| № | Номер | Название | Опции | Альт |
|---|
| 1 | 121741A1 | VALVE, CONTROL | VALVE ASSEMBLY - auxiliary, hand held, one spool, parts list figure 8-116 | | | 2 | 224788A2 | SUPPORT | BRACKET - auxiliary valve mounting to chassis, no longer available, order 224788A3 | | | 2a | 224788A3 | SUPPORT | BRACKET - auxiliary valve, Serial Range: mounting-chassis | | | 3 | 814-12050 | BOLT,Hex, M12 x 1.75 x 50mm, Cl 8.8 | | | | 4 | 896-11012 | WASHER,13.5mm ID x 24mm OD x 3mm Thk | | | | 5 | 814-10060 | BOLT,Hex, M10 x 1.5 x 60mm, Cl 8.8 | | | | 5a | 614-10025 | BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8 | | | | 7 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 8 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | ADAPTER - straight, 9/16-18 inch flare x O-ring boss, Incl. Ref. 9 | | | 11 | 300983A1 | TUBE | - auxiliary valve to solenoid valve inlet | | | 12 | 218-5058 | HYD CONNECTOR,9/16" - 18 Male JIC x 3/4" - 18 Male ORB | ADAPTER - straight, 9/16-18 flare x 3/4-16 inch O-ring boss, Includes: Ref. 13 | | | 13 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 14 | 137012A1 | SOLENOID VALVE | VALVE ASSEMBLY - solenoid, component parts are not serviced separately, attaches to chassis options harness, Ref. 36 on figure 4-18 | | | 15 | 137713A1 | SUPPORT | BRACKET - solenoid mounting | | | 16 | 136977A1 | LARGE PLATE | PLATE - solenoid valve mounting | | | 17 | 814-6060 | BOLT,Hex, M6 x 1 x 60mm, Cl 8.8 | | | | 18 | 895-11006 | WASHER,6.6mm ID x 12mm OD x 1.6mm Thk | | | | 19 | 829-1406 | NUT,Hex, M6 x 1, Cl 10.9 | | | | 20 | 515-2379 | CLAMP,5/16", Insul, 3/8" Bolt | P-type 5/16", Insul, 3/8" Bolt | | | 21 | 218-5128 | ELBOW,90° Elbow, 9/16" - 18 Male JIC x 3/4" - 16 Male ORB | - 90 degree, 9/16-18 flare x 3/4-16 inch adj. O-ring boss, Incl. Ref. 22 | | | 22 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 23 | 192693A1 | HOSE | - 1490 mm (58-11/16 inch) long, solenoid valve outlet to check valve at loader control valve inlet section | | | 27 | 218-5107 | 90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB | - 90 degree, 7/8-14 inch flare x adj. O-ring boss, hand held section of auxiliary valve, see hand held hydraulics on figure 8-44 or 8-46 for attaching hoses, Incl. Ref. 28 | | | 28 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 29 | 218-756 | CAP,37 Degree, 7/8"-14 | If used, not required when hydraulic hoses for hand held hydraulics are attached to fittings 37º, 7/8"-14 | | | 30 | 282428A1 | VALVE PRESSURE RELIE | VALVE, PRESSURE RELIEF, Steering check, loader valve inlet section, see figure 5-4 for attaching steering hose, Includes: Ref. 31 | | | 32 | 218-5158 | PLUG,Hex Hd, 1 1/16"-12 ORB | - hex, 1-1/16-12 inch O-ring boss, auxiliary valve inlet port, now included with 121741A1 auxiliary valve, Includes: Ref. 33 | | | 33 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 38 | 191532A1 | SWITCH | - rocker, auxiliary hydraulics, attaches to side options harness, Ref. 35 on figure 4-18 | | | 39 | 192299A1 | DECAL | - auxiliary hydraulics, switch on instrument panel, see figure 9-154 for decal | | | 40 | 121413A1 | FUSE,15A, Mini, Blue | | | | 42 | 218-5576 | TEE,37 Degree, 1 1/16"-12, 7/8"-14 O-Ring Run, 3/4"-16 | - 3/4-16 fl branch x 1-1/16-12 fl x 7/8-14 inch adj. O-ring, at loader valve inlet section lower port, see figure 5-4 for attaching steering hose, Includes: Ref. 43 | | | 43 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk | | | 44 | 243338A1 | HOSE | - 910 mm (35-7/8 inch) long, loader valve inlet section lower port to auxiliary valve port | | | 47 | 218-5064 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | ADAPTER - straight, 1-1/16-12 inch flare x O-ring boss | | | 48 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 49 | 302474A1 | HOSE | - 500 mm (19-11/16 inch) long, return, auxiliary valve outlet port to tee at backhoe control valve | | | 50 | D132982 | PADDLE,26.87mm ID x 400mm L | SLEEVE - hose guard | | | 51 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon | | | 52 | 136008A1 | SUPPORT | BRACKET - mounting | | | 53 | 814-10050 | BOLT,Hex, M10 x 1.5 x 50mm, Cl 8.8 | | | | 54 | D143422 | SHIN | CLAMP - double tube | | | 55 | D143797 | SHOCK ABSORBER | INSULATOR - 5/8 inch | | | 56 | R46493 | SPACER,0.406" ID x 0.625" OD x 0.850" Thk | - split, 22 mm (7/8 inch) long | | | 57 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 58 | 218-5138 | ELBOW,45 Degree Elbow, 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB | - 45 degree, 1-1/16-12 inch flare x adj. O-ring boss, Includes: Ref. 59 | | | 59 | 237-6012 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | 12-1, 90 Duro, .924 ID x .116" Thk | | | 6 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | - flat, 11 x 20 x 2 mm | | | 9 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | | | 31 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk | |
|
|