 end cap assembly (Ref. 22-24) or (1) 276-2446 screw (Ref. 11), if used, Includes: Ref. 3 | | | 2 | 199953A1 | BARREL,101.6mm Diameter | TUBE ASSEMBLY - cylinder, 139808A1 cylinder, replaces 139810A1 tube, models w/priority swing, includes 139810A1 tube, 124462A1 end cap assy (Ref. 22-24) & (1) 276-2446 screw (Ref. 11), if used, not available as an assy, order components, Includes: Ref. 3 | | | 3 | 124568A2 | RING,69.92mm ID x 77mm OD x 28mm L | BUSHING - tube, external | | | NSS | NOT SOLD SEPARAT | GLAND ASSEMBLY - cylinder, Includes: Ref. 4 - 10 | | | 4 | G109899 | GLAND | - cylinder | | | 5 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod | | | | Part of Seal Kit, P/N 122535A1 | | | | 6 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | | | | Part of Seal Kit, P/N 122535A1 | | | | 1542876C1 | SEAL KIT,50.8mm Rod | KIT, SEALS, NSS, Incl Ref 7 and 8 | | | | Part of Seal Kit, P/N 122535A1 | | | | 7 | 1543001C1 | SEAL | - rod, NSS | | | 8 | 1543000C1 | SEAL | - buffer, NSS | | | 9 | 238-5239 | O-RING,0.139" Thk x 3.609" ID, -239, Cl 5, 75 Duro | - 3-5/8 x 1/8 inch wide, gland | | | | Part of Seal Kit, P/N 122535A1 | | | | 10 | G109299 | BACK-UP RING,94.87mm ID x 97.67mm OD x 1.4mm Thk | Gland O-Ring | | | | Part of Seal Kit, P/N 122535A1 | | | | 11 | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 " | | | 12 | 177518A1 | PISTON ROD | ROD ASSEMBLY - piston, 2 inch (51 mm) diameter, Includes: Ref. 13 and 13A | | | 13 | 137248A1 | RING,50.79mm ID x 80.96mm OD x 44.45mm W | BUSHING - piston rod, self-aligning | | | 13a | 100-21315 | SNAP RING,3.156", Int, #315 | Ring, Snap, 3.156", Int, #315 | | | 14 | 112370A2 | JACK PISTON | PISTON - cylinder | | | 14a | 121478A1 | RING,96.72mm ID, Ext | - cast iron, 4 inch OD | | | | Part of Seal Kit, P/N 122535A1 | | | | 15 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | | | | Part of Seal Kit, P/N 122535A1 | | | | 16 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | - backup, piston seal | | | | Part of Seal Kit, P/N 122535A1 | | | | 17 | G100448 | RING,101.6mm OD, Ext | - wear, piston | | | | Part of Seal Kit, P/N 122535A1 | | | | 18 | 28-1664 | BOLT,Hex, 1" - 14 x 4", Gr 8 | - hex, 1-14 x 4 inch, grade 8 | | | 19 | G32303 | WASHER,26.97mm ID x 47.63mm OD x 3.58mm Thk | - flat, special, 1 inch, hardened | | | 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | | | 21 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 124462A1 | CYLINDER END CAP | CAP ASSEMBLY - end, order Ref. 22-24 | | | 22 | 124463A1 | CYLINDER END CAP | CAP - end | | | 23 | 238-5242 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | | | | 24 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | | | | 122535A1 | SEAL KIT | KIT, SEALS, Incl Ref 5, 6, 9, 10, 14A, 15, 16, 17 and P/N1542876C1 and an instruction sheet | |
|
|