| № | Номер | Название | Опции | Альт |
|---|
| 1 | 218-5089 | HYD CONNECTOR,7/16" - 20 Male JIC x 9/16" - 18 Male ORB | Incl. 237-6006 O-Ring | |
| 2 | 87423401 | FITTING,1/4" JIC x 3/8" ORB | Special Orifice; 7/16 fl x 9/16 Or; Incl. 237-6006 O-Ring; If Unit Experiences Dipper Stuttering, As Dipper Is Moving Toward the Unit, Replace Ref 2 Fitting & Ref 30 & 45 Tubes, With (1) 87594363 Snubber, (2) 87594364 Hoses | |
| 2 | 87594363 | DAMPING VALVE | Snubber Fitting; Incl. 237-6006 O-Ring; used In Place of 87423401 Fitting On Models With Dipper Stuttering | |
| 3 | 218-5283 | ELBOW,90 Degree, 7/16"-20, 37 Degree x 9/16"-18, O-Ring | Includes 237-6006 O-Ring; If Used | |
| 4 | 218-5365 | ELBOW,45 Degree, 7/16"-20, 37 Degree x 9/16"-18, O-Ring | Includes 237-6006 O-Ring | |
| 5 | 218-5105 | ELBOW,90 Degree Elbow, 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | Includes 237-6006; 2 Used on Models With Auto Up; 4 Used on Models Without Auto Up | |
| 6 | 218-980 | ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw | | |
| 7 | 218-5063 | HYD CONNECTOR,7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | Includes 237-6012 O-Ring | |
| 8 | 218-5232 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw | | |
| 9 | 814-10045 | BOLT,Hex, M10 x 1.5 x 45mm, Cl 8.8 | | |
| 10 | 814-10060 | BOLT,Hex, M10 x 1.5 x 60mm, Cl 8.8 | | |
| 11 | 896-15010 | WASHER,11mm ID x 24mm OD x 3mm Thk | | |
| 12 | 496-41041 | WASHER,13/32" x 1 1/8" x .134" | | |
| 13 | D52276 | ISOLATOR,10.16mm ID x 28.07mm OD x mm L | Mount | |
| 14 | 87440712 | BRACKET | Valve Mounting | |
| 15 | 614-10030 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd | | |
| 16 | 87426488 | TUBE | Swing Dampening Upper Port | |
| 17 | 87427948 | TUBE | Swing Dampening Lower Port | |
| 18 | 87423034 | BRACKET, SUPPORTING | No Longer Available, Order 87450318 Bracket, Ref 18A | |
| 18a | 87450318 | BRACKET | | |
| 19 | 814-8055 | BOLT,Hex, M8 x 1.25 x 55mm, Cl 8.8 | | |
| 20 | 814-8035 | BOLT,Hex, M8 x 1.25 x 35mm, Cl 8.8 | | |
| 21 | 496-81028 | WASHER,10.31mm ID x 31.75mm OD x 4.06mm Thk | Replaces 496-41041 Washer, 13/32 x 1-1/8 x .134 Used On Some Models | |
| 21a | 87437840 | SPACER,11.5mm L | Not Illustrated | |
| 22 | 895-11008 | WASHER,9mm ID x 16mm OD x 1.6mm Thk | | |
| 23 | 829-1408 | NUT,Hex, M8 x 1.25, Cl 10.9 | | |
| 24 | 87423033 | TEE | Includes 237-6004 O-Ring, 237-6006 O-Ring; Models With Auto Up, If Used | |
| 25 | 87552560 | PRESSURE SWITCH | Includes 237-6004 O-Ring; Models With Auto Up, 12 inch Wire Lead; With Rubber Snubbing; CNH Part Number Stamped On Body Of Switch; North American Models; Replaces 87439163 Switch | |
| 25 | 86992557 | PRESSURE SWITCH | Includes 237-6004 O-Ring; Models With Auto Up, 6 inch Wire Lead; CNH Part Number Stamped On Body Of Switch; European Models | |
| 26 | 87434777 | HYD TUBE | Reducing Valve Tank to Backhoe Valve | |
| 27 | 895-11008 | WASHER,9mm ID x 16mm OD x 1.6mm Thk | | |
| 28 | 614-8025 | BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd | | |
| 29 | 515-2295 | CLAMP,3/8", Insul, 5/16" Bolt | (9.5 mm, M8 Bolt) | |
