| № | Номер | Название | Опции | Альт |
|---|
| 1 | A47494 | STARTING MOTOR | Starter Assembly - remanufactured | |
| 1 | A47495 | CORE-STARTER | Return Part Number - Use this part number to return starter core for credit | |
| | The R29870 subs to 104202A2R. This starter changed from a 10-tooth gear to a 9-tooth gear for faster cranking speed. This changed the nose piece in the area of the offset. Megavolt gets more cores in on the 10-tooth gear and the offset is only .050 diff. between the two gears. At times the nose pieces get mixed up and the result is the starter gear won't mesh with the ring gear unless the starter mounting bolts are loose. On 2/26/96 (MEGA-VOLT) is in process of designing a fixture to readily identify the different nose pieces. | | |
| 1 | 104202A2R | REMAN-STARTER | Starter Assembly - new (Delco-Remy No. 1109149) (Replaces R29870) Includes: Ref. 2 - 36 on this figure and Ref. 46 - 64 on Figure 76 | |
| 1 | 104202A1C | CORE-STARTER | Return Part Number | |
| 1 | 87297364 | REMAN-STARTER | Starter | |
| 1 | 87297365 | CORE-STARTER | Return Part Number | |
| 2 | A25304 | FRAME | FRAME ASSEMBLY - commutator end, Includes: Ref. 3 - 5 | |
| 3 | A45152 | BUSHING | BUSHING - frame | |
| 4 | A41979 | WICK | WICK - oiler | |
| 5 | 221-1041 | PLUG | PLUG - slotted head, 1/8 inch PT | |
| 6 | A40217 | HOLDER | HOLDER - brush (grounded) | |
| 7 | A49472 | HOLDER | HOLDER - brush (insulated) (Replaces R15027) | |
| 8 | A25359 | SPRING | SPRING - brush pressure | |
| 9 | A25356 | BRUSH, COMMUTATOR | BRUSH BRUSH - armature | |
| 10 | D32481 | SELF-TAP SCREW,Sltd Pan Hd, #8-32 x 13/16", w/LW | SCREW ASSEMBLY - brush to insulated holder | |
| 11 | A42124 | SCREW,#8 - 32 x 5/8" | SCREW ASSEMBLY - brush to grounded holder | |
| 12 | A25379 | KIT | SUPPORT KIT - brush holder, Includes: Ref. 13 - 18 | |
| 13 | NSS | NOT SOLD SEPARAT | SUPPORT | |
| 14 | 173-212 | SCREW,Sl Rnd Hd, #10 - 24 x 1/2" | SCREW - round head, No. 10-24 x 1/2 inch | |
| 15 | 192-18 | LOCK WASHER,Helical Spring, #10, 0.196" ID, CST, ZND | WASHER, LOCK, #10 | |
| 16 | 129-17 | NUT,Hex, #10 - 24 | NUT - No. 10-24 hex | |
| 17 | R15035 | PIN | PIN - brush holder | |
| 18 | A42494 | ELECTRICAL WIRE | WIRE LEAD - brush ground | |
| 19 | NSS | NOT SOLD SEPARAT | FRAME - starter body | |
| 20 | A25548 | COIL | COIL ASSEMBLY - field | |
| 21 | A25391 | SHOE | SHOE - pole | |
| 22 | A42127 | SCREW,3/8" - 24 x 0.20" | SCREW - pole shoe | |
| 23 | A40225 | CONNECTOR, ELEC | CONNECTOR CONNECTOR -, Serial Range: field-solenoid | |
| 24 | A41980 | GROMMET | GROMMET - connector insulating (in frame) | |
| 25 | 173-221 | SCREW,Sl Rnd Hd, #10 - 32 x 7/16" | SCREW - round head, No. 10-32 x 7/16 inch | |
| 26 | 192-18 | LOCK WASHER,Helical Spring, #10, 0.196" ID, CST, ZND | WASHER, LOCK, #10 | |
| 27 | A25547 | ARMATURE | ARMATURE | |
| 28 | A41917 | WASHER,14.25mm ID x 24.89mm OD x 1.57mm Thk | WASHER - thrust (at commutator end) | |
| 29 | A40215 | PLATE ASSY. | PLATE ASSEMBLY - center bearing, Includes: Ref. 30 | |
| 30 | R15038 | BUSHING | BUSHING - center bearing | |
| 31 | A41959 | SCREW,#10 - 32 x 3/8" | SCREW - center bearing to drive housing | |
| 32 | R15043 | WASHER | WASHER - thrust, center bearing | |
| 33 | A45565 | DRIVE | DRIVE ASSEMBLY | |
| 33 | 87421540 | REMAN-STARTER DRIVE | 480D, 480LL, Both CASE CONSTRUCTION KING LOADER BACKHOE, DRIVE ASSEMBLY, Reman for New PN A45565 | |
| 33 | 87421541 | CORE-STARTER DRIVE | Return Part Number | |
| 34 | R15049 | COLLAR | COLLAR - drive stop | |
| 35 | R15048 | RING | RING - snap, stop collar retaining | |
| 36 | A25385 | WASHER | WASHER - thrust (Drive end) | |
