| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - control, loader, see figure 8-6 for correct assembly | | | 2 | L124290 | CONNECTOR, ELEC | ADAPTER - straight, special, Includes: Ref. 3 and 4 | | | 3 | 237-6016 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | 16-1, 90 Duro, 1.171" ID x .118" Thk | | | 4 | 238-6024 | O-RING,0.07" Thk x 1.114" ID, -24, Cl 6, 90 Duro | Flare end -024, 90 Duro, 1.114" ID x .070" Thk | | | 5 | 113539A1 | TUBE,31.75 mm OD, 817, 51 mm Length | - valve to cylinder, closed end | | | 6 | 113537A1 | TUBE,31.75 mm OD, 817,222 mm Length | - valve to cylinder, rod end | | | 7 | D67298 | INSULATOR | - rubber | | | 8 | L124293 | MOUNTING CLIP | CLAMP - tube | | | 9 | 426-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 8 | | | | 10 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT - hex, self-locking, 3/8 inch NC | | | 11 | 113541A1 | TUBE | - bucket, to right-hand cylinder, closed end | | | 12 | 113546A1 | TUBE | - bucket, to left-hand cylinder, closed end | | | 13 | 113543A1 | TUBE | - bucket, to right-hand cylinder, rod end | | | 14 | 113548A1 | TUBE | - bucket, to left-hand cylinder, rod end | | | 15 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type 3/4", Insul, 3/8" Bolt | | | 16 | 426-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | | | | 17 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 18 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT - hex, self-locking, 3/8 inch NC | | | 19 | 113532A1 | CLAMP | - tube | | | 20 | D74182 | GROMMET,3/4" ID x 1.46" L | INSULATOR - tube | | | 21 | 426-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 8 | - hex, 3/8 NC x 3/4 inch, grade 8, See note | | | 22 | 495-11041 | WASHER,0.406" ID x 0.812" OD x 0.065" W | (Flat, 13/32 x 13/16 x 1/16") 3/8", SAE | | | 23 | 113607A1 | HOSE ASSY. | HOSE - 1260 mm (49-5/8 inch) long, to bucket cylinder tubes | | | 24 | 113550A1 | TUBE | - cylinder, closed end | | | 25 | 113552A1 | TUBE,19.04 mm OD, 784, 58 mm Length | - cylinder, rod end | | | 26 | 218-5108 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | 90º, 1-1/16-12 inch flare x adj. O-ring boss, Incl. Ref. 27 | | | 27 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 28 | 492-11038 | LOCK WASHER,3/8" | | | | 29 | 426-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 8 | - hex, 3/8 NC x 1-1/2 inch, grade 8 | | | 30 | L119234 | CLAMP | CLAMP - cylinder tubes | | | 31 | 112551A1 | JACK BODY | CYLINDER ASSEMBLY - 114 (4-1/2) ID x 1001 mm (39-13/32 inch) stroke, parts list figure 8-54 | | | 32 | 113533A1 | SUPPORT | BAR - tapped, see note | | | 33 | 231-1446 | NUT,3/8" - 16, Gr 5 | NUT - hex, self-locking, 3/8 inch NC | | | | Ref. 32 113533A1 bar and 33, 231-1446 nut replace Ref. 21, 413-612 bolt in the clamping arrangement for the cylinder tubes, Ref. 11 - 14. | | |
|
|