| № | Номер | Название | Опции | Альт |
|---|
| 1 | 298772A1 | VALVE | ASSEMBLY - auxiliary, backhoe, parts list figure 8-119C | | | 2 | 301114A1 | BRACKET | - mounting | | | 3 | 814-10180 | BOLT,Hex, M10 x 1.5 x 180mm, Cl 8.8 | - hex, 10 - 1.5 x 180 mm | | | 5 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 6 | 302641A1 | STRUT | BRACKET - support | | | 7 | 614-18035 | BOLT,Hex, M18 x 2.5 x 35mm, Cl 8.8, Full Thd | - hex, full threads, 18 - 2.0 x 35 mm | | | 8 | 892-11018 | LOCK WASHER,M18 | WASHER - lock, 18 mm | | | 9 | 218-5108 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | 90º, 1-1/16-12 inch flare x adj. O-ring boss, Incl. Ref. 9A | | | 9a | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 10 | 300905A1 | HOSE | - 610 mm (24 inch) long, auxiliary valve to upper port of auxiliary section of backhoe control valve | | | 11 | 218-5108 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | 90º, 1-1/16-12 inch flare x adj. O-ring boss, Incl. Ref. 12 | | | 12 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 13 | REF | INSTRUCTION | VALVE ASSEMBLY - backhoe control, 7 or 8 spool with auxiliary hydraulics, for correct assembly and components, see figure 8-90, 8-91A, 8-94 or 8-95A | | | 14 | 218-5185 | TEE,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | - 1-1/16-12 inch adj. O-ring branch x flare x flare, Includes: Ref. 15 | | | 15 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 16 | 300906A1 | HOSE | - 460 mm (18-1/8 inch) long | | | 17 | 218-5137 | ELBOW,45 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | - 45 degree, 7/8-14 inch flare x adj. O-ring boss, Incl. Ref 18 | | | 18 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 19 | 300907A1 | HOSE | - 720 mm (28-3/8 inch) long, return | | | 20 | 218-5069 | HYD CONNECTOR,1-5/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | Adapter - straight, 1-5/16-12 inch flare x O-ring boss, Incl. Ref. 21 | | | 21 | 237-6016 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - 1-11/64 ID x 7/64 inch wide | | | 22 | 302097A1 | FITTING | CROSS - special, Includes: Ref. 23 | | | 23 | 237-6016 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - 1-11/64 ID x 7/64 inch wide, Not shown | | | 24 | 218-5490 | TEE,37 Degree, 1 1/16"-12x1 1/16"-12, Fem Sw Runx7/8"-14 Br | - 7/8-14 flare branch x 1-5/16-12 inch flare x swivel | | | 25 | 218-756 | CAP,37 Degree, 7/8"-14 | If used, not required on models with hand held auxiliary hydraulics 37º, 7/8"-14 | | | 26 | 293269A1 | HOSE ASSY. | HOSE - 755 mm (29-3/4 inch) long, main return | | | 27 | 218-5138 | ELBOW,45 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | - 45 degree, 1-1/16-12 inch flare x adj. O-ring boss, Includes: Ref. 28 | | | 28 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 29 | 302472A1 | HOSE,19.05mm ID x 2603mm L | - 2603 mm (102-1/2 inch) long, includes hose guard and (2) banded clamps, pressure port | | | 30 | 256412A1 | BRACKET | - mounting | | | 31 | 144479A1 | CLAMP | - isolation | | | 32 | 144477A1 | ISOLATOR | Rubber | | | 33 | 614-10030 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd | Full Thd Hex, M10 x 30, 8.8 | | | 34 | 814-10040 | BOLT,Hex, M10 x 1.5 x 40mm, Cl 8.8 | | | | 35 | 892-11010 | LOCK WASHER,M10 | | | | 36 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 37 | 253740A1 | HOSE,19.05mm ID x 1760mm L | - 1760 mm (69-5/16 inch) long, includes hose guard and (2) banded clamps, lower port of backhoe control valve auxiliary section to left-hand side of dipper | | | 38 | 252737A1 | BRACKET | CLAMP - auxiliary hose, at pivot block | | | 39 | 144477A1 | ISOLATOR | Rubber, at swing tower | | | 40 | 249775A1 | BRACKET | CLAMP - hose, left-hand, at swing tower | | | 41 | 249773A1 | BRACKET | CLAMP - hose, right-hand, at swing tower | | | 42 | 300939A1 | TUBE | - low pressure return | | | 43 | 218-335 | CAP,37 Degree, 1 1/16"-12 | - hex, 1-1/16-12 inch | | | 44 | 282842A1 | BRACKET | - mounting, tube | | | 45 | D74182 | GROMMET,3/4" ID x 1.46" L | INSULATOR - tube | | | 46 | D143411 | CLAMP,28.96mm ID, 10.31mm Bolt Hole, J Type | - P-type, 3/4 inch ID | | | 47 | 614-10025 | BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8 | | | | 48 | 300952A1 | HOSE | - 335 mm (13-3/16 inch) long | | | 49 | 218-5062 | HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring | ADAPTER - straight, 7/8-14 inch flare x O-ring boss, Includes: Ref. 50 | | | 50 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 51 | 300884A1 | TUBE,15.88 mm OD, 927, 295 mm Length | - small pump supply | | | 52 | 604-20045 | BOLT,Hex, M20 x 45mm, Cl 8.8 | - hex, self-locking, 20 - 2.5 x 45 mm | | | 4 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | - flat, 11 x 20 x 2 mm | |
|
|