| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | CHASSIS ASSEMBLY - parts list Figure 9-426 | | | 2 | D132050 | FUNNEL | FRAME ASSEMBLY - loader lift, Includes: Ref. 3 - 7B | | | 3 | L79365 | BUSHING | - lift frame at chassis | | | 4 | D34354 | BUSHING,44.68mm ID x 53.98mm OD x 38.1mm L | - at lift cylinders | | | 5 | D30930 | BUSHING,38.33mm ID x 47.63mm OD x 17.53mm L | - lift frame at bucket linkage | | | 6 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - lift frame at bucket cylinders | | | 7 | 36121 | BUSHING | - lift frame at bucket | | | 7a | L52234 | BRACKET | - lift arm, welded on, cut, Serial Range: off-replace | | | 7b | L111396 | PLATE ASSY. | PLATE - spacer, lift arm, welded on, cut, Serial Range: off-replace | | | 8 | 80710 | LUBE NIPPLE,1/8” – 27 Dryseal PTF | NIPPLE, LUBE, 1/8"-27 x .66 lg | | | 9 | L57362 | SHAFT | PIN - lower, lift cylinders pivot shaft | | | 10 | L57362 | SHAFT | PIN - upper, lift arm pivot shaft | | | 11 | D34668 | WASHER,52.39mm ID x 76.2mm OD x 3.57mm Thk | - special (Replaces 196-76) | | | 12 | D34664 | RING | - snap, pin retaining | | | 13 | G103457 | CYLINDER BLOCK | CYLINDER ASSEMBLY - loader lift, see Figure 8-340 | | | 14 | D140364 | PIN | - lift cylinder mounting to lift frame, right-hand side only | | | 15 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pin #175, Ext | | | 16 | L103392 | DRAG LINK | LINK ASSEMBLY - includes bushings, bucket link to lift arm, Includes: Ref. 17 | | | 17 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - link at cylinder | | | 18 | L57197 | AXLE PIN | SPACER - link | | | 19 | L74594 | SPACER | - link | | | 20 | 426-12112 | BOLT,Hex, 3/4" - 10 x 7", Gr 8 | - hex head, 3/4" - 10 NC x 7", grade 8, plated | | | 21 | 426-1272 | BOLT,Hex, 3/4" - 10 x 4-1/2", Gr 8 | | | | 22 | 87340 | LOCK WASHER,Helical Spring, 0.759" ID, CST, ZND | WASHER, LOCK, 3/4" | | | 23 | 429-1012 | NUT,3/4"-10, G8 | - hex, 3/4"-10 NC, grade 8, plated | | | 24 | G101220 | CYLINDER ASSY. | CYLINDER ASSEMBLY - bucket tilt, see Figure 8-342 | | | 25 | D34656 | PIN,38.1mm OD x 101.6mm L | - bucket cylinder rod end to lift frame | | | 25a | 495-81293 | WASHER,1.53" ID x 2.06" OD x 0.11" Thk | - flat, 1-1/2", special, plated | | | 26 | D25279 | SNAP RING,M35, Int | RING - snap, pin retaining | | | 27 | L108026 | DRAG LINK | LINK ASSEMBLY - bucket, Includes: Ref. 28, 29 | | | 28 | 36121 | BUSHING | - link, at bucket | | | 29 | D30930 | BUSHING,38.33mm ID x 47.63mm OD x 17.53mm L | - link, at bellcrank | | | 29a | L108411 | BRACKET | - decal mounting, welded to right-hand link, see Figure 9-518 for 321-2654 decal | | | 30 | L105080 | AXLE PIN | PIN - bucket link and lift arm to bucket, used on models without clam bucket, see Figure 9-376, Ref. 19 - 23, for pin and hardware used on models with clam bucket | | | 31 | 495-81282 | WASHER,2 1/16" x 3" x .109" | - flat, 2", plated, special, used with Ref. 30 | | | 32 | 103-16200 | SNAP RING,#200, Ext | Ring, Snap, , Pin, Used with ref. 30 #200, Ext | | | 34 | L78791 | AXLE PIN | PIN - lift cylinder and safety strut mounting, left-hand side only | | | 35 | 495-81234 | WASHER,1.81" ID x 2.5" OD x 0.07" Thk | - flat, 1-3/4", plated, special | | | 36 | D141760 | SUPPORT | STRUT - left-hand side loader lift frame | | | 37 | D132350 | GROMMET | - rubber | | | 38 | 104824A1 | PIN,12.7mm OD | Hitch | | | 39 | 496-11078 | WASHER | - flat, 3/4", plated, special | | | 39a | 493-41078 | LOCK WASHER,Ext Tooth, 3/4" | WASHER - external tooth lock, 3/4", plated | | | 40 | L107670 | LEVEL | INDICATOR - bucket level, right-hand side | |
|
|