| № | Номер | Название | Опции | Альт |
|---|
| G110694 | CYLINDER ASSY.,Double Acting, 63.5mm Rod, 119.9mm Stroke | CYLINDER ASSEMBLY - dozer tilt, 5 (127) ID x 4-3/4 inch (120 mm) stroke, Includes: Ref. 1 - 22 | | | 87377322R | REMAN-HYD CYLINDER | 1150E, 1155E, CASE CRAWLER TRACTOR, Both CYLINDER ASSEMBLY - dozer tilt, 5 (127) ID x 4-3/4 inch (120 mm) stroke, Reman for New PN G110694 | | | 87377322C | CORE-HYD CYLINDER | Return Number | | | 1 | G109824 | TUBE,4.995" ID x 16.14" L | - cylinder | | | 2 | D23601 | HOUSING | BUSHING - self aligning, heavy duty, sealed | | | 3 | 100-21315 | SNAP RING,3.156", Int, #315 | Ring, Snap, , Bushing 3.156", Int, #315 | | | 4 | 1543069C1 | PACKING GLAND | GLAND - cylinder | | | 5 | G108713 | WIPER,63.45mm ID x 82.58mm OD x 10.03mm Thk | - piston rod, if used | | | | Part of Seal Kit, P/N 1542915C2 | | | | 6 | G109228 | SEAL,63.45mm ID x 76.25mm OD x 10.69mm Thk | - U-cup, piston rod, wide, with O-ring | | | | Part of Seal Kit, P/N 1542915C2 | | | | 6 | G100780 | SEAL | - U-cup, piston rod, service option - severe heat or cold | | | 7 | G107998 | SEAL,63.07mm ID x 79.2mm OD x 4.9mm Thk | - piston rod, narrow | | | | Part of Seal Kit, P/N 1542915C2 | | | | 8 | G102427 | BUSHING,63.5mm ID x 60.22mm OD x 37.85mm L | - center | | | | Part of Seal Kit, P/N 1542915C2 | | | | 9 | G107970 | BACK-UP RING,120.27mm ID x 127.13mm OD x 1.4mm Thk | Gland O-Ring | | | | Part of Seal Kit, P/N 1542915C2 | | | | 10 | 238-5247 | O-RING,0.139" Thk x 4.609" ID, -247, Cl 5, 75 Duro | Gland -247, 70 Duro, 4.609" ID x .139" Thk | | | | Part of Seal Kit, P/N 1542915C2 | | | | 11 | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 ", slotted | | | 12 | 1346161C1 | PISTON ROD | ROD - piston, 63.5 mm diameter, was G110695, Includes: Ref. 13 & 14 | | | 13 | D23601 | HOUSING | BUSHING - self aligning, heavy duty, sealed | | | 14 | 100-21315 | SNAP RING,3.156", Int, #315 | Ring, Snap, 3.156", Int, #315 | | | 15 | G110701 | JACK PISTON | PISTON - cylinder | | | 16 | G102090 | RING,127mm OD, Ext | - wear | | | | Part of Seal Kit, P/N 1542915C2 | | | | 17 | 1986753C1 | SEAL,Locking, 123.8mm ID x 128.52mm OD x 6.96mm Thk | - piston, was G102091 | | | | Part of Seal Kit, P/N 1542915C2 | | | | 18 | G102092 | RING,Square, 5.28mm Thk x 113.92mm ID | - backup, piston seal | | | | Part of Seal Kit, P/N 1542915C2 | | | | 19 | 28-2048 | BOLT,Hex, 1-1/4" - 12 x 3", Gr 8 | | | | 20 | G104989 | WASHER,34.29mm ID x 60.3mm OD x 4.78mm Thk | - flat, hardened, special | | | 21 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | | | 22 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | FITTING - grease, 45 degree, 1/8 PT x 7/8 inch, short | | | 1542915C2 | SEAL KIT | KIT - seal, includes Refs. 5 - 10 (except G100780), & 16 - 18 | |
|
|