| 30 | 87437623 | TUBE,.25" OD | Selector A2 to Dipper Port A; If Unit Experiences Dipper Stuttering, As Dipper Is Moving Toward the Unit, Replace Ref 2 Fitting & Ref 30 & 45 Tubes, With (1) 87594363 Snubber, (2) 87594364 Hoses | |
| 30 | 87594364 | HYDRAULIC HOSE,6mm ID x 550mm L | 550 mm (21-21/32 in); Used in Place of 87437623 Tube On Models With Dipper Stuttering | |
| 31 | 86596853 | QUICK MALE COUPLING,9/16"-18 | Includes 9617873 O-Ring | |
| 32 | 218-5243 | TEE,9/16" - 18 Male JIC x 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | Includes 237-6006 O-Ring | |
| 33 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | Incl. 237-6006 O-Ring | |
| 34 | 218-5222 | TEE,37 Degree, 9/16"-18, x 9/16"-18, Fem Sw Run | | |
| 35 | 218-836 | TEE,37 Degree, 9/16"-18 x 9/16"-18, Fem Sw Br | | |
| 36 | 87425225 | ACCUMULATOR,0.16L | Includes 237-6008 O-Ring | |
| 37 | 840-1416 | SCREW,Pan, M4 x 16mm, Cl 4.8 | See Figure 08-15 - 08-20 For Pilot Control Power Supply Control Unit; See Figure 04-21 For Relay | |
| 38 | 218-5053 | HYD CONNECTOR,7/16" - 20 JIC x 7/16" - 20 ORB | Incl. 237-6004 O-Ring | |
| 39 | 218-5105 | ELBOW,90 Degree Elbow, 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | Includes 237-6006 O-Ring | |
| 39a | 87448990 | ELBOW | 90 deg, 9/16 fl x Or; Includes Orifice; Includes 237-6006 O-Ring | |
| 40 | 87439215 | HYD TUBE | Selector A4 to Boom Port A | |
| 41 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | |
| 42 | 892-11010 | LOCK WASHER,M10 | | |
| 43 | 87437627 | HYD TUBE | Reducing Valve to Left-Hand Stabilizer Port A | |
| 44 | 87437631 | TUBE,.25" OD | Reducing Valve to Right-Hand Stabilizer Port A; Used With 90 deg 218-5283 Elbow (Ref 3); No Longer Available, Order 87445557 Tube and 218-5365 45 deg Elbow, Ref 44A, 44B | |
| 44a | 87445557 | HYD TUBE | Reducing Valve to Right-Hand Stabilizer Port A; Used With 45 deg Elbow, Ref 44B | |
| 44b | 218-5365 | ELBOW,45 Degree, 7/16"-20, 37 Degree x 9/16"-18, O-Ring | Includes 237-6006 O-Ring | |
| 45 | 87437621 | TUBE,.25" OD | Selector A1 to Dipper Port B; If Unit Experiences Dipper Stuttering, As Dipper Is Moving Toward the Unit, Replace Ref 2 Fitting & Ref 30 & 45 Tubes, With (1) 87594363 Snubber, (2) 87594364 Hoses | |
| 45 | 87594364 | HYDRAULIC HOSE,6mm ID x 550mm L | 550 mm (21-21/32 in); Used in Place of 87437621 Tube On Models With Dipper Stuttering | |
| 46 | 87437629 | HYD TUBE | Reducing Valve to Right-Hand Stabilizer Port B | |
| 47 | 87437625 | HYD TUBE | Reducing Valve to Left-Hand Stabilizer Port B | |
| 48 | 87439213 | HYD TUBE | Selector A3 to Boom Port B | |
| 49 | 218-5182 | TEE,9/16" - 18 Male JIC x 9/16" - 18 Male JIC x 9/16" - 18 Male ORB | Includes 237-6006 O-Ring | |
| 50 | 218-754 | CAP,37 Degree, 9/16"-18 | | |
| 51 | 87437641 | TUBE,.375" OD | Reducing Valve Pressure to Backhoe Valve; No Longer Available, Order 87352590 Hose, Ref 52 | |
| 52 | 87352590 | HYDRAULIC HOSE | 809 mm (31-7/8 in); Reducing Valve Pressure to Backhoe Valve | |
| 53 | 515-22127 | CLAMP,1/2", Insul, 5/16" Bolt | | |
