| № | Номер | Название | Опции | Альт |
|---|
| 1 | L108402 | PANEL ASSY. | PANEL - left-hand side | |
| 2 | L109555 | GUARD | LOUVER - side panel | |
| 3 | F64519 | SELF-TAP SCREW,Cross Wash Hd, #10-16 x 3/4" | SCREW - special, self-tapping, Phillips head, with washer, No. 10 - 16 x 3/4 inch | |
| 4 | 131-145 | NUT,J, #10 | - J-type, No. 10 | |
| 5 | L108422 | PLATE | HEADLINER - rear, plastic | |
| 6 | L109988 | ROOF LINING | COVER - defroster, plastic | |
| 7 | F64519 | SELF-TAP SCREW,Cross Wash Hd, #10-16 x 3/4" | SCREW - special, self-tapping, Phillips head, with washer, No. 10 - 16 x 3/4 inch | |
| 8 | NSS | NOT SOLD SEPARAT | SEAL - defroster cover, right-hand, 11-13/16 inch (300 mm) long, cut from F63219, see below | |
| | For noise reduction pads that are glued to the cab frame weldment see Figure 9-60. | | |
| 9 | F45447 | SEAL | - defroster cover, right edge | |
| 10 | NSS | NOT SOLD SEPARAT | SEAL - defroster cover, left-hand, 7 inch (179 mm) long, cut from F63219, see below | |
| | For noise reduction pads that are glued to the cab frame weldment see Figure 9-60. | | |
| 11 | L74714 | MIRROR | - rear view, includes hardware | |
| 12 | L108631 | SEAL | - rubber, adhesive-backed, adheres to item 6, defroster cover | |
| 13 | F45304 | PAD | - defroster cushion, adhesive-backed, adheres to underside of cab roof | |
| 14 | R52564 | DECAL | - fuses, on item 15, right-hand side panel | |
| 15 | R52528 | PANEL | - right-hand side | |
| 16 | R52524 | PANEL | COVER - padded vinyl, right-hand side panel | |
| 17 | R52525 | PANEL | COVER - padded vinyl, left-hand side panel | |
| 18 | R52526 | PANEL | COVER - padded vinyl, rear, behind seat | |
| 19 | R52527 | ROOF | HEADLINER - center, fabric-covered, if used | |
| 20 | R52523 | PANEL | - fuse, right - hand side | |
| 21 | R54556 | RETAINER | - fuse panel | |
| 22 | R54557 | FASTENER | - padded covers | |
| 23 | L123649 | PANEL | COVER - instrument panel, see Figure 4-8 for the instrument panel cluster | |
| 24 | L61261 | ASH TRAY | TRAY - ash | |
| 25 | 182-582 | SCREW,Cross Pan Hd, 1/4"-20 x 3/4" | - machine, pan Phillips head, 1/4 NC x 3/4 inch | |
| 26 | 195-81004 | WASHER,0.31" ID x 0.75" OD x 0.07" Thk | - flat, 5/16 x 3/4 x 1/16 inch, Teflon | |
| 27 | A161723 | WASHER | - special, flat rubber, 1/4 inch | |
| 28 | 182-584 | SCREW,Cross Pan Hd, #10-24 x 3/4" | - machine, pan Phillips head, No. 10 NC x 3/4 inch | |
| 29 | 195-100 | WASHER,#12 | - flat, 1/4 x 9/16 x 3/64 inch | |
| F63219 | FOAM | SEAL - 47 inch (1194 mm) long | |
| | For noise reduction pads that are glued to the cab frame weldment see Figure 9-60. | | |
