(8-28) - BACKHOE BUCKET CYLINDER HYDRAULIC CIRCUIT, MODELS WITHOUT EXTENDABLE DIPPER

№	Номер	Название	Опции
1	REF	INSTRUCTION	VALVE ASSEMBLY - backhoe control, for correct assembly and components, see figure 8-88 - 8-91A
2	814-12045	BOLT,Hex, M12 x 1.75 x 45mm, Cl 8.8	- hex, 12 - 1.75 x 45 mm
3	896-11012	WASHER,13.5mm ID x 24mm OD x 3mm Thk
4	829-1412	NUT,M12, Cl 10.9	- hex, 12 mm - 1.75, class 10
5	413-624	BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5	- hex, 3/8 NC x 1-1/2 inch
6	D52275	WASHER,9.92mm ID x 31.75mm OD x 2.78mm Thk	- flat, special, 25/64 x 1-1/4 x 7/64 inch, hardened
7	D52276	ISOLATOR,10.16mm ID x 28.07mm OD x mm L	INSULATOR - rubber
8	218-5064	HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB	ADAPTER - straight, 1-1/16-12 inch flare x O-ring boss, bucket section upper and lower ports, Incl. Ref. 9
9	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
10	195061A1	HOSE,15.88mm ID x 1235mm L	- 1235 mm (48-5/8 inch) long, includes hose guard and clamp, upper port control valve to bucket cylinder rod end
10a	194916A1	HOSE,19.05mm ID x 1200mm L	- 1200 mm (47-1/4 inch) long, includes hose guard and clamp, lower port control valve to bucket cylinder closed end
11	179404A1	CLAMP	- hose, right-hand outer
11a	176268A1	CLAMP	- hose, left-hand outer
12	176266A1	CLAMP	- hose, center
13	614-8025	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd	- hex, full threads, 8 - 1.25 x 25 mm
14	892-11008	LOCK WASHER,8mm ID	WASHER, LOCK, M8
15	175947A1	CLAMP	- hose, at swing tower
16	132212A1	PLATE	- Hose clamp, at swing tower
17	814-12100	BOLT,Hex, M12 x 1.75 x 100mm, Cl 8.8
18	832-10412	NUT,M12 x 1.75, Cl 8	NUT, LOCK, M12 x 1.75, Cl 8
19	L18337	CABLE TIE,9.95"-12.1" lg	STRAP - tie, 15 inch, nylon, retaining
20	176362A1	HYD TUBE,19.05 mm OD	TUBE - right-hand side of boom, to bucket cylinder closed end
21	176366A1	HYD TUBE,25.4 mm OD	TUBE - left-hand side of boom, to bucket cylinder rod end
22	182035A1	CLAMP	- bucket cylinder tubes to inner sides of boom
23	814-12080	BOLT,Hex, M12 x 1.75 x 80mm, Cl 8.8
25	832-10412	NUT,M12 x 1.75, Cl 8	NUT, LOCK, M12 x 1.75, Cl 8
26	221525A1	CLAMP,26mm ID	-Tube, boom
27	814-12060	BOLT,Hex, M12 x 1.75 x 60mm, Cl 8.8
28	832-10412	NUT,M12 x 1.75, Cl 8	NUT, LOCK, M12 x 1.75, Cl 8
29	144499A1	HOSE	- 1210 mm (47-5/8 inch) long, includes hose guard and clamp, right-hand bucket tube on boom to bucket cylinder rod end tube
30	256091A1	HYD TUBE,19.05 mm OD, 906, 58 mm Length	TUBE - bucket cylinder rod end, Replaces 136436A1, no longer available, order 314772A1 tube
30a	314772A1	RIGID TUBE	Bucket cylinder rod end
31	218-5064	HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB	ADAPTER - straight, 1-1/16-12 inch flare x O-ring boss, bucket cylinder rod end, Incl. Ref. 32
32	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
33	296434A1	CYLINDER,Double Acting, 69.8mm Rod, 872mm Stroke	ASSEMBLY - 95 (3-3/4) ID x 872 mm (34-5/16 inch) stroke, bucket, parts list figure 8-140
33	296434A1R	REMAN-HYD CYLINDER	590SL Series 2
33	296434A1C	CORE-HYD CYLINDER	Return Number
34	214-1472	HOSE CLAMP,#72, 4.06" - 5", Type F Worm	CLAMP, HOSE, , Adj. #72, 4.06/5.00 Type F Worm
35	141656A1	HOSE	- 1185 mm (46-21/32 inch) long, includes hose guard and clamps, left-hand bucket tube on boom to bucket cylinder closed end, Includes: Ref. 36
36	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
37	D40236	CLAMP	- hose
38	814-10055	BOLT,Hex, M10 x 1.5 x 55mm, Cl 8.8	- hex, 10 - 1.5 x 55 mm
39	832-10410	NUT,M10 x 1.5, Cl 8	NUT, LOCK, M10 x 1.5, Cl 8
40	218-737	UNION,1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree	CONNECTOR - straight, 1-1/16-12 inch flare
41	182222A1	FITTING	RESTRICTOR - check, 4.36 mm orifice, bucket section upper port, if used