| № | Номер | Название | Опции | Альт |
|---|
| G107405 | CYLINDER | ASSEMBLY - dozer tilt, 4-1/2 (114) ID x 5-1/4 inch (134 mm) stroke, with 2 piece piston, no longer used, order 1986748C1 cylinder assembly, Includes: Ref. 1 - 24 | |
| 1986748C1 | CYLINDER ASSY. | CYLINDER ASSEMBLY - dozer tilt, 4-1/2 (114) ID x 5-1/4 inch (133 mm) stroke, with 1 piece piston, Includes: Ref. 1 - 24 | |
| 1 | G107406 | TUBE | - cylinder, Includes: Ref. 2 | |
| 2 | D33047 | BUSHING,44.68mm ID x 53.98mm OD x 22.23mm L | - tube | |
| G104949 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 3 - 10 | |
| 3 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 4 | G102569 | PLUG | - nylon, thread-locking, gland, if used | |
| 5 | D95145 | WIPER SEAL,54.79mm ID x 70.09mm OD x 7.91mm W | WIPER - piston rod | |
| | Part of Seal Kit, P/N G105520 | | |
| 6 | G102426 | BUSHING,57.15mm ID x 60.22mm OD x 37.85mm L | - Center | |
| | Part of Seal Kit, P/N G105520 | | |
| 7 | G107924 | SEAL,57.1mm ID x 69.9mm OD x 10.69mm Thk | - U-cup, piston rod, wide, with O-ring | |
| | Part of Seal Kit, P/N G105520 | | |
| 7 | G100779 | SEAL | - U-cup, piston rod, service option - severe heat or cold | |
| 8 | G109086 | RING | SEAL - piston rod, narrow | |
| | Part of Seal Kit, P/N G105520 | | |
| 9 | 238-5246 | O-RING,0.139" Thk x 4.484" ID, -246, Cl 5, 75 Duro | Gland -246, 70 Duro, 4.484" ID x .139" Thk | |
| | Part of Seal Kit, P/N G105520 | | |
| 10 | G32284 | BACK-UP RING | - backup, gland O-ring | |
| | Part of Seal Kit, P/N G105520 | | |
| 10 | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 ", slotted, If used | |
| 11 | G107410 | PISTON | ROD - piston, 2-1/4 inch (57 mm) diameter, Includes: Ref. 12 | |
| 12 | D33047 | BUSHING,44.68mm ID x 53.98mm OD x 22.23mm L | - piston rod | |
| 13 | D46425 | PISTON | - split, rod end, G107405 cylinder | |
| 14 | D46931 | PISTON | - split, bolt end, G107405 cylinder | |
| 15 | D47205 | PACKING | - piston, for Ref. 13 & 14 split pistons | |
| | Part of Seal Kit, P/N G105520 | | |
| 16 | D47210 | BEARING WASHER,82.58mm ID x 113.97mm OD x 19mm Thk | RING - wear, packing, for Ref. 13 & 14 split pistons | |
| 17 | 28-2052 | BOLT,Hex, 1-1/4" - 12 x 3-1/4", Gr 8 | - hex, 1-1/4 NF x 3-1/4 inch, grade 8 | |
| 18 | G104989 | WASHER,34.29mm ID x 60.3mm OD x 4.78mm Thk | - flat, hardened, special | |
| 19 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | |
| 20 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 21 | 1986543C1 | PISTON | - cylinder, 1 piece, for 1986748C1 cylinder | |
| 22 | G101994 | SEAL,RECTANGULAR, 111.02mm ID x 115.75mm OD x 6.96mm Thk | - piston, for ref 21 piston and 1986748C1 cylinder | |
| 23 | G101995 | SEALING RING,Square, 5.28mm Thk x 100.71mm ID | RING - backup, for ref 21 piston and 1986748C1 cylinder | |
| 24 | G101996 | WEAR RING,4.5" OD x 0.75" Thk | RING - wear, for ref 21 piston and 1986748C1 cylinder | |
| G105520 | GASKET KIT | KIT - seal, includes Refs. 5 - 10 (except G100779), & 15 | |